Windows

Power Windows

Opening/Closing Windows

The window opens while the switch is pressed and it closes while the switch is pulled up with the power switch switched ON.

The front passenger's window can be opened/closed when the power window lock switch on the driver's door is in the unlocked position. Keep this switch in the locked position while children are in the vehicle.

 

Master control switches

  1. Close

  2. Open

  3. Passenger's window

  4. Power window lock switch

  5. Driver's window

  6. Locked position

  7. Unlocked position

 

Passenger's window switch

  1. Close

  2. Open

 

 

  • A power window may no longer open/close if you continue to press the switch for a long time. If the power window does not open/close, wait for a while and then operate the switch again.

  • The passenger windows may be opened or closed using the master control switches on the driver's door.

  • The power window can be operated for about 40 seconds after the power switch is switched from ON to ACC or off with all doors closed. If any door is opened, the power window will stop operating.

Close Note
View Note

Auto-opening/Closing

To fully open the window automatically, press the switch completely down, then release. The window will fully open automatically.

To fully close the window automatically, pull the switch completely up, then release. The window will fully close automatically.

 

To stop the window partway, pull or press the switch in the opposite direction and then release it.

 

Power window system initialization procedure

If you operate the switch any number of times with the power window not fully closed, the window may no longer fully open/close automatically.

The power window auto function will only resume on a power window that has been reset.

  1. Switch the power switch ON.

  2. Make sure that the power window lock switch located on the driver's door is not depressed.

  3. Press the switch and fully open the window.

  4. Pull up the switch to fully close the window and continue holding the switch for about 2 seconds after the window fully closed.

  5. Make sure that the power windows operate correctly using the door switches.

Close Note
View Note
Moonroof (Some Models)

Moonroof (Some Models)

Page top