Audio Set

Operating the Radio

Radio ON

Select the icon on the home screen to display the Entertainment screen. When selecting the desired radio, the following icons are indicated in the lower part of the center display.

AM/FM Radio

Icon

Function

Displays the Entertainment menu. Use to switch to a different audio source.

Displays the station list.

Select to display the frequencies of up to ten radio stations on the auto memory preset list.

Select the desired frequency.

Displays the Favorites list. Long-press to store radio station currently being aired.

Switches the on and off. Displays the multi-cast channel list of the .

You can search for receivable radio stations.

Scanning stops at each station for about five seconds.

Select again to continue receiving the radio station.

You can change the radio frequency manually.

Rotate the commander knob, slide the screen, or touch the radio frequency.

Press or to change the radio frequency one step at a time.

When or is long-pressed, the radio frequency changes continually. It stops when you remove your hand from the icon or the commander knob.

Launches the iTunes Tagging function (for Apple devices with USB use only). Can be used when the is on.

Automatic radio station selection.

When long-pressed, the radio frequency changes continually. It stops when you remove your hand from the icon or the commander knob.

Displays sound settings to adjust audio quality level.

Refer to Volume/Display/Sound Controls (Search).

Favorites Radio

Selected stations can be registered for convenient operation. Up to 50 stations can be registered. The Favorites list is common to AM, FM, and satellite radio.

Registering to Favorites

Long-press the icon to register the current radio station. The registration can also be performed using the following procedure.

  1. Select the icon to display the Favorites list.

  2. Select .

  3. Select .

  4. The station is added to the bottom of the Favorites list.

     

    If the battery is disconnected, your Favorites list will not be deleted.

    Close Note
    View Note

Selecting radio station from Favorites

  1. Select the icon to display the Favorites list.

  2. Select the radio frequency to tune in the radio station.

Deleting from Favorites

  1. Select the icon to display the Favorites list.

  2. Select .

  3. Select .

  4. Select the radio frequency you want to delete.

  5. Select .

Changing Favorites list order

  1. Select the icon to display the Favorites list.

  2. Select .

  3. Select .

  4. Select a radio frequency. The selected radio station can be moved.

  5. Slide the radio station or move it using the commander switch, then select .

Operating the Satellite Radio (Some Models)

Displaying the Radio ID

When channel 0 is selected, the radio ID is displayed. Use the PREVIOUS or NEXT channel buttons to select channel 0.

SiriusXM® operation

Select the icon on the home screen to display the Entertainment screen. When is selected, the following icons are indicated in the bottom part of the center display.

Icon

Function

Displays the Entertainment menu. Use to switch to a different audio source.

Displays the channel list of the current category.

Displays the favorites list. Long-press to store the channel currently being aired.

Refer to Operating the Radio (Search).

Plays each channel in the current channel list for 6 seconds.

Select again to continue receiving the channel.

The function can be selected when the Tune Scan™ setting is turned off.

Each channel programmed to Smart Favorite is played for 6 seconds.

The function can be selected when all of the following conditions are met.

  • Two or more music channels have been programmed to Smart Favorite

  • The Tune Scan™ setting is ON

Displays in red while a station in a TuneMix™ channel is being broadcast.

The TuneMix™ broadcast ends when the icon is pressed.

(During TuneMix™ broadcast/Tune Scan™ operation)

Returns to the beginning of the previous song.

Plays a radio. When selected again, playback is temporarily stopped.

(During TuneMix™ broadcast/Tune Scan™ operation)

Advances to the beginning of the next song.

(When in a mode other than TuneMix™/Tune Scan™)

Plays the previous channel.

(When in a mode other than TuneMix™/Tune Scan™)

Plays the next channel.

Displays the setting screen.

Displays sound settings to adjust audio quality level.

Refer to Volume/Display/Sound Controls (Search).

Selection from channel list

Receivable channels can be displayed on the channel list screen. You can easily select the channel you want to listen from the list. Each category can be also displayed.

  1. Select the icon to display the channel list.

  2. Select a desired channel.

(Select from category list)

  1. Select the icon to display the channel list.

  2. Select to display the category list.

  3. Select a desired category.

Creating TuneMix™ Channel

The music channels programmed to Smart Favorite can be programmed to the TuneMix™ Channel.

 

  • Smart Favorite can be programmed by selecting on the SiriusXM Settings screen.

  • The TuneMix™ Channel cannot be created unless two or more SiriusXM music channels have been programmed to Smart Favorite.

