Warning/Indicator Lights and Warning Sounds
If a Warning Light Turns On or Flashes
If any warning light turns on/flashes, take appropriate action for each light. There is no problem if the light turns off, however if the light does not turn off or turns on/flashes again, consult an Authorized Mazda Dealer.
If the warning light/indicator light turns on or flashes, park the vehicle in a safe place immediately and take appropriate measures.
Continuing to drive the vehicle while ignoring the illumination/flashing of the warning light/indicator light is dangerous because a problem may occur to a vehicle system, or it could lead to an accident.
The details for some warnings can be viewed on the center display or multi-information display in the instrument cluster.
Center display
-
Select “Information” on the home screen.
-
Select “Vehicle Status Monitor”.
-
Select the applicable warning to view the warning details.
Multi-information display
-
Press the INFO switch on the steering switch to display the warning indication screen.
Refer to Multi-information Display (Search).
Brake System Warning Indication/Warning Light
This warning has the following functions:
Warning light inspection
For an operation check, make sure that the light turns on when the power switch is switched on and turns off a few seconds later, or when the EV system is started.
When the light turns on
If the brake system warning light remains illuminated the brake fluid may be low or there could be a problem with the brake system. Park the vehicle in a safe place immediately and contact an Authorized Mazda Dealer.
Refer to Inspecting Brake Fluid Level (Search).
Do not drive with the brake system warning light illuminated. Contact an Authorized Mazda Dealer to have the brakes inspected as soon as possible:
Driving with the brake system warning light illuminated is dangerous. It indicates that your brakes may not work at all or that they could completely fail at any time. If this light remains illuminated, after checking that the parking brake is fully released, have the brakes inspected immediately.
-
In addition, the effectiveness of the braking may diminish so you may need to depress the brake pedal more strongly than normal to stop the vehicle.
-
When starting the EV system, the brake system warning light may turn on and the warning indication may be displayed. In this case, park the vehicle in a safe location and release the brake pedal.
If the brake system warning light/warning indication does not turn off even after parking the vehicle, have the vehicle inspected by an Authorized Mazda Dealer.
Electronic Brake Force Distribution System Warning
If the electronic brake force distribution control unit determines that some components are operating incorrectly, the control unit may illuminate the brake system warning light and the ABS warning light simultaneously. The problem is likely to be the electronic brake force distribution system.
Do not drive with both the brake system warning light and ABS warning light illuminated. Have the vehicle towed to an Authorized Mazda Dealer to have the brakes inspected as soon as possible:
Driving when the brake system warning light and ABS warning light are illuminated simultaneously is dangerous.
When both lights are illuminated, the rear wheels could lock more quickly in an emergency stop than under normal circumstances.
Remaining High Voltage Battery Power Warning Indication/Warning Light
“High Voltage Battery Is Low. Charge Battery Soon” displays/turns on
The indication displays when the remaining high voltage battery power is low.
“High Voltage Battery Is Urgently Low Charge Battery Immediately” displays/flashing
The indication displays when the remaining high voltage battery power is 0.
“High Voltage Battery Is Depleted Vehicle Cannot Be Driven Until Battery Is Charged” displays/flashing
The indication/light displays/flashes when the remaining high voltage battery power is 0 and the vehicle cannot be driven.
Charging System Warning Indication/Warning Light
The indication/light displays/turns on if the charging system has a problem.
Have your vehicle inspected by an Authorized Mazda Dealer as soon as possible. Otherwise, the charging system may not charge the battery.
Output Restriction Warning Indication/Warning Light
“Acceleration Limited” displays/turns on
The indication/light displays/turns on under the following conditions. The vehicle speed may not increase even if the accelerator pedal is depressed because the motor output is restricted.
-
EV system is protected from overheating
-
High voltage battery level is low
-
High voltage battery temperature is low
“Acceleration Limited” displays/flashing
If the vehicle continues to be driven with the output restriction warning indication/warning light turned on, the output restriction warning light flashes.
The vehicle speed may not increase even if the accelerator pedal is depressed because the motor output is further restricted compared to the condition in which the output restriction warning light turns on.
“Excessive EV System Temp. Acceleration Limited Avoid Moving at Very Low Speeds. Depress Brake When Not Moving” or “Vehicle Cannot Hold Position. Depress Brake Pedal to Avoid Rolling” displays/turns on
When the vehicle is stopped on an upslope or the vehicle is driven at low speed on an upslope with the selector lever in the D or R position, the indication/light may display/turn on.
If necessary, park the vehicle in a safe place and let the EV system cool down because the output is restricted until the EV system returns to the normal temperature.
When the output restriction warning indication/warning light displays/turns on or flashes, check the safety of the surroundings:
The motor output decreases and the vehicle speed decreases resulting in an accident. If the vehicle cannot be driven safety, stop the vehicle in a safe place.
Power Steering Malfunction Indication/Indicator Light
The electric power steering malfunction indication/indicator light displays/turns on if the electric power steering has a malfunction.
If the electric power steering malfunction indication/indicator light displays/turns on, stop the vehicle in a safe place and switch the power switch OFF.
