Instrument Cluster and Display
Tachometer
The tachometer shows engine speed in thousands of revolutions per minute (rpm).
Do not run the engine with the tachometer needle in the RED ZONE.
This may cause severe engine damage.

When the tachometer needle enters the STRIPED ZONE, this indicates to the driver that the gears should be shifted before entering the RED ZONE.
Multi-information Display (Type A)

The multi-information display indicates the following information.
-
Speedometer
-
Odometer
-
Trip meter
-
Outside temperature
-
Distance-to-empty
-
Average fuel economy
-
Current fuel economy
-
Maintenance Monitor
-
Blind Spot Monitoring (BSM) Display
-
Distance Recognition Support System (DRSS) Display
-
Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) System Display
-
Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) Display
-
Cruise Control Display
-
Compass Display
-
Door-Ajar/Liftgate-Ajar Warning Indication
-
Warning message
The screen content changes each time the INFO switch is pressed.

The screen content changes each time the selector knob is pressed and held.

Blind Spot Monitoring (BSM) Display
Distance Recognition Support System (DRSS) Display (Some Models)
Displays the distance between your vehicle and the vehicle ahead.

Refer to Distance Recognition Support System (DRSS) (Search).
Speedometer
The speedometer indicates the speed of the vehicle.
Multi-information Display (Type B)

The multi-information display indicates the following information.
-
Odometer
-
Trip meter
-
Engine coolant temperature gauge
-
Fuel gauge
-
Outside temperature
-
Distance-to-empty
-
Average fuel economy
-
Current fuel economy
-
Maintenance Monitor
-
Blind Spot Monitoring (BSM) Display
-
Distance Recognition Support System (DRSS) Display
-
Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) System Display
-
Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) Display
-
Cruise Control Display
-
Compass Display
-
Warning message
The screen content changes each time the INFO switch is pressed.

Engine Coolant Temperature Gauge
Displays the engine coolant temperature. The blue gauge indicates that the engine coolant temperature is low, and the red gauge indicates that the engine coolant temperature is high and overheating.

If the high engine coolant temperature warning light (red) flashes, there is a possibility of overheating. Drive slowly to reduce engine load until you can find a safe place to stop the vehicle and wait for the engine to cool down.
Refer to Overheating (Search).
-
If the engine coolant temperature is high or the engine is hot, the engine output may be limited.
-
The temperature unit (Centigrade/Fahrenheit) of the engine coolant gauge display changes in conjunction with the temperature unit of the outside temperature display.
Refer to Personalization Features (Search).
-
During normal driving, the engine coolant temperature stabilizes at 100 °C (210 °F) or less, and the gauge indicates a range lower than 100 °C (210 °F).
Current Fuel Economy
This displays the current fuel economy by calculating the amount of fuel consumption and the distance traveled.

Indicates the 0 position when the vehicle speed is about 5 km/h (3 mph) or slower.
Blind Spot Monitoring (BSM) Display
Warning (Display Indication)
A message is displayed to notify the user of the system operation status and malfunctions or abnormalities.
If the warning light turns on/flashes simultaneously or a symbol is indicated in the display, check the information regarding the warning light or symbol.
Refer to If a Warning Light Turns On or Flashes (Search).
For messages not indicating a symbol, follow the instructions indicated in the multi-information display.
Refer to Message Indicated in Multi-information Display (Search).
Warning Indication/Warning Lights
These lights turn on or flash to notify the user of the system operation status or a system malfunction.
Signal |
Warning |
Page |
---|---|---|
![]() |
Brake System Warning Indication/Warning Light*1*2 |
(Search) |
![]() |
ABS Warning Light*1 |
Electronic Brake Force Distribution System Warning (Search) |
ABS warning (Search) |
||
![]() |
Charging System Warning Indication/Warning Light*1 |
(Search) |
![]() |
Engine Oil Warning Light*1 |
(Search) |
![]() (Red) |
High Engine Coolant Temperature Warning Light*1 |
(Search) |
![]() |
Power Steering Malfunction Indication |
(Search) |
![]() |
Master Warning Indication |
(Search) |
![]() |
Electric Parking Brake (EPB) Warning Indication/Warning Light*1 |
(Search) |
![]() |
Check Engine Light*1 |
(Search) |
![]() |
Automatic Transaxle Warning Indication |
(Search) |
![]() |
AWD Warning Indication (Some Models) |
(Search) |
![]() |
Air Bag/Front Seat Belt Pretensioner System Warning Light*1 |
(Search) |
![]() |
Tire Pressure Monitoring System Warning Light*1 (Some Models) |
Flashing (Search) |
Turns on (Search) |
||
![]() (Amber/White) |
KEY Warning Indication |
Amber (Search) |
White (Search) |
||
![]() (Amber) |
High Beam Control System (HBC) Warning Indication/Warning Light*1 (Some Models) |
(Search) |
![]() |
Blind Spot Monitoring (BSM) Warning Indication (Some Models) |
(Search) |
![]() (Amber) |
Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) Warning Indication (Some Models) |
(Search) |
![]() |
Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) Warning Indication (Some Models) |
(Search) |
![]() |
LED Headlight Warning Light*1 |
(Search) |
![]() (Amber) |
Smart Brake Support/Smart City Brake Support (SBS/SCBS) Warning Indication (Some Models) |
(Search) |
![]() |
Low Fuel Warning Indication |
(Search) |
![]() |
Check Fuel Cap Warning Indication/Warning Light*1 |
(Search) |
![]() |
Engine Oil Level Warning Light*1 |
(Search) |
![]() |
Seat Belt Warning Light (Front seat) |
(Search) |
![]() |
Seat Belt Warning Light (Rear seat) (Some Models) |
(Search) |
![]() |
Low Washer Fluid Level Warning Indication (Some Models) |
(Search) |
![]() |
Door-Ajar Warning Indication |
(Search) |
![]() |
Liftgate-Ajar Warning Indication |
(Search) |
-
The light turns on when the ignition is switched on for an operation check, and turns off a few seconds later or when the engine is started. If the light does not turn on or remains turned on, have the vehicle inspected at an Authorized Mazda Dealer.
-
The light turns on continuously when the parking brake is applied.