Close Note
View Note

  1. Select the icon to display the channel list.

  2. Select the tab.

  3. Select .

  4. Select .

  5. Select the desired music channel to the TuneMix™ Channel.

  6. Select to register the TuneMix™ Channel.

How to use SiriusXM Travel Link®

SiriusXM Travel Link®

Properly equipped Mazda vehicles will also get the following SiriusXM infotainment services : Traffic, Weather, Sports Scores, Fuel Prices, and more. For a list of available features in your vehicle, visit SiriusXM.com/infotainment and get the most out of your driving experience.

Switching to SiriusXM Travel Link®

  1. Select on the home screen to display the Applications screen.

  2. Select .

  3. Select the item you want to display.

 

Some items cannot be selected while you are driving the vehicle.

Close Note
View Note

Item

Function

Traffic Plus*1

Displays continuously updated traffic information on the navigation screen in real time.

Weather Forecast

Displays the weather forecast.

Weather Radar*1

Displays items such as weather radar, severe storms, and hurricane/tropical storm information on the navigation screen.

Weather Alerts

Displays weather information, warnings, and security alerts.

Fuel Prices

Displays information for fuel stations near your vehicle's current position.

Sports

Displays a list of each genre list and the game schedules and match results for teams selected from the list.

  1. With Car navigation system

How to use AUX mode

How to use AUX mode

Playback

  1. Select the icon on the home screen to display the Entertainment screen.

  2. Select to switch to the AUX mode. The following icons are displayed in the lower part of the center display.

Icon

Function

Displays the Entertainment menu. Use to switch to a different audio source.

Displays sound settings to adjust audio quality level.

Refer to Volume/Display/Sound Controls (Search).

 

  • If a device is not connected to the auxiliary jack, the mode does not switch to the AUX mode.

  • Adjust the audio volume using the portable audio device, commander switch, or audio control switch.

  • Audio adjustments can also be made using the portable audio device's volume setting.

  • If the connection plug is pulled out from the auxiliary jack while in AUX mode, noise may occur.

Close Note
View Note
How to use USB mode

How to use USB mode

Type

Playable data

USB mode

MP3/WMA/AAC/OGG file

This unit does not support a USB 3.0 device. In addition, other devices may not be supported depending on the model or OS version.

The recommended capacity of the USB memory is 16 GB or less.

USB devices formatted to FAT32 are supported (USB devices formatted to other formats such as NTFS are not supported).

Playback

  1. Select the icon on the home screen to display the Entertainment screen.

  2. Select or to switch the USB mode. The following icons are displayed in the lower part of the center display.

Icon

Function

Displays the Entertainment menu. Use to switch to a different audio source.

Category list is displayed.

Current track list is displayed.

Select a desired track to play it.

Plays the current track repeatedly.

Select it again to play the tracks in the current track list repeatedly.

When selected again, the function is canceled.

Tracks in the current track list are played randomly.

Select it again to cancel.

Starts playing a track similar to the current track using Gracenote®'s More Like This™.

Select the desired song from the category list to cancel More Like This™.

If selected within a few seconds from the beginning of a song which has started to play, the previous song is selected.

If more than a few seconds have elapsed, the song currently being played is replayed from the beginning.

Long-press to fast reverse. It stops when you remove your hand from the icon or the commander knob.

Track is played. When selected again, playback is temporarily stopped.

Advances to the beginning of the next song.

Long-press to fast forward.

Displays sound settings to adjust audio quality level.

Refer to Volume/Display/Sound Controls (Search).

 

  • If a file name in the USB memory is too long, it could cause operation problems such as not being able to playback the song.

    (Recommended: Within 80 characters)

  • The album art may not display depending on the album art size.

  • To move to the desired location on the track, move the slider indicating the playback time.

  • The appearance of the repeat and shuffle icons changes depending on the type of operation in which the function is used.

Close Note
View Note

Category list

Select the icon to display the following category list.

Select a desired category and item.

Category

Function

Playlist*1

Displays playlists on the device.

Artist

Displays the artist name list.

All the tracks or tracks for each album of the selected artist can be played.

Album

Displays the album name list.

Song

All the tracks in the device are displayed.

Genre

Displays the genre list.

All the tracks or tracks per album or artist in the selected genre can be played.

Audiobook*2

Displays the audiobook list.

Chapters can be selected and played.

Podcast*2

Displays the podcast list.

Episode can be selected and played.

Apple Music Radio*2 (Some Models)

Displays Apple Music Radio stations.

