Windows
Power Windows
The windows can be opened/closed by operating the power window switches.
Make sure the opening is clear before closing a window:
Closing a power window is dangerous. A person's hands, head, or even neck could be caught by the window and result in serious injury or even death. This warning applies especially to children.
Never allow children to play with power window switches:
Power window switches that are not locked with the power window lock switch would allow children to operate power windows unintentionally, which could result in serious injury if a child's hands, head or neck becomes caught by the window.
Make sure nothing blocks the window just before it reaches the fully closed position or while fully holding up the power window switch:
Blocking the power window just before it reaches the fully closed position or while fully holding up the power window switch is dangerous.
In this case, the jam-safe function may not prevent the window from closing all the way. If fingers are caught, serious injuries could occur.
Do not let a child put a hand or head out of the window while driving the vehicle:
If the person's hand or head hits something outside the vehicle, or sudden braking is applied, it could result in serious injury or death.
Auto-opening/Closing
To fully open the window automatically, press the switch completely down, then release. The window will fully open automatically.
To fully close the window automatically, pull the switch completely up, then release. The window will fully close automatically.
To stop the window partway, pull or press the switch in the opposite direction and then release it.
Power window system initialization procedure
If you operate the switch any number of times with the power window not fully closed, the window may no longer fully open/close automatically.
The power window auto function will only resume on a power window that has been reset.
-
Switch the power switch ON.
-
Make sure that the power window lock switch located on the driver's door is not depressed.
-
Press the switch and fully open the window.
-
Pull up the switch to fully close the window and continue holding the switch for about 2 seconds after the window fully closed.
-
Make sure that the power windows operate correctly using the door switches.
Jam-safe Window
When the window is closing and a foreign object is detected between the window and the window frame, the window stops closing and automatically opens partway.
-
The jam-safe function may operate under the following conditions:
-
A strong impact is detected while the window is closing.
-
The window is closing in very low temperatures.
-
-
(A window cannot be closed)
If the jam-safe function has operated and the window cannot be closed, check around the window frame for a foreign object.
If there is no foreign object around the window frame, forcibly close a window using the following procedure.
-
After switching the power switch OFF, wait for 45 seconds or longer.
-
Switch the power switch ON.
-
Operate the switch in the direction to close the window until the jam-safe function operates and the window stops. Repeat this operation a total of 5 times.
-
Continue pulling up the switch to fully close the window.
-
