Instrument Cluster
Multi-information Display
The screen display informs you of the vehicle information.

The multi-information display indicates the following information.
-
Odometer
-
Trip meter
-
Engine coolant temperature gauge
-
Fuel gauge
-
Outside temperature
-
Maximum driving distance
-
Average fuel economy
-
Current fuel economy
-
i-ACTIVSENSE display
-
Door-ajar/trunk lid-open warning indication*1
-
Compass Display
-
Roof Operation Display (Hardtop)
-
Message display
-
Displayed when opening door/trunk lid.
Dashboard Illumination
(Without auto-light control)
When the lights are turned on with the vehicle power switched ON, the brightness of the dashboard illumination is dimmed.
(With auto-light control)
When the lights are turned on with the vehicle power switched ON, the brightness of the dashboard illumination is dimmed. However, when the light sensor detects that the surrounding area is bright such as when the lights are turned on in the daytime, the dashboard illumination does not dim.
(With auto-light control)
When the vehicle power is switched ON in the early evening or at dusk, the dashboard illumination is dimmed for several seconds until the light sensor detects the brightness of the surrounding area, however, the dimming may cancel after the brightness is detected.
Maximum Driving Distance Display
The maximum driving distance is calculated and displayed based on the current remaining fuel tank level and the fuel economy. When the maximum driving distance is 50 km (30 miles) or farther, the maximum driving distance indication decreases in 10 km (10 mile) increments, and when the maximum driving distance is shorter than 50 km (30 miles), it decreases in 1 km (1 mile) increments.

The maximum driving distance is just an approximate numerical value and differs from the actual driving distance. Drive the vehicle while checking the fuel gauge.
i-ACTIVSENSE Display
Displays the system status.

Compass Display
The direction the vehicle is moving is displayed in one of eight directions while the vehicle is being driven.

Message Display
Displays a message to notify the user of the system operation status and malfunctions or abnormalities.
Follow the instructions indicated on the display.
Refer to How to Use the Multi-information Display (Search).