A station can be selected and played.

Folder*3

Displays the folder/file list.

  1. Playlist folders of Apple devices are not supported.

  2. Apple device only

  3. USB-Sticks and USB-Android™ device only

Example of use (to play all tracks in USB device)

(Method 1)

  1. Select to display the category list.

  2. Select .

    All the tracks in the USB device are displayed.

  3. Select a desired track.

    The selected track is played. All the tracks in the USB device can be played by continuing playback.

 

Only the tracks in the desired category selected in Step 2 are played.

Close Note
View Note

(Method 2)*1

  1. Select to display the category list.

  2. Select .

    All the folders in the USB device are displayed.

  3. Select .

    All the tracks in the USB device are displayed.

  4. Select a desired track.

    The selected track is played. All the tracks in the USB device can be played by continuing playback.

  1. Can be operated using an Android™ device or USB flash memory.

 

Only the tracks in the desired folder selected in Step 3 are played.

Close Note
View Note

Gracenote® Database

When a USB device is connected to this unit and the audio is played, the album name, artist name, genre and title information are automatically displayed if there is a match in the vehicle's database compilation to the music being played. The information stored in this device uses database information in the Gracenote® music recognition service.

 

For information related to the most recent Gracenote® database which can be used and how to install it, go to the Mazda Hands Free Website:

http://www.mazdahandsfree.com

Close Caution
View Caution

Introduction

Gracenote, the Gracenote logo and logotype are either a registered trademark or a trademark of Gracenote, Inc. in the United States and/or other countries.

 

Gracenote® End User License Agreement

This application or device contains software from Gracenote, Inc. of Emeryville, California (“Gracenote”). The software from Gracenote (the “Gracenote Software”) enables this application to perform disc and/or file identification and obtain music-related information, including name, artist, track, and title information (“Gracenote Data”) from online servers or embedded databases (collectively, “Gracenote Servers”) and to perform other functions. You may use Gracenote Data only by means of the intended End-User functions of this application or device.

You agree that you will use Gracenote Data, the Gracenote Software, and Gracenote Servers for your own personal non-commercial use only. You agree not to assign, copy, transfer or transmit the Gracenote Software or any Gracenote Data to any third party. YOU AGREE NOT TO USE OR EXPLOIT GRACENOTE DATA, THE GRACENOTE SOFTWARE, OR GRACENOTE SERVERS, EXCEPT AS EXPRESSLY PERMITTED HEREIN.

You agree that your non-exclusive license to use the Gracenote Data, the Gracenote Software, and Gracenote Servers will terminate if you violate these restrictions. If your license terminates, you agree to cease any and all use of the Gracenote Data, the Gracenote Software, and Gracenote Servers. Gracenote reserves all rights in Gracenote Data, the Gracenote Software, and the Gracenote Servers, including all ownership rights. Under no circumstances will Gracenote become liable for any payment to you for any information that you provide. You agree that Gracenote, Inc. may enforce its rights under this Agreement against you directly in its own name.

The Gracenote service uses a unique identifier to track queries for statistical purposes. The purpose of a randomly assigned numeric identifier is to allow the Gracenote service to count queries without knowing anything about who you are. For more information, see the web page for the Gracenote Privacy Policy for the Gracenote service.

The Gracenote Software and each item of Gracenote Data are licensed to you “AS IS.”

Gracenote makes no representations or warranties, express or implied, regarding the accuracy of any Gracenote Data from in the Gracenote Servers. Gracenote reserves the right to delete data from the Gracenote Servers or to change data categories for any cause that Gracenote deems sufficient. No warranty is made that the Gracenote Software or Gracenote Servers are error-free or that functioning of Gracenote Software or Gracenote Servers will be uninterrupted. Gracenote is not obligated to provide you with new enhanced or additional data types or categories that Gracenote may provide in the future and is free to discontinue its services at any time.

GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND NON-INFRINGEMENT. GRACENOTE DOES NOT WARRANT THE RESULTS THAT WILL BE OBTAINED BY YOUR USE OF THE GRACENOTE SOFTWARE OR ANY GRACENOTE SERVER. IN NO CASE WILL GRACENOTE BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES OR FOR ANY LOST PROFITS OR LOST REVENUES.

© Gracenote, Inc. 2009

Updating the database

The Gracenote® media database can be updated using USB device.

