When DrivingInstrument Cluster and DisplayMulti-information Display and INFO Switch (Some Models)

Multi-information Display and INFO Switch (Some Models)

The multi-information display indicates the following information.

  • Odometer

  • Trip meter

  • Engine coolant temperature gauge

  • Fuel gauge

  • Outside temperature

  • Distance-to-empty

  • Average fuel economy

  • Current fuel economy

  • Maintenance Monitor

  • Lane Departure Warning System (LDWS) Display

  • Cruise Control Display

  • Compass Display

  • Roof Operation Display

  • Warning message

The screen content changes each time the INFO switch is pressed.

When DrivingInstrument Cluster and DisplayMulti-information Display and INFO Switch (Some Models)

Odometer, Trip Meter and Trip Meter Selector

The odometer is constantly displayed on the screen when the ignition is switched ON, and the TRIP A or TRIP B screen can be displayed by operating the INFO switch.

 

Odometer

The odometer records the total distance the vehicle has been driven.

Trip meter

The driving distance for a specified interval is indicated. Two types (TRIP A, TRIP B) of interval distance and the average fuel economy for each can be measured.

 

For instance, trip meter A can record the distance from the point of origin, and trip meter B can record the distance from where the fuel tank is filled.

 

When trip meter A is selected, TRIP A will be displayed. When trip meter B is selected, TRIP B will be displayed.

 

The trip meter and average fuel economy can be reset by pressing the INFO switch for 1.5 second or more while in each mode.

 

  • Only the trip meters record tenths of kilometers (miles).

  • The trip record will be erased when:

    • The power supply is interrupted (blown fuse or the battery is disconnected).

    • The vehicle is driven over 1999 km (mile).

Close Note
When DrivingInstrument Cluster and DisplayMulti-information Display and INFO Switch (Some Models)

Engine Coolant Temperature Gauge

Displays the engine coolant temperature. The blue gauge indicates that the engine coolant temperature is low, and the red gauge indicates that the engine coolant temperature is high and overheating.

 

If the high engine coolant temperature warning light (red) turns on, there is a possibility of overheating. Park the vehicle in a safe place immediately and take appropriate measures. If the vehicle continues to be driven, it could cause damage to the engine.

Refer to Overheating (Search).

Close Caution

 

  • The temperature unit (Centigrade/Fahrenheit) of the engine coolant gauge display changes in conjunction with the temperature unit of the outside temperature display.

    Refer to Personalization Features (Search).

  • During normal driving, the engine coolant temperature stabilizes at 100 °C (210 °F) or less, and the gauge indicates a range lower than 100 °C (210 °F).

  • If the engine load increases and the engine coolant temperature exceeds 100 °C (210 °F), the gauge indicates the engine coolant temperature.

Close Note
When DrivingInstrument Cluster and DisplayMulti-information Display and INFO Switch (Some Models)

Fuel Gauge

The fuel gauge shows approximately how much fuel is remaining in the tank when the ignition is switched ON. We recommend keeping the tank over 1/4 full.

 

If the fuel level is low, () and () turn an amber color. Refuel as soon as possible.

Refer to Taking Action (Search) .

 

  • After refueling, it may require some time for the indicator to stabilize. In addition, the indicator may deviate while driving on a slope or curve since the fuel moves in the tank.

  • The display indicating a quarter or less remaining fuel has more segments to show the remaining fuel level in greater detail.

  • The direction of the arrow () indicates that the fuel-filler lid is on the left side of the vehicle.

Close Note
When DrivingInstrument Cluster and DisplayMulti-information Display and INFO Switch (Some Models)

Outside Temperature Display

When the ignition is switched ON, the outside temperature is displayed.

 

 

Under the following conditions, the outside temperature display may differ from the actual outside temperature depending on the surroundings and vehicle conditions:

  • Significantly cold or hot temperatures.

  • Sudden changes in outside temperature.

  • The vehicle is parked.

  • The vehicle is driven at low speeds.

Close Note

Changing the Temperature Unit of the Outside Temperature Display

The outside temperature unit can be switched between Celsius and Fahrenheit using the following procedure.

(Vehicles with Type B)

Settings can be changed by operating the center display screen.

Refer to Personalization Features (Search).

(Vehicles without Type B)

  1. Press the INFO switch with the ignition switched off and continue pressing the INFO switch for 5 seconds or longer while switching the ignition ON. The outside temperature display flashes.

  2. Press the INFO switch to change the outside temperature unit.

  3. Press and hold the INFO switch for 3 seconds or longer while the outside temperature display is flashing. The outside temperature display illuminates.

