Climate Control System

Manual Climate Control

Windshield Defrosting and Defogging

  1. Set the mode selector dial to the position.

  2. Set the temperature control dial to the desired position.

  3. Set the fan control dial to the desired speed.

  4. If dehumidified heating is desired, turn on the air conditioner.

 

Do not defog the windshield using the position with the temperature control set to the cold position:

Using the position with the temperature control set to the cold position is dangerous as it will cause the outside of the windshield to fog up. Your vision will be hampered, which could lead to a serious accident. Set the temperature control to the hot or warm position when using the position.

Close Warning
View Warning

 

  • For maximum defrosting, turn on the air conditioner, set the temperature control dial to the extreme hot position, and turn the fan control dial fully clockwise.

  • If warm air is desired at the floor, set the mode selector dial to the position.

  • In the or position, the air conditioner is automatically turned on and the outside air position is automatically selected to defrost the windshield. In the or position, the outside air position cannot be changed to the recirculated air position.

Close Note
View Note

Page top