  1. Connect a USB device containing the software for updating Gracenote®.

  2. Select the icon on the home screen to display the Settings screen.

  3. Select the tab and select .

  4. Select . The list of the update package stored in the USB device and the version are displayed.

  5. Select the package to use the update.

  6. Select .

 

Gracenote® can be downloaded from the Mazda Hands-free Website.

Close Note
View Note
How to use Apple CarPlay™ (Some Models)

How to use Apple CarPlay™ (Some Models)

What is Apple CarPlay™?

Apple CarPlay™ allows you to make calls, send or receive messages, and listen to music using your iPhone® with the vehicle's audio system, or search for destinations using the maps. In addition, voice recognition operation is possible using Siri®.

 

  • YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT USE OF APPLE CARPLAY™ (“THE APPLICATION”) IS AT YOUR SOLE RISK AND THAT THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE, ACCURACY AND EFFORT IS WITH YOU TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, AND THAT THE APPLICATION AND INFORMATION ON THE APPLICATION IS PROVIDED “AS IS” AND “AS AVAILABLE”, WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, AND MAZDA HEREBY DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH RESPECT TO THE APPLICATION AND INFORMATION ON THE APPLICATION, EITHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY, QUIET ENJOYMENT, AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. AS EXAMPLES, AND WITHOUT LIMITATION, MAZDA DISCLAIMS ANY WARRANTY REGARDING THE ACCURACY OF DATA PROVIDED BY THE APPLICATION, SUCH AS THE ACCURACY OF DIRECTIONS, ESTIMATED TRAVEL TIME, SPEED LIMITS, ROAD CONDITIONS, NEWS, WEATHER, TRAFFIC, OR OTHER CONTENT PROVIDED BY APPLE, ITS AFFILIATES, OR THIRD PARTY PROVIDERS; MAZDA DOES NOT GUARANTEE AGAINST LOSS OF APPLICATION DATA, WHICH MAY BE LOST AT ANY TIME; MAZDA DOES NOT GUARANTEE THAT THE APPLICATION OR ANY SERVICES PROVIDED THROUGH THEM WILL BE PROVIDED AT ALL TIMES OR THAT ANY OR ALL SERVICES WILL BE AVAILABLE AT ANY PARTICULAR TIME OR LOCATION. FOR EXAMPLE, SERVICES MAY BE SUSPENDED OR INTERRUPTED WITHOUT NOTICE FOR REPAIR, MAINTENANCE, SECURITY FIXES, UPDATES, ETC., SERVICES MAY BE UNAVAILABLE IN YOUR AREA OR LOCATION, ETC. IN ADDITION, YOU UNDERSTAND THAT CHANGES IN THIRD PARTY TECHNOLOGY OR GOVERNMENT REGULATION MAY RENDER THE SERVICES AND/OR APPLICATIONS OBSOLETE AND/OR UNUSABLE.

    TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT SHALL MAZDA OR ITS AFFILIATES BE LIABLE FOR PERSONAL INJURY, OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, CORRUPTION OR LOSS OF DATA, FAILURE TO TRANSMIT OR RECEIVE ANY DATA, BUSINESS INTERRUPTION OR ANY OTHER COMMERCIAL DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO THE APPLICATION OR YOUR USE OF OR INABILITY TO USE THE APPLICATION OR INFORMATION ON THE APPLICATION.

  • When using Apple CarPlay™, please avoid distraction and use Apple CarPlay™ responsibly. Stay fully aware of driving conditions and always obey applicable laws.

Close Caution
View Caution

 

  • Apple CarPlay™ is provided by Apple® and its use is subject to your agreement to the Apple CarPlay™ terms of use, which are included as part of the Apple iOS terms of use.

  • When using Apple CarPlay™, location, speed, and other vehicle data is transferred to your iPhone®. For further details, refer to Apple®’s Privacy Policy.

Close Note
View Note

Switching to Apple CarPlay™

Connect the iPhone® by inserting the Apple®-genuine connector cord to the USB terminal indicated by the mark.

Refer to How to connect USB port/Auxiliary jack (Search).

 

  • When you switch your iPhone® connection from Bluetooth® to the vehicle's USB terminal, the system switches to Apple CarPlay™. The applications which was being used via Bluetooth® connection can be used continuously. However, the available functions of the applications using Bluetooth® connection and those on Apple CarPlay™ may differ.

  • If the iPhone® is connected to the USB terminal not indicated by the mark, the system operates in USB mode.

Close Note
View Note

Display of Apple CarPlay™ Screen

Use any of the following methods to display the Apple CarPlay™ screen in the center display.

