Climate Control System
Touch Panel Basic Operation
Do not press the screen strongly or press it with a sharp-pointed object. Otherwise, the screen could be damaged.
Touch panel operation
You can do three types of icon operations on the touch panel using your finger including, touch, touch and hold, and swipe operations.
Switching between auto and manual operation screens
Touch the seat indication in the center of the screen to switch from the auto operation screen to the manual operation screen. Press the AUTO switch to switch from the manual operation screen to the auto operation screen.
AUTO Switch
By pressing the AUTO switch the following functions will be automatically controlled in accordance with the selected set temperature:
-
Airflow temperature
-
Amount of airflow
-
Selection of airflow mode
-
Outside/Recirculated air selection
-
Air conditioner (cooling, defrosting functions) operation
-
Seat warmer level selection*1 (Some Models)
-
Heated steering wheel operation*1 (Some Models)
-
Auto mode operates when auto mode is enabled in the Mazda Connect settings.
Refer to the Settings section in the Mazda Connect Owner's Manual.
AUTO switch indicator light
-
ON
The indicator light turns on during auto operation.
-
OFF
When any switch or icon is operated during auto operation, including the
, 
, 
, 
, 
, 
, 
, the fan control switch, or the defroster switch, the indicator light turns off. At this time, the functions other than the one operated operate automatically.
ECO Icon
ECO mode switches on/off each time the icon is touched.
The operation frequency of the air conditioner in ECO mode is less than in normal mode, making driving more economical.
Air Intake Selector Icon
Outside or recirculated air positions can be selected. Touch the 
to select outside/recirculated air positions.
Do not recirculate the air in the cabin during cold or rainy weather:
Recirculating the air in the cabin during cold and rainy weather is dangerous as it will cause the windows to fog up. Your vision will be hampered, which could lead to a serious accident.
Recirculated air position (Indicator light next to the turns on)
Outside air is shut off. Use this position when going through tunnels, driving in congested traffic (high engine exhaust areas) or when quick cooling is desired.
Outside air position (Indicator light next to the turns off)
Outside air is allowed to enter the cabin. Use this mode for ventilation or windshield defrosting.
Air Conditioner Basic Operation
Operate the air conditioner (cooling, defrosting functions) with the EV system started. The air conditioner can be used while charging when the power switch is switched ON. In addition, Cabin preconditioning can also be used when the power switch is switched OFF.
When the charging is completed with the power switch switched ON, the air conditioner (cooling, heating, defrosting functions) stops automatically.
-
Press the AUTO switch. Selection of the airflow mode, air intake selector and amount of airflow will be automatically controlled.
-
Operate the temperature setting switch/
(red) or 
(blue) to set the desired temperature.
-
The recommended set temperature is 25 °C (77 °F).
-
Setting the temperature to maximum hot or cold will not provide the desired temperature at a faster rate.
-
The power consumption of the air conditioner changes depending on the set temperature and the ambient temperature. If the set temperature is too low or high, the remaining distance to full discharge shortens.
-
-
To turn off the system, press the climate control power switch.
Selecting the Airflow Mode
Convenient Ways to Use the Climate Control System
Turning On the Climate Control System from A Remote Location (Remote Climate Control)
Using your Smartphone, you can turn on the climate control system remotely before departing. You can check the cabin temperature and the setting status using your Smartphone while the remote climate control is operating.
To operate the remote climate control, switch the power switch OFF.
Please refer to local Mazda website for more Connected Service information.
-
To use the remote climate control, it is necessary to subscribe to Connected Service.
-
The remote climate control can be used when your Smartphone is connected to your vehicle using the Connected Service.
-
The remote climate control may not be available depending on the model of the Smartphone you are using. Please check in advance.
