 ABS Warning Light
|
If the ABS warning light stays on while you're driving, the ABS control unit has detected a system malfunction. If this occurs, your brakes will function normally as if the vehicle had no ABS.
Should this happen, consult an Authorized Mazda Dealer as soon as possible.
-
When the engine is jump-started to charge the battery, uneven rpm occurs and the ABS warning light may illuminate. If this occurs, it is the result of the weak battery and does not indicate an ABS malfunction.
Recharge the battery.
-
The brake assist system does not operate while the ABS warning light is illuminated.
|
 Master Warning Indication/Warning Light
|
With Multi-information Display (Type A/Type B)
Displays when notification of the system malfunctions is required.
Check the message indicated in the display and consult an Authorized Mazda Dealer.  Indication in display and master warning light in instrument cluster are illuminated at same time.
This indicates a malfunction with the vehicle system. Check the message indicated in the display and consult an Authorized Mazda Dealer.
For details, refer to the explanations for the warning/indicator lights, in the warning/indicator lights section, which match the symbol in the upper part of the display.
If a message is not indicated in the display, operate the INFO switch to display the “Warning” screen.
Refer to Message Indicated in Multi-information Display (Type A) (Search).
Refer to Message Indicated in Multi-information Display (Type B) (Search).
With Multi-information Display (Type C)
The light illuminates continuously if any one of the following occurs. Consult an Authorized Mazda Dealer.
|
 Electric Parking Brake (EPB) Warning Indication/Warning Light
|
The warning light illuminates when the system has a malfunction. Have your vehicle inspected at an Authorized Mazda Dealer.
|
 Check Engine Light
|
If this light illuminates while driving, the vehicle may have a problem. It is important to note the driving conditions when the light illuminated and consult an Authorized Mazda Dealer.
The check engine light may illuminate in the following cases:
-
The engine's electrical system has a problem.
-
The emission control system has a problem.
-
The fuel tank level being very low or approaching empty.
-
The fuel-filler cap is missing or not tightened securely.
If the check engine light remains on, or it flashes continuously , do not drive at high speeds and consult an Authorized Mazda Dealer as soon as possible.
If the check engine light turns on, do not disconnect the battery cables.
If the battery cables are disconnected and then reconnected, the engine could be damaged and catch on fire.
|
 Automatic Transaxle Warning Indication/Warning Light
|
The indication/light illuminates when the transaxle has a problem.
If the automatic transaxle warning indication/light illuminates, the transaxle has an electrical problem. Continuing to drive your Mazda in this condition could cause damage to your transaxle. Consult an Authorized Mazda Dealer as soon as possible.
|
 AWD Warning Indication (Some Models)
|
“4WD system malfunction” is displayed
The indication is displayed under the following conditions. The system may have a malfunction. Have the vehicle checked at an Authorized Mazda Dealer.
“4WD system high-load” is displayed
The indication is displayed under the following conditions. Park the vehicle in a safe place and check that the warning indication light turns off, and then drive the vehicle. Contact an Authorized Mazda Dealer if the indication is continuously displayed.
-
When the differential oil temperature is excessively high.
-
When there is a large difference between the front and rear wheel rotation, such as when trying to remove the vehicle from mud.
|
 (Turns on)
TCS/DSC Indicator Light
|
If the light stays on, the TCS, DSC or the brake assist system may have a malfunction and they may not operate correctly. Take your vehicle to an Authorized Mazda Dealer.
|
 Air Bag/Front Seat Belt Pretensioner System Warning Light
|
A system malfunction is indicated if the warning light constantly flashes, constantly illuminates or does not illuminate at all when the ignition is switched ON. If any of these occur, consult an Authorized Mazda Dealer as soon as possible. The system may not operate in an accident.
Never tamper with the air bag/pretensioner systems and always have an Authorized Mazda Dealer perform all servicing and repairs:
Self-servicing or tampering with the systems is dangerous. An air bag/pretensioner could accidentally activate or become disabled causing serious injury or death.
|
 (Flashing)
Tire Pressure Monitoring System Warning Light (Some Models)
|
If the tire pressure monitoring system has a malfunction, the tire pressure warning light flashes. Have your vehicle checked by an Authorized Mazda Dealer as soon as possible.