  • Select on the home screen.

  • Long press on the commander switch.

  • Select on the home screen, and select from the Applications screen.

Apple CarPlay™ home screen

 

The icons and icon positions displayed on the Apple CarPlay™ home screen may differ depending on the connected iPhone® and iOS version.

Close Note
View Note

No.

Icon

Explanation

Icon for connected iPhone®

Launches the Apple CarPlay™ application.

Refer to the help information available with each application for the method of using each application.

Switches to the Mazda Connect home screen.

Displays the Apple CarPlay™ home screen.

Convenient Ways to Use Apple CarPlay™

Item

Operation method

Activating the voice recognition function (Siri®)*1

Activate Siri® using any of the following two methods to operate Apple CarPlay™ by voice.

  • Press the talk button on the audio control switch.

  • Press and hold .

To display the Now Playing screen

When music is playing in Apple CarPlay™ and a screen other than the Now Playing screen is being displayed, press on the commander switch to display the Now Playing screen.

To display the MAP screen

When using map route guidance in Apple CarPlay™ and a screen other than the MAP screen is being displayed, press on the commander switch to display the MAP screen.

To return to Mazda Connect screen

Press and hold on the commander switch.

  1. The voice recognition function of Mazda Connect cannot be used while Apple CarPlay™ is connected.

To End Apple CarPlay™

To end Apple CarPlay™, disconnect the Apple®-genuine connector cord from the USB terminal and disconnect the iPhone® from the connector cord.

 

If the connector cord is disconnected from the USB terminal during music playback using Apple CarPlay™, the audio source selection will no longer be available and the vehicle's audio device will be muted.

Close Note
View Note
How to use Android Auto™ mode (Some Models)

What is Android Auto™?

Android Auto™ is an application which allows the operation of an Android™ Smartphone using the vehicle's audio. Android Auto™ functions such as the phone, messages, music, and map can be used with the vehicle's audio system.

 

  • YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT USE OF ANDROID AUTO™ (“THE APPLICATION”) IS AT YOUR SOLE RISK AND THAT THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE, ACCURACY AND EFFORT IS WITH YOU TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, AND THAT THE APPLICATION AND INFORMATION ON THE APPLICATION IS PROVIDED “AS IS” AND “AS AVAILABLE,” WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, AND MAZDA HEREBY DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH RESPECT TO THE APPLICATION AND INFORMATION ON THE APPLICATION, EITHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY, QUIET ENJOYMENT, AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. AS EXAMPLES, AND WITHOUT LIMITATION, MAZDA DISCLAIMS ANY WARRANTY REGARDING THE ACCURACY OF DATA PROVIDED BY THE APPLICATION, SUCH AS THE ACCURACY OF DIRECTIONS, ESTIMATED TRAVEL TIME, SPEED LIMITS, ROAD CONDITIONS, NEWS, WEATHER, TRAFFIC, OR OTHER CONTENT PROVIDED BY GOOGLE, ITS AFFILIATES, OR THIRD PARTY PROVIDERS; MAZDA DOES NOT GUARANTEE AGAINST LOSS OF APPLICATION DATA, WHICH MAY BE LOST AT ANY TIME; MAZDA DOES NOT GUARANTEE THAT THE APPLICATION OR ANY SERVICES PROVIDED THROUGH THEM WILL BE PROVIDED AT ALL TIMES OR THAT ANY OR ALL SERVICES WILL BE AVAILABLE AT ANY PARTICULAR TIME OR LOCATION. FOR EXAMPLE, SERVICES MAY BE SUSPENDED OR INTERRUPTED WITHOUT NOTICE FOR REPAIR, MAINTENANCE, SECURITY FIXES, UPDATES, ETC., SERVICES MAY BE UNAVAILABLE IN YOUR AREA OR LOCATION, ETC. IN ADDITION, YOU UNDERSTAND THAT CHANGES IN THIRD PARTY TECHNOLOGY OR GOVERNMENT REGULATION MAY RENDER THE SERVICES AND/OR APPLICATIONS OBSOLETE AND/OR UNUSABLE.

    TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT SHALL MAZDA OR ITS AFFILIATES BE LIABLE FOR PERSONAL INJURY, OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, CORRUPTION OR LOSS OF DATA, FAILURE TO TRANSMIT OR RECEIVE ANY DATA, BUSINESS INTERRUPTION OR ANY OTHER COMMERCIAL DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO THE APPLICATION OR YOUR USE OF OR INABILITY TO USE THE APPLICATION OR INFORMATION ON THE APPLICATION.

