Climate Control System
Touch Panel Basic Operation
Do not press the screen strongly or press it with a sharp-pointed object. Otherwise, the screen could be damaged.
Touch panel operation
You can do three types of icon operations on the touch panel using your finger including, touch, touch and hold, and swipe operations.
Switching between auto and manual operation screens
Touch the seat indication in the center of the screen to switch from the auto operation screen to the manual operation screen. Press the AUTO switch to switch from the manual operation screen to the auto operation screen.
Temperature Control Switch/Icon
The temperature setting can be adjusted between 18 °C (64 °F) and 32 °C (90 °F) by pressing the temperature setting switch, or touching the 
(red) or 
(blue).
The temperature setting can be quickly adjusted by pressing and holding the temperature setting switch, or touching and holding the (red) or (blue).
-
When you set the temperature to the lower or upper limit, “LO” or “HI” is displayed.
-
The temperature units for the temperature setting display can be changed in conjunction with the temperature units for the outside temperature display.
-
When swiping the
(red) or (blue) up/down, the temperature can be adjusted up or down in increments of 3 °C (6 °F). -
To reduce power consumption by the climate control system, warm airflow may not be supplied when the ambient temperature is 25 °C (77 °F) or more.
Climate Control Power Switch (System On/Off)
The climate control system turns on and off each time the climate control power switch is pressed.
A/C Icon
Touch the A/C while the AUTO switch is turned on will turn off the air conditioner (cooling, defrosting functions).
The on/off of the air conditioner switches each time the A/C is touched.
While the air conditioner is operating, the indicator light next to the A/C turns on.
-
The air conditioner operates when the A/C is touched while the air conditioner is turned off.
-
The air conditioner may not function when the outside temperature approaches 0 °C (32 °F).
Air Intake Selector Icon
Outside or recirculated air positions can be selected. Touch the 
to select outside/recirculated air positions.
Do not recirculate the air in the cabin during cold or rainy weather:
Recirculating the air in the cabin during cold and rainy weather is dangerous as it will cause the windows to fog up. Your vision will be hampered, which could lead to a serious accident.
Recirculated air position (Indicator light next to the turns on)
Outside air is shut off. Use this position when going through tunnels, driving in congested traffic (high engine exhaust areas) or when quick cooling is desired.
Outside air position (Indicator light next to the turns off)
Outside air is allowed to enter the cabin. Use this mode for ventilation or windshield defrosting.
Convenient Ways to Use the Climate Control System
Cautions Concerning Cabin Preconditioning
Cabin preconditioning is a collective term regarding use of the Climate Control Timer and the remote climate control.
You can cool or warm the cabin, or defog the window glass before getting in the vehicle by setting your departure time in advance (Climate Control Timer) or by a remote operation (remote climate control) using your Smartphone.
Do not operate the cabin preconditioning with people or pets in the vehicle:
The cabin preconditioning may stop automatically due to the vehicle conditions and the surrounding environment. If the climate control system stops and the temperature inside the vehicle increases or decreases, it could cause a serious medical condition such as heat exhaustion and dehydration or even death.
-
If any of the following conditions are met, the cabin preconditioning will not operate. In addition, if the cabin preconditioning is operating, it will stop. However, if the liftgate is opened while the cabin preconditioning is operating, the cabin preconditioning will not stop.
-
The high voltage battery or the lead-acid battery charge is low
-
The doors/liftgate are open
-
The power switch is switched to a position other than OFF
-
There is a problem with the vehicle
-
-
If the operation conditions are not met 30 minutes before the departure time set by the climate control timer, the climate control timer will not operate.
-
If any of the following conditions is met, the climate control system will not operate effectively and the cabin temperature may not reach the set temperature:
-
Your power consumption is high
-
Extremely high or low temperatures
-
-
The climate control system stops at the departure time. The cabin temperature may not reach the set temperature if you get in the vehicle earlier or later than the set departure time.
-
If you operate the cabin preconditioning while charging the vehicle, it could take more time to charge the high voltage battery.
-
During the cabin preconditioning operation, the cooling fan, the compressor, and the cabin fans operate, but this does not indicate a problem.
-
The climate control system functions you can use differ depending on the power switch position.
Function
Power switch position
OFF
ACC
ON (EV system off)
ON (EV system on)
Air circulation
—
—
X
X
Cooling/heating
—
—
X*1
X
Climate Control Timer
X
—
—
—
Remote climate control
X
—
—
—
X: Available
—: Not available
-
The cooling/heating function can be used only while charging.
-
-
The recommended set temperature is 25 °C (77 °F). If you set an extremely high or low temperature, power consumption will increase and the charging time will take longer.
-
If you operate the cabin preconditioning while the charging connector is connected, you can reduce the electric power consumption of the high voltage battery. Cabin preconditioning can be operated even without connecting the charging connector, however, the electrical power of the high voltage battery will decrease.
-
If quick charge is started during cabin preconditioning, the cabin preconditioning is stopped.
-
While the cabin preconditioning is operating, the indicator light for the climate control power switch turns on.
-
The cabin preconditioning operates for 30 minutes. If you set the departure time using the Climate Control Timer, set it 30 minutes or later from the current time and if you want to make several settings, space them out at intervals of 30 minutes or longer.
-
Enabling the defroster setting will aid you in defrosting and removing ice or snow from the window glass. The defroster performance changes according to the set temperature.
-
The Climate Control Timer does not work immediately after the lead-acid battery is removed or installed, or when no GPS signal has been received. When GPS signals are received, the Climate Control Timer becomes operational.
