Security System

Theft-Deterrent System (Some Models)

How to Arm the System

  1. Close the windows and the moonroof (Some Models) securely.

  2. Switch the ignition OFF.

  3. Make sure the hood, the doors, and the liftgate/trunk lid are closed.

  4. Press the lock button on the transmitter.

    The hazard warning lights will flash once.

    The following method will also arm the theft-deterrent system:

    Press the door-lock switch “” while any door is open and then close all of the doors.

    (With the advanced keyless function)

    Touch the sensing area of the door lock touch sensor.

     

    The security indicator light in the instrument cluster flashes twice per second for 20 seconds.

  5. After 20 seconds, the system is fully armed.

 


  • The theft-deterrent system can also be armed by activating the auto relock function with all the doors, the liftgate/trunk lid and the hood closed.

    Refer to Transmitter (Search).

  • The system will disarm if one of the following operations takes place within 20 seconds after pressing the lock button:

    • Unlocking any door.

    • Opening any door.

    • Opening the hood.

    • Switching the ignition ON.

    To rearm the system, do the arming procedure again.

  • When the doors are locked by pressing the lock button on the transmitter while the theft-deterrent system is armed, the hazard warning lights will flash once to indicate that the system is armed.

Page top