  • When using Android Auto™, please avoid distraction and use Android Auto™ responsibly. Stay fully aware of driving conditions and always obey applicable laws.

Close Caution
View Caution

 

  • Android Auto™ is provided by Google and its use is subject to your agreement to the Android Auto™ terms of use.

  • When using Android Auto™, location, speed, and other vehicle data is transferred to your smart phone. For further details, refer to Google’s Privacy Policy.

Close Note
View Note

How to use the Android Auto™ mode

Insert an Android™ Smartphone-genuine connector cord into the USB terminal indicated by the icon to connect the Smartphone.

Refer to How to connect USB port/Auxiliary jack (Search).

 

  • When an Android™ Smartphone connected to Bluetooth® is connected to the vehicle's USB terminal, Bluetooth® is used by Android Auto™ and the system switches to Android Auto™ mode.

  • If the Android™ Smartphone is connected to a USB terminal with no icon indicated, the system operates in USB mode.

Close Note
View Note

Display of Android Auto™ Mode Screen

Use any of the following methods to display the Android Auto™ mode screen in the center display.

  • Select on the home screen, and select from the Applications screen.

  • Select on the home screen.

  • Press and hold on the commander switch.

Android Auto™ mode home screen

 

The media displayed on the Android Auto™ home screen may differ depending on the use conditions and version of the connected Android™ Smartphone.

Close Note
View Note

No.

Icon

Explanation

－

Displays the use history of each application. The displayed contents differ depending on the application that has been started and its status.

Switches to the map application.

Switches to the call mode.

Displays the Android Auto™ home screen.

Switches to the Music application.

Switches to the Mazda Connect home screen.

Convenient ways to use Android Auto™ mode

Item

Operation method

Operation using voice recognition*1

Any of the following methods can be used to start the voice recognition mode and operate Android Auto™ by voice.

  • Speak the words, “OK Google”.

  • Select the icon on the Android Auto™ screen.

  • Press and hold the talk button on the audio remote control switch.

To display the NowPlaying screen

When music is playing in Android Auto™ and a screen other than the NowPlaying screen is being displayed, press on the commander switch to display the NowPlaying screen.

To display the MAP screen

When using map route guidance in Android Auto™ or a screen other than the MAP screen is being displayed, press on the commander switch to display the Android Auto™ MAP screen.

To return to the Mazda Connect screen

Press and hold on the commander switch.

  1. The voice recognition function of Mazda Connect cannot be used while Android Auto™ is connected.

To end Android Auto™

To end the Android Auto™ mode, disconnect the Android™-genuine connector cord from the USB terminal or disconnect the Android™ Smartphone from the connector cord.

If Android Auto™ cannot be connected

When the message, “Mobile Device Error”, is displayed and Android Auto™ cannot be connected.

Make sure that the Android™ Smartphone in question is compatible with Android Auto™.

Before trying to reconnect your Android™ Smartphone to the connector cord, do the Bluetooth® device pairing again.

If the Android Auto™ connection setting cannot be changed

Depending on your Android™ Smartphone, the connection setting may have been in charging mode only when the connector cord is connected.

In this case, switch off the Android Auto™ connection setting once, and then switch it back on while connected to USB mode.

The connection setting can be changed to the Android Auto™ connection in the tab on the Settings screen (Search).

Bluetooth®

Bluetooth®

Introduction

Bluetooth® Hands-Free outline

When a Bluetooth® device (mobile phone) is connected to the vehicle's Bluetooth® unit via radio wave transmission, a call can be made or received by pressing the talk button, pick-up button, or hang-up button on the audio remote control switch, or by operating the center display. For example, even if a device (mobile phone) is in your coat pocket, a call can be made without taking the device (mobile phone) out and operating it directly.

Bluetooth® audio outline

When a portable audio unit equipped with the Bluetooth® communication function is paired to the vehicle, you can listen to music stored on the paired portable audio device from the vehicle's speakers. It is not necessary to connect the portable audio device to the vehicle's external input terminal. After programming, operate the vehicle audio control panel to play/stop the audio.

 

 

  • For your safety, a device can be paired only when the vehicle is parked. If the vehicle starts to move, the pairing procedure will end. Park the vehicle in a safe place before pairing.

  • The communication range of a Bluetooth® equipped device is about 10 meters (32 ft) or less.

  • Basic audio operation is available using voice commands even if Bluetooth® is not connected.