There is no problem if the display/illumination of the electric power steering malfunction indication/indicator light turns off when the EV system is restarted after some time has passed. If the electric power steering malfunction indication/indicator light displays/turns on even after the EV system is restarted, contact an Authorized Mazda Dealer.
-
If the message is displayed, the power steering will not operate normally. In this case, the steering wheel can still be operated, however, the operation may feel heavy compared to normal, or the steering wheel could vibrate when turning.
-
Repeatedly jerking the steering wheel left and right while the vehicle is stopped or moving extremely slowly will cause the power steering system to go into protective mode which will make the steering feel heavy, but this does not indicate a problem. If this occurs, park the vehicle safely and wait several minutes for the system to return to normal.
Brake Control System Warning Indication/Warning Light
The warning light illuminates when the system has a malfunction. Have your vehicle inspected at an Authorized Mazda Dealer.
Electric Parking Brake (EPB) Indication/Indicator Light
This warning has the following functions:
Parking brake warning/Indicator light inspection
If the electric parking brake (EPB) indicator light remains on even with the parking brake released, the system may have a malfunction. Have the vehicle inspected by an Authorized Mazda Dealer.
When the light is flashing
The light flashes if the Electric Parking Brake (EPB) has a malfunction. If the light remains flashing even if the Electric Parking Brake (EPB) switch is operated, consult an Authorized Mazda Dealer as soon as possible.
Security Indicator Light
If the security indicator light turns on/flashes while driving, do not stop the EV system (leave it operating) and have the vehicle inspected at an Authorized Mazda Dealer. If the EV system is stopped, it may not be restarted.
If the EV system cannot be started, switch the power switch OFF, place the key in another position within the operation range, and then restart the EV system.
Check the security indicator light and if it does not turn off, such as it remains on or flashes, switch the power switch OFF, wait for a while, and then restart the system.
If the EV system does not start after three attempts, a system malfunction may have occurred. Have the vehicle inspected by an Authorized Mazda Dealer.
Because the electronic codes are reset when the immobilizer system is repaired, the keys are needed. Make sure to bring all the keys to an Authorized Mazda Dealer so that they can be programmed.
Seat Belt Warning Indication/Warning Light (Front seat)
The seat belt warning light turns on if the driver or front passenger's seat is occupied and the seat belt is not fastened with the power switch switched ON.
If the driver or front passenger's seat belt is unfastened (only when the front passenger's seat is occupied) and if the vehicle is driven at about 20 km/h (12 mph) or faster, or about 10 km/h (6 mph) or faster for a continuous 30 seconds, with the seat belt unfastened, the warning light flashes for a certain period. After a short time, the warning light stops flashing, but remains illuminated.
-
The warning light flashes for about 6 seconds if the driver or front passenger's seat is not fastened when the power switch is switched ON.
-
Placing heavy items on the front passenger's seat may cause the front passenger's seat belt warning function to operate depending on the weight of the item.
-
To allow the front passenger occupant classification sensor to function properly, do not place and sit on an additional seat cushion on the front passenger's seat. The sensor may not function properly because the additional seat cushion could cause sensor interference.
-
If a small child is seated on the front passenger's seat, the warning light may not operate.
Action to be taken
Fasten the seat belts.
Door-Ajar/Liftgate-Ajar Warning Indication/Warning Light
The light turns on if any door/liftgate is not closed securely.
Action to be taken
Close the door/liftgate securely.
Tire Pressure Monitoring System (TPMS) Warning Indication/Warning Light (Turns on)
If a tire pressure decreases below the specified air pressure, the TPMS warning light turns on.
At the same time, a message and the tire pressure of each tire are displayed on the multi-information display alternately. In addition, the tire (s) with low air pressure is displayed in yellow.
Do not drive the vehicle at high speeds if the TPMS warning light turns on or flashes:
Driving the vehicle at high speeds while the TPMS warning light is turned on or flashing is dangerous because the brake performance and the steering wheel operability will be reduced. If the vehicle is driven at high speeds or the brakes are suddenly applied, it could lead to an accident. Gradually apply the brakes to lower the vehicle's speed.
Do not ignore the TPMS warning light when it is turned on or flashing:
Continuing to drive the vehicle while ignoring the illumination/flashing of the TPMS warning light is dangerous because a tire may burst which could lead to an accident. Take appropriate measures as soon as possible.
While the TPMS is learning the tire positions, such as immediately after a tire position has been changed, the tire pressure at the tire position prior to it being changed is displayed until the system completes the learning. For this reason, the tire pressures displayed for the tire positions may be different from the actual tire pressures at the tire positions.
Action to be taken
Adjust the tire pressures to the appropriate pressures.
Refer to Tire Inflation Pressure (Search).
-
Adjust the tire pressures while the tires are cool. Because the air pressure in the tires fluctuates depending on the temperature, before adjusting the tire pressures, let the vehicle sit for an hour or drive it only within a 1.6 km (1 mile) distance. If the tire pressures are adjusted while the tires are warm, the tire pressures may decrease below the specified air pressure after cooling down which could turn on the warning light. In addition, because the air pressure in the tires decreases when the ambient temperature is low, if the ambient temperature increases, an illuminated TPMS warning light may turn off. Under any circumstances, always adjust the tire pressures while the tires are cool.
