Doors and Locks

Holding the key in the unlocked position in the driver's door lock for about a second unlocks all doors and the liftgate . To unlock only the driver's door, insert the key into the driver's door lock and turn the key briefly to the unlock position and then immediately return it to the center position.

• The system can be set to unlock all doors by performing a single operation.

  Refer to Personalization Features (Search).

  Use the following procedure to change the setting.

  1. Switch the ignition off and close all of the doors and the liftgate.

  2. Open the driver's door.

  3. Within 30 seconds of opening the driver's door, press and hold the UNLOCK button on the key for 5 seconds or longer. The sound of the doors locking/unlocking can be heard.

     After this, the system switches the setting each time the UNLOCK button is pressed (the sound of the doors locking/unlocking can be heard).

  4. The setting change is completed by doing any one of the following:

     • Switch the ignition to ACC or ON.

     • Close the driver's door.

     • Open the liftgate.

     • The key is not operated for 10 seconds.

     • Press any button except the UNLOCK button on the key.

     • A request switch is pressed.

• Confirm that all doors and the liftgate are securely locked.

  For the liftgate, move it without pressing the electric liftgate opener to verify that the liftgate has not been left ajar.

• All doors and the liftgate cannot be locked when any door or the liftgate is open.

• It may require a few seconds for the doors to unlock after the request switch is pressed.

• A beep sound is heard for confirmation when the doors and the liftgate are locked/unlocked using the request switch. If you prefer, the beep sound can be turned off.

  The volume of the beep sound can also be changed.

  Refer to Personalization Features (Search).

  Use the following procedure to change the setting.

  1. Switch the ignition off and close all of the doors and the liftgate.

  2. Open the driver's door.

  3. Within 30 seconds of opening the driver's door, press and hold the LOCK button on the key for 5 seconds or longer.

     All of the doors and the liftgate lock and the beep sound activates at the currently set volume. (If the beep sound is currently set to not activate, it will not activate.) The setting changes each time the LOCK button on the key is pressed and the beep sound activates at the set volume. (If the beep sound has been set to not activate, it will not activate.)

  4. The setting change is completed by doing any one of the following:

     • Switch the ignition to ACC or ON.

     • Close the driver's door.

     • Open the liftgate.

     • The key is not operated for 10 seconds.

     • Press any button except the LOCK button on the key.

     • A request switch is pressed.

• (With theft-deterrent system)

  The hazard warning lights flash when the theft-deterrent system is armed or turned off.

  Refer to Theft-Deterrent System (Search).

• The setting can be changed so that the doors and the liftgate are locked automatically without pressing the request switch.

  Refer to Personalization Features (Search).

  (Auto-lock function)

  A beep sound is heard when all doors and the liftgate are closed while the advanced key is being carried. All doors and the liftgate are locked automatically after about three seconds when the advanced key is out of the operational range. Also, the hazard warning lights flash once. (Even if the driver is in the operational range, all doors and the liftgate are locked automatically after about 30 seconds.) If you are out of the operational range before the doors and the liftgate are completely closed or another key is left in the vehicle, the auto-lock function will not work. Always make sure that all doors and the liftgate are closed and locked before leaving the vehicle. The auto-lock function does not close the power windows.

• (Auto re-lock function)

  After unlocking with the request switch, all doors and the liftgate will automatically lock if any of the following operations are not performed within about 60 seconds. If your vehicle has a theft-deterrent system, the hazard warning lights will flash for confirmation.

  The time required for the doors to lock automatically can be changed.

  Refer to Personalization Features (Search).

  • A door or the liftgate is opened.

  • The ignition is switched to any position other than off.

When locking the doors this way, be careful not to leave the key inside the vehicle.

• Function number 3 is the factory setting for your vehicle.

• There are only a total of six auto lock/unlock settings available for automatic transaxle vehicles, and three for manual transaxle vehicles . Be sure to press the unlock side of the driver's door-lock switch the correct number of times according to the selected function number. If the switch is mistakenly pressed seven times on an automatic transaxle vehicle or four times on a manual transaxle , the procedure will be invalidated. If this occurs, start the procedure from the beginning.

• The doors cannot be locked or unlocked while the setting function is being performed.

• The procedure can be cancelled by pressing the lock side of the driver's door-lock switch.

The red indication can be seen when the door-lock knob is unlocked.

When locking the door this way, be careful not to leave the key inside the vehicle.