Instrument Cluster and Display

Instrument Cluster (Type A)

Current Fuel Economy

This displays the current fuel economy by calculating the amount of fuel consumption and the distance traveled.

Indicates the 0 position when the vehicle speed is about 5 km/h (3 mph) or slower.
The red arrow on the scale indicates the average fuel economy.

Close Note

View Note

Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) Display

Displays the system status.

Refer to Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) (Search).

Instrument Cluster (Type B)

Fuel Gauge

The fuel gauge shows approximately how much fuel is remaining in the tank when the ignition is switched ON. We recommend keeping the tank over 1/4 full.

If the fuel level is low, () and () turn an amber color. Refuel as soon as possible.

If inconsistency in engine performance or stalling occurs due to low fuel level conditions, refuel the vehicle as soon as possible and add at least 10 L (2.7 US gal, 2.2 Imp gal) of fuel.

Refer to Taking Action (Search).

After refueling, it may require some time for the indicator to stabilize. In addition, the indicator may deviate while driving on a slope or curve since the fuel moves in the tank.
The direction of the arrow () indicates that the fuel-filler lid is on the left side of the vehicle.

Close Note

View Note

Blind Spot Monitoring (BSM) Display

Displays the system status.

Refer to Blind Spot Monitoring (BSM) (Search).

Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) Display (Some Models)

Displays the currently set system status.

Refer to Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) (Search).

Instrument Cluster (Type C)

Speedometer

The speedometer indicates the speed of the vehicle.

Trip Computer

The following information can be selected by pressing the INFO switch with the ignition switched ON.

Distance-to-empty mode
Average fuel economy mode
Current fuel economy mode
Compass mode

If you have any problems with your trip computer, consult an Authorized Mazda Dealer.

Distance-to-empty mode

This mode displays the approximate distance you can travel on the remaining fuel based on the fuel economy.

The distance-to-empty will be calculated and displayed every second.

Even though the distance-to-empty display may indicate a sufficient amount of remaining driving distance before refueling is required, refuel as soon as possible if the fuel level is very low or the low fuel warning light illuminates.
The display may not change unless you add more than approximately 9 L (2.3 US gal, 1.9 Imp gal) of fuel.
The distance-to-empty is the approximate remaining distance the vehicle can be driven until all the graduation marks in the fuel gauge (indicating the remaining fuel supply) disappear.
If there is no past fuel economy information such as after first purchasing your vehicle or the information is deleted when the battery cables are disconnected, the actual distance-to empty/range may differ from the amount indicated.

Close Note

View Note

Average fuel economy mode

This mode displays the average fuel economy by calculating the total traveled distance and the total fuel consumption since the vehicle was purchased or the past data was reset. The average fuel economy is calculated and displayed every minute.

To reset the displayed past data, press the INFO switch for 1.5 seconds or longer.

After resetting the data, - - - L/100 km (- - - mpg) is displayed for one minute before the fuel economy is recalculated and displayed.

If TRIP A is reset using the trip meter when the function which synchronizes (resets) the fuel economy monitor and the trip meter (TRIP A) is on, the displayed past data is reset.

Close Note

View Note

Current fuel economy mode

This mode displays the current fuel economy by calculating the amount of fuel consumption and the distance traveled.

Current fuel economy will be calculated and displayed every 2 seconds.

When you've slowed to about 5 km/h (3 mph), - - - L/100 km (- - - mpg) will be displayed.

Compass mode

The direction the vehicle is moving is displayed in one of eight directions while the vehicle is being driven.

Display	Direction
N	North
S	South
E	East
W	West
NE	Northeast
NW	Northwest
SE	Southeast
SW	Southwest

Warning Indication/Warning Lights

These lights turn on or flash to notify the user of the system operation status or a system malfunction.

Signal	Warning	Page
	Brake System Warning Light^12	(Search)
	ABS Warning Light^*1	Electronic Brake Force Distribution System Warning (Search)
	ABS Warning Light^*1	ABS warning (Search)
	Charging System Warning Light^*1	(Search)
	Engine Oil Warning Light^*1	(Search)
	Power Steering Malfunction Indicator Light^*1	(Search)
	Master Warning Light^*1	(Search)
	Electric Parking Brake (EPB) Warning Light^*1	(Search)
(Red)	Brake Pedal Operation Demand Warning Light^*1	Flashing (Search)
(Red)	Brake Pedal Operation Demand Warning Light^*1	Buzzer & Flashing (Search)
	Check Engine Light^*1	(Search)
	Automatic Transaxle Warning Light^*1	(Search)
	AWD Warning Light (Some Models)	(Search)
	Air Bag/Front Seat Belt Pretensioner System Warning Light^*1	(Search)
	Tire Pressure Monitoring System Warning Light^*1	Flashing (Search)
	Tire Pressure Monitoring System Warning Light^*1	Turns on (Search)
(Red)	KEY Warning Light^*1	Turns on (Search)
(Red)	KEY Warning Light^*1	Flashing (Search)
	LED Headlight Warning Light^*1	(Search)
(Amber)	Smart City Brake Support (SCBS) Warning Light^*1 (Some Models)	(Search)
	Low Fuel Warning Light	(Search)
	Check Fuel Cap Warning Light^*1	(Search)
	Engine Oil Level Warning Light^*1	(Search)
	Seat Belt Warning Light (Front seat)	(Search)
(Red)	Seat Belt Warning Light (Rear seat)	(Search)
	Low Washer Fluid Level Warning Light (Some Models)	(Search)
	Door-Ajar Warning Light	(Search)

The light turns on when the ignition is switched on for an operation check, and turns off a few seconds later or when the engine is started. If the light does not turn on or remains turned on, have the vehicle inspected at an Authorized Mazda Dealer.
The light turns on continuously when the parking brake is applied.

Wrench Indicator Light

When the ignition is switched ON, the wrench indicator light turns on and then turns off after a few seconds.

The wrench indicator light turns on under the following conditions:

When the preset maintenance period has arrived.
When it’s time to replace the engine oil.

Refer to the Information section in the Mazda Connect Owner's Manual.

The wrench indicator light turns on earlier than the preset period depending on vehicle usage conditions.
Whenever the engine oil is replaced, a reset of the vehicle engine control unit is necessary.

Refer to the Information section in the Mazda Connect Owner's Manual.

Close Note

View Note

Active Driving Display (Some Models)