-
After adjusting the tire pressures, the TPMS warning light turns off. If the TPMS warning light does not turn off, drive the vehicle at a speed of about 25 km (16 mph) or faster for 3 minutes or longer and make sure the warning light turns off.
If the TPMS warning light remains on even after adjusting the tire pressures, one of the tires may have a puncture.
Warning Sound is Activated
Seat Belt Warning Beep
Front seat
If the driver's seat belt is not fastened when the power switch is switched ON, a beep sound will be heard for about 6 seconds. If the driver or the front passenger's seat belt is not fastened and if the vehicle is driven at about 20 km/h (12 mph) or faster, or about 10 km/h (6 mph) or faster for a continuous 30 seconds, with the seat belt unfastened, a sound is activated continuously for a certain period.
Until a seat belt is fastened or a given period of time has elapsed, the beep sound will not stop even if the vehicle speed falls below 20 km/h (12 mph).
-
To allow the front passenger occupant classification sensor to function properly, do not place and sit on an additional seat cushion on the front passenger's seat. The sensor may not function properly because the additional seat cushion could cause sensor interference.
-
If a small child is seated on the front passenger's seat, the warning beep may not operate.
Rear seat
The warning beep only sounds if a seat belt is unfastened after being fastened.
Power Switch Not Switched OFF (STOP) Warning Beep
If the driver's door is opened with the power switch switched to ACC, a beep will be heard continuously in the cabin to notify the driver that the power switch has not been switched OFF (STOP). Under this condition, the keyless entry system will not operate, the vehicle cannot be locked, and the lead-acid battery voltage will be depleted.
Key Removed from Vehicle Warning Beep
Vehicles with advanced keyless function
If the key is taken out of the vehicle while the power switch is switched to ACC or ON, and all the doors are closed, a sound is activated 6 times outside of the vehicle and a sound is activated 1 time in the vehicle.
Vehicles without advanced keyless function
If the key is taken out of the vehicle while the power switch is switched to ACC or ON, and all the doors are closed, a sound is activated 1 time in the vehicle.
Make sure that you leave the vehicle while carrying the key, or switch the power switch OFF.
Touch Sensor Inoperable Warning Beep (With the advanced keyless function)
A warning beep is activated to notify the driver that the doors are not locked when all of the following conditions are met:
-
The power switch is switched OFF.
-
All the doors and liftgate are not fully closed.
-
The lock is operated 3 times within 5 seconds.
Check the power switch and whether the doors and liftgate are open or closed, and then operate the lock again.
Brake Override Warning Beep
A warning beep is activated when the accelerator pedal and brake pedal are depressed at the same time while driving. Only depress the brake pedal.
AUTOHOLD Warning Beep
Message is displayed and beep sound is activated simultaneously for about 5 seconds when using AUTOHOLD function or when AUTOHOLD switch is operated.
Because a problem with AUTOHOLD function has occurred, AUTOHOLD function does not operate even if AUTOHOLD switch is operated.
If the message is displayed and the beep sound is activated simultaneously, have your vehicle inspected at an Authorized Mazda Dealer.
Vehicle Problem Warning Beep
If any of the following problems occur, a warning beep is activated. Check the information regarding the warning indication in the instrument cluster or on the center display.
-
Brake system problem
-
Electric Parking Brake (EPB) problem
-
Shift control system problem
-
EV system problem
-
Charging system problem
-
Approaching vehicle audible system problem
Reverse Position Warning Beep
The warning beep is activated when the power switch is switched ON and the selector lever is in the R position.
Blind Spot Monitoring (BSM) System Warning Beep (Some Models)
The Blind Spot Monitoring (BSM) warning beep operates when the turn signal lever is operated to the side where the Blind Spot Monitoring (BSM) warning light is illuminated.
Rear Cross Traffic Alert (RCTA) Warning Beep (Some Models)
The Rear Cross Traffic Alert (RCTA) warning beep is activated if there is a possibility of collision with a vehicle approaching from the rear on the left and right sides of the vehicle.
Lane/Road Departure Warning Beep (Some Models)
The warning beep is activated when the system determines that the vehicle may depart from the lane or the road.
Check whether the vehicle has not deviated from the driving lane/road.
Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) System Warnings (Some Models)
The Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) system warnings notify the driver of system malfunctions and cautions on use when required.
Check based on the beep sound.
|
Warning beep type |
Notification content |
|---|---|
|
The beep sounds 1 time while the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) is operating. |
If a malfunction occurs in the system, make sure that the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) has been canceled. |
|
The beep sounds intermittently while the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) is operating. |
The distance between your vehicle and the vehicle ahead is too close. Check the safety of the surrounding area and reduce vehicle speed. |
Excessive Speed Warning (Some Models)
Door-ajar Warning Beep
A warning beep is activated if the vehicle is driven with any door or liftgate ajar. Drive the vehicle after closing the doors and liftgate.