  • For safety reasons, operation of the center display is disabled while the vehicle is being driven. However, items not displayed in gray can be operated using the commander switch while the vehicle is being driven.

Close Note
View Note

 

Some Bluetooth® mobile devices are not compatible with the vehicle. Consult an Authorized Mazda Dealer, Mazda's call center or Web support center for information regarding Bluetooth® mobile device compatibility:

 

Close Caution
View Caution

Applicable Bluetooth® specification (Recommended)

Ver. 1.1/1.2/2.0 EDR/2.1 EDR/3.0 (conformity)

Component Parts

Microphone (hands-free)

The microphone is used for speaking voice commands or when making a Hands-free call.

Talk button

Activates the voice recognition. In addition, it skips the voice guidance.

Pick-up button

Responds to incoming calls. In addition, after selecting a contact or dialing a number, it places the call when the button is pressed.

Hang-up button

Ends the call or refuses an incoming call. In addition, it ends the voice recognition operation.

Commander switch

The commander switch is used for volume adjustment and display operation. Tilt or turn the commander knob to move the cursor. Press the commander knob to select the icon.

Volume adjustment

The volume dial of the commander switch is used to adjust the volume. Turn the dial to the right to increase volume, to the left to decrease it.

The volume can also be adjusted using the volume button on the steering wheel.

 

  • Press the volume dial to switch the audio MUTE on and off.

  • If the volume is lower compared to other audio modes, increase the volume from the device side.

Close Note
View Note

 

Conversation volume and the volume of the voice guidance and ringtone can each be set in advance.

  1. Select the icon on the home screen to display the Communication screen.

  2. Select .

  3. Adjust the and the using the slider.

Bluetooth® Preparation

Bluetooth® Preparation

Device pairing

To use Bluetooth® audio and Hands-Free, the device equipped with Bluetooth® has to be paired to the unit using the following procedure. A maximum of 7 devices including Bluetooth® audio devices and hands-free mobile phones can be paired.

 

  • The Bluetooth® system may not operate for 1 or 2 minutes after the ignition is switched to ACC or ON. However, this does not indicate a problem. If the Bluetooth® system does not connect automatically after 1 or 2 minutes have elapsed, make sure that the Bluetooth® setting on the device is normal and attempt to reconnect the Bluetooth® device from the vehicle side.

  • If Bluetooth®-enabled devices are used in the following locations or conditions, connection via Bluetooth® may not be possible.

    • The device is in a location hidden from the center display such as behind or under a seat, or inside the glove compartment.

    • The device contacts or is covered by a metal object or body.

    • The device is set to power-saving mode.

Close Note
View Note

Pairing Procedure

  1. Select the icon on the home screen to display the Settings screen.

  2. Select the tab.

  3. Select .

  4. Turn the Bluetooth® setting on.

  5. Select to display the message and switch to the device operation.

  6. Using your device, perform a search for the Bluetooth® device (Peripheral device).

  7. Select “Mazda” from the device list searched by the device.

  8. (Device with Bluetooth® version 2.0)

    Input the displayed 4-digit pairing code into the device.

    (Device with Bluetooth® version 2.1 or higher)

    Make sure the displayed 6-digit code on the audio is also displayed on the device, and touch the .

    Connection permission and phonebook access permission for your mobile device may be required depending on the mobile device.

  9. If pairing is successful, the functions of the device connected to Bluetooth® are displayed.

  10. (Devices compatible with Mazda E-mail / SMS function)

    SMS (Short Message Service) messages, and E-mail for the device are downloaded automatically. A download permission operation for your device may be required depending on the device.

 

  • When Call history and messages are downloaded automatically, each automatic download setting must be on.

    Refer to Communication Settings (Search).

Close Note
View Note

After a device is registered, the system automatically identifies the device. By activating Bluetooth® Hands-Free again, or by activating Bluetooth® Hands-Free first after switching the ignition from OFF to ACC, the device connection condition is indicated in the center display.

IMPORTANT note about pairing and automatic reconnection:

  • If pairing is redone on the same mobile phone device, first clear “Mazda” displayed on the Bluetooth® setting screen of the mobile device.

  • When the OS of the device is updated, the pairing information may be deleted. If this happens, reprogram the pairing information to the Bluetooth® unit.

  • Before you pair your device, make sure that Bluetooth® is “ON”, both on your phone and on the vehicle.

Device selection

If several devices have been paired, the Bluetooth® unit links the device last paired. If you would like to link a different paired device, it is necessary to change the link. The order of device priority after the link has been changed is maintained even when the ignition is switched off.