If the tire pressure monitoring system warning light illuminates or flashes, or the tire pressure warning beep sound is heard, decrease vehicle speed immediately and avoid sudden maneuvering and braking:
If the tire pressure monitoring system warning light illuminates or flashes, or the tire pressure warning beep sound is heard, it is dangerous to drive the vehicle at high speeds, or perform sudden maneuvering or braking. Vehicle drivability could worsen and result in an accident.
To determine if you have a slow leak or a flat, pull over to a safe position where you can check the visual condition of the tire and determine if you have enough air to proceed to a place where air may be added and the system monitored again by an Authorized Mazda Dealer or a tire repair station.
Do not ignore the TPMS Warning Light:
Ignoring the TPMS warning light is dangerous, even if you know why it is illuminated. Have the problem taken care of as soon as possible before it develops into a more serious situation that could lead to tire failure and a dangerous accident.
|
 (Amber)
KEY Warning Indication (Some Models)
|
“Keyless System Malfunction” is displayed
This message is displayed if the advanced keyless entry & push button start system has a problem.
Contact an Authorized Mazda Dealer.
If the message is indicated, or the push button start indicator light (amber) flashes, the engine may not start. If the engine cannot be started, try starting it using the emergency operation for starting the engine, and have the vehicle inspected at an Authorized Mazda Dealer as soon as possible.
Refer to Emergency Operation for Starting the Engine (Search).
“Ignition is On” is displayed
This message is displayed when the driver's door is opened without switching the ignition off.
“Key Not Detected” is displayed
This message is displayed when any of the following operations is performed with the key out of the operational range or placed in areas inside the cabin where it is difficult for the key to be detected.
-
The push button start is pressed with the ignition switched off
-
The ignition is switched on
-
All doors are closed without switching the ignition off
|
 (Red)
(Turns on)
KEY Warning Light (Some Models)
|
If any malfunction occurs in the keyless entry system, it illuminates continuously.
If the key warning indicator light illuminates or the push button start indicator light (amber) flashes, the engine may not start. If the engine cannot be started, try starting it using the emergency operation for starting the engine, and have the vehicle inspected at an Authorized Mazda Dealer as soon as possible.
Refer to Emergency Operation for Starting the Engine (Search).
|
 (Amber)
High Beam Control System (HBC) Warning Indication/Warning Light (Some Models)
|
The light remains turned on if there is a problem with the system. Have your vehicle inspected at an Authorized Mazda Dealer.
If the Forward Sensing Camera (FSC) field of view is impaired during bad weather conditions (such as rain, fog, and snow) and when the windshield is dirty, the warning indication/warning light for the High Beam Control System (HBC) may display/turn on. However, this does not indicate a problem.
|
 Blind Spot Monitoring (BSM) Warning Indication (Some Models)
|
The Warning indication turns on if there is any malfunction in the Blind Spot Monitoring (BSM). Have your vehicle inspected by an Authorized Mazda Dealer.
If the vehicle is driven on a road with less traffic and few vehicles that the radar sensors can detect, the system may pause. However, it does not indicate a malfunction.
|
 Blind Spot Monitoring (BSM) OFF Indicator Light (Some Models)
|
A problem in the system may be indicated under the following conditions.
Have your vehicle inspected at an Authorized Mazda Dealer.
-
The light does not turn on when the ignition is switched ON.
-
The light remains on even when the Blind Spot Monitoring (BSM) system can be operated.
-
It turns on while driving the vehicle.
If the vehicle is driven on a road with less traffic and few vehicles that the radar sensors can detect, the system may pause (The Blind Spot Monitoring (BSM) OFF indicator light in the instrument cluster illuminates). However, it does not indicate a malfunction.
|
 (Amber)
Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) Warning Indication (Some Models)
|
The message is displayed when the system has a malfunction. Have your vehicle inspected at an Authorized Mazda Dealer.
|
 Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) Warning Indication (Some Models)
|
The message is displayed when the system has a malfunction. Have your vehicle inspected at an Authorized Mazda Dealer.
The system does not operate when the warning message is displayed.
-
Always use tires for all wheels that are of the specified size, and the same manufacture, brand, and tread pattern. In addition, do not use tires with significantly different wear patterns on the same vehicle. If such improper tires are used, the system may not operate normally.
-
When an emergency spare tire is used, the system may not operate normally.
|
 LED Headlight Warning Light
|
This light illuminates if there is a malfunction in the LED headlight. Have your vehicle inspected by an Authorized Mazda Dealer.
|
|
|