 

When the temperature unit indicated in the outside temperature display is changed, the temperature unit indicated in the engine coolant gauge display changes in conjunction with it.

Close Note
When DrivingInstrument Cluster and DisplayMulti-information Display and INFO Switch (Some Models)

Distance-to-empty

This displays the approximate distance you can travel on the remaining fuel based on the fuel economy.

The distance-to-empty will be calculated and displayed every second.

 

 

  • Even though the distance-to-empty display may indicate a sufficient amount of remaining driving distance before refueling is required, refuel as soon as possible if the fuel level is very low or the low fuel warning light illuminates.

  • The display will not change unless you add more than approximately 9 L (2.3 US gal, 1.9 Imp gal) of fuel.

  • The distance-to-empty is the approximate remaining distance the vehicle can be driven until all the graduation marks in the fuel gauge indicating the remaining fuel supply disappear.

  • If there is no past fuel economy information such as after first purchasing your vehicle or the information is deleted when the battery cables are disconnected, the actual distance-to empty/range may differ from the amount indicated.

Close Note
When DrivingInstrument Cluster and DisplayMulti-information Display and INFO Switch (Some Models)

Average Fuel Economy

This mode displays the average fuel economy by calculating the total fuel consumption and the total traveled distance since purchasing the vehicle, re-connecting the battery after disconnection, or resetting the data.

The average fuel economy is calculated and displayed every minute.

 

To clear the data being displayed, press the INFO switch for more than 1.5 seconds. After pressing the INFO switch, - - - L/100 km (- - - mpg) will be displayed for about 1 minute before the fuel economy is recalculated and displayed.

When DrivingInstrument Cluster and DisplayMulti-information Display and INFO Switch (Some Models)

Current Fuel Economy

This displays the current fuel economy by calculating the amount of fuel consumption and the distance traveled.

Current fuel economy will be calculated and displayed every two seconds.

 

When you've slowed to about 5 km/h (3 mph), - - - L/100 km (- - - mpg) will be displayed.

When DrivingInstrument Cluster and DisplayMulti-information Display and INFO Switch (Some Models)

Maintenance Monitor

The following maintenance period notifications can be displayed by turning the Maintenance Monitor on.

  • Scheduled Maintenance

  • Tire Rotation

  • Oil Change

For the setting method and indications for the maintenance monitor, refer to the Maintenance Monitor.

Refer to Maintenance Monitor (Search).

The maintenance monitor displays the information when the ignition is switched ON.

 

This function is inoperable while the vehicle is being driven.

Close Note

Message display

When the remaining time or the distance approaches 0, a message is displayed each time the ignition is switched ON.

 

  • If any of the INFO switch is pressed while a message is displayed, it will no longer be displayed the next time the ignition is switched ON.

  • After the vehicle is serviced and the remaining time/distance is reset, the message for the next maintenance period will be displayed when the remaining distance or time to the next maintenance period approaches 0 (displays when engine is started).

  • If there are multiple messages, they are displayed according to their order.

  • If OFF is set for Messages, messages are not displayed.

Close Note
When DrivingInstrument Cluster and DisplayMulti-information Display and INFO Switch (Some Models)

Lane Departure Warning System (LDWS) Display (Some Models)

Displays the system status.

 

Refer to Lane Departure Warning (Search).

When DrivingInstrument Cluster and DisplayMulti-information Display and INFO Switch (Some Models)

Cruise Control Set Vehicle Speed Display

The vehicle speed preset using the cruise control is displayed.

 

When DrivingInstrument Cluster and DisplayMulti-information Display and INFO Switch (Some Models)

Compass Display

The direction the vehicle is moving is displayed in one of the eight cardinal directions while the vehicle is being driven.

 

Display

Direction

N

North

S

South

E

East

W

West

NE

Northeast

NW

Northwest

SE

Southeast

SW

Southwest

When DrivingInstrument Cluster and DisplayMulti-information Display and INFO Switch (Some Models)

Roof Operation Display

Displays the roof operation status.

 

Refer to Operation Indication (Search).

When DrivingInstrument Cluster and DisplayMulti-information Display and INFO Switch (Some Models)

Warning (Display Indication)

A message is displayed to notify the user of the system operation status and malfunctions or abnormalities.

If the warning light turns on/flashes simultaneously or a symbol is indicated in the display, check the information regarding the warning light or symbol. (Search)

When only a message is displayed, refer to Message Indicated in Multi-information Display. (Search)