Child-Restraint
Child-Restraint System Suitability for Various Seat Positions Table
(Mexico)
Provided information in the table shows your child-restraint system suitability for various seating position. For installation suitability of other manufacturer child-restraint system, carefully consult the manufacturer's instructions which accompany the child-restraint system.
When installing a child-restraint system, the following points must be observed:
-
If the child-restraint system does not fit into the seatback because of the head restraint, adjust the head restraint or remove the head restraint so that the child-restraint system fits into the seatback. However, when installing a backless booster seat, always install the vehicle head restraint to the seat where the backless booster seat is installed.
Refer to Head Restraints (Search).
-
When installing a child-restraint system to the rear seat, adjust the front seat position so that the front seat does not contact the child-restraint system.
Refer to Seat Operation (Search).
-
When installing a child-restraint system came equipped with a tether, remove the head restraint.
Refer to Head Restraints (Search).
LATCH lower anchor-secured child-restraint systems
When installing a child-restraint system to the rear seat, refer to the child-restraint system manufacturer's instructions and the Using LATCH Lower Anchor (Search).
|
Mass group |
Size Class |
Fixture |
Seat Positions |
||
|---|---|---|---|---|---|
|
Vehicle LATCH positions |
Rear seat (center) |
Front passenger seat (outboard) |
|||
|
Rear seat (outboard) |
|||||
|
Carrycot |
F |
ISO/L1 |
X |
X |
X |
|
G |
ISO/L2 |
X |
X |
X |
|
|
(1) |
X |
X |
X |
||
|
GROUP 0 Up to 10 kg (up to 22 lb) |
E |
ISO/R1 |
IL |
X |
X |
|
(1) |
X |
X |
X |
||
|
GROUP 0 Up to 13 kg (up to 29 lb) |
E |
ISO/R1 |
IL |
X |
X |
|
D |
ISO/R2 |
IL |
X |
X |
|
|
C |
ISO/R3 |
IL |
X |
X |
|
|
(1) |
X |
X |
X |
||
|
GROUP 1 9 kg ― 18 kg (20 lb ― 40 lb) |
D |
ISO/R2 |
IL |
X |
X |
|
C |
ISO/R3 |
IL |
X |
X |
|
|
B |
ISO/F2 |
IUF |
X |
X |
|
|
B1 |
ISO/F2X |
IUF |
X |
X |
|
|
A |
ISO/F3 |
IUF |
X |
X |
|
|
(1) |
X |
X |
X |
||
|
GROUP 2 15 kg ― 25 kg (33 lb ― 55 lb) |
(1) |
X |
X |
X |
|
|
GROUP 3 22 kg ― 36 kg (48 lb ― 79 lb) |
(1) |
X |
X |
X |
|
(1) For the CRS which do not carry the ISO/XX size class identification (A to G), for the applicable mass group, the car manufacturer shall indicate the vehicle specific LATCH child-restraint system(s) recommended for each position.
Key of letters to be inserted in the above table:
IUF = suitable for LATCH forward child-restraints systems of universal category approved for use in this mass group.
IL = suitable for particular LATCH child-restraint systems (CRS).
These LATCH CRS are those of the “specific vehicle”, “restricted” or “semi-universal” categories.
A Mazda genuine child-restraint system can be installed. Regarding child-restraint systems which can be installed, refer to the accessories catalog.
X = LATCH position not suitable for LATCH child-restraint systems in this mass group and/or this size class.
When installing a child-restraint system, the following points must be observed:
-
Always remove the head restraint before installing a child-restraint system. However, when installing a backless booster seat, always install the vehicle head restraint to the seat where the backless booster seat is installed. In addition, always use a tether strap and attach it securely. Refer to Head Restraints (Search).
-
When installing a child-restraint system to the rear seat, adjust the front seat position so that the front seat does not contact the child-restraint system. Refer to Seat Operation (Search).
i-Size child-restraint systems
An i-Size child-restraint system can be installed to the specified seat as follows:
|
Front passenger seat |
Rear seat (outboard) |
Rear seat (center) |
|
|---|---|---|---|
|
i-Size child-restraint systems |
X |
X |
X |
Key of letters to be inserted in the above table:
X = Seating position not suitable for i-Size “universal” child-restraint systems.
An i-Size child-restraint system refers to a child-restraint system which has acquired i-Size category certification for the UNECE 129 regulation.
Seat belt-secured child-restraint systems
|
System group |
Age group |
Weight group |
Child-restraint system type |
Front passenger seat |
Rear seat (outboard) |
Rear seat (center) |
|---|---|---|---|---|---|---|
|
GROUP 0 |
Up to about 9 months old |
Up to 10 kg (up to 22 lb) |
Infant seat |
X |
U |
L*1 |
|
GROUP 0 |
Up to about 2 years old |
Up to 13 kg (up to 29 lb) |
Infant seat |
X |
U |
L*1 |
|
GROUP 1 |
About 8 months to 4 years old |
9 kg ― 18 kg (20 lb ― 40 lb) |
Child seat |
L*2 |
U |
X |
|
GROUP 2 |
About 3 to 7 years old |
15 kg ― 25 kg (33 lb ― 55 lb) |
Booster seat |
L*2 |
U |
X |
|
GROUP 3 |
About 6 to 12 years old |
22 kg ― 36 kg (48 lb ― 79 lb) |
Booster seat |
L*2 |
U |
X |
Key of letters to be inserted in the above table:
U = Suitable for “universal” category restraints approved for use in this mass group.
L = A Mazda genuine child-restraint system can be installed. Regarding child-restraint systems which can be installed, refer to the accessories catalog.
X = Seat position not suitable for children in this mass group.
-
When a child-restraint system is installed to the rear center seat, do not seat occupants in the rear right outboard seat position.
-
When installing a child-restraint system to the front passenger seat, adjust the seat slide position as far back as possible. Adjust the seat bottom to the highest position so that the seat belt can securely fasten the child-restraint system.
Refer to Seat Operation (Search).
When installing a child-restraint system, the following points must be observed:
-
Always remove the head restraint before installing a child-restraint system. However, when installing a backless booster seat, always install the vehicle head restraint to the seat where the backless booster seat is installed. In addition, always use a tether strap and attach it securely. Refer to Head Restraints (Search).
-
When installing a child-restraint system to the rear seat, adjust the front seat position so that the front seat does not contact the child-restraint system. Refer to Seat Operation (Search).
(Except Mexico)
Please comply with the legal regulations concerning the use of child-restraint systems in your country.