 

Connecting other devices

  1. Select the icon on the home screen to display the Settings screen.

  2. Select the tab.

  3. Select .

  4. Turn the Bluetooth® setting on.

  5. Select the name of the device you would like to connect.

  6. selection

    Connects both devices as hands-free and Bluetooth® audio.

    selection

    Connects as a hands-free device.

    selection

    Connects as Bluetooth® audio.

 

The following functions can be used for the Hands-free or audio.

  • Hands-free: Phone calls and E-mail/SMS

  • Audio: Bluetooth® audio, Pandora®, Aha™, Stitcher™ radio

Close Note
View Note

Disconnecting a device

  1. Select the icon on the home screen to display the Settings screen.

  2. Select the tab.

  3. Select .

  4. Turn the Bluetooth® setting on.

  5. Select the device name which is currently connected.

  6. Select .

Changing PIN code

PIN code (4 digits) can be changed.

  1. Select the icon on the home screen to display the Settings screen.

  2. Select the tab.

  3. Select .

  4. Select .

  5. Select .

  6. Input the new PIN code to be set.

  7. Select .

Available Language

Available Language

The Bluetooth® Hands-Free System applies to the following languages:

  • English

  • Spanish

  • French

Refer to Settings (Search).

Bluetooth® Audio

Bluetooth® Audio

Applicable Bluetooth® specification (Recommended)

Ver. 1.1/1.2/2.0 EDR/2.1 EDR/3.0 (conformity)

Response profile

  • A2DP (Advanced Audio Distribution Profile) Ver. 1.0/1.2

  • AVRCP (Audio/Video Remote Control Profile) Ver. 1.0/1.3/1.4

 

A2DP is a profile which transmits only audio to the Bluetooth® unit. If your Bluetooth® audio device corresponds only to A2DP, but not AVRCP, you cannot operate it using the control panel of the vehicle's audio system. In this case, only the operations on the mobile device are available the same as when a portable audio device for a non-compliant Bluetooth® device is connected to the AUX terminal.

Function

A2DP

AVRCP

Ver. 1.0

Ver. 1.3

Ver. 1.4

Playback

X

X

X

X

Pause

X

X

X

X

File (Track) up/down

—

X

X

X

Reverse

—

—

X

X

Fast-forward

—

—

X

X

Text display

—

—

X

X

Repeat

—

—

Depends on device

Depends on device

Shuffle

—

—

Depends on device

Depends on device

Scan

—

—

Depends on device

Depends on device

Folder up/down

—

—

—

Depends on device

X: Available

—: Not available

 

  • The battery consumption of Bluetooth® audio devices increases while Bluetooth® is connected.

  • If a general mobile phone device is USB connected during music playback over the Bluetooth® connection, the Bluetooth® connection is disconnected. For this reason, you cannot have music playback over a Bluetooth® connection and music playback using a USB connection at the same time.

  • If a device which supports AVRCP Ver. 1.6 or higher is connected, song information may not display correctly.

  • The system may not operate normally depending on the Bluetooth® audio device.

Close Note
View Note

Switching to Bluetooth® audio mode

To listen to music or voice audio recorded to a Bluetooth® audio device, switch to the Bluetooth® audio mode to operate the audio device using the audio system control panel. Any Bluetooth® audio device must be paired to the vehicle's Bluetooth® unit before it can be used.

Refer to Bluetooth® Preparation (Search).

  1. Turn on the Bluetooth® audio device's power.

  2. Switch the ignition to ACC or ON.

  3. Select the icon on the home screen to display the Entertainment screen.

  4. When is selected, switches to the Bluetooth® audio mode to begin playback.

 

  • If the Applications screen is not displayed on the device, Bluetooth® audio may not play on the center display.

  • If Bluetooth® audio is used after using Pandora®, Aha™ or Stitcher™ radio, the application on the mobile device has to be closed first.

  • If the Bluetooth® audio device does not begin playback, select the icon.

  • If the mode is switched from Bluetooth® audio mode to another mode (radio mode), audio playback from the Bluetooth® audio device stops.

Close Note
View Note

Playback

To listen to a Bluetooth® audio device over the vehicle's speaker system, switch the mode to Bluetooth® audio mode. (Refer to “Switching to Bluetooth® audio mode”)

After switching to the Bluetooth® audio mode, the following icons are displayed in the lower part of the display. Icons which can be used differ depending on the version of