Warning/Indicator Light Turns On
Master Warning Light
The light turns on if the system has a problem.
Check the contents of the message displayed on the center display or in the instrument cluster and take the necessary action.
Electric Vacuum Pump Warning Light (Amber)
The light turns on if the system has a problem.
Have your vehicle inspected by an Authorized Mazda Dealer.
Security Indicator Light
If the security indicator light turns on/flashes while driving, do not stop the engine (leave it operating) and have the vehicle inspected at an Authorized Mazda Dealer. If you stop the engine , you may not be able to start it again.
If the engine cannot be started, switch the vehicle power OFF, place the key in another position within the operation range, and then restart the engine.
Check the security indicator light and if it does not turn off, such as it remains on or flashes, switch the vehicle power OFF, wait for a while, and then restart the engine.
If the engine does not start after three attempts, a system malfunction may have occurred. Have the vehicle inspected by an Authorized Mazda Dealer.
When repairing the immobilizer system, the key codes will need to be reprogrammed. Bring all the remaining keys to an Authorized Mazda Dealer.
Low Washer Fluid Amount Warning Light (Some Models)
The light turns on if the amount of washer fluid is low when the vehicle power is switched ON.
Add washer fluid.
KEY Indicator Light (Green) (Flashing)
The light flashes if the battery power of the key is low when the vehicle power is switched from ON to OFF.
Replace the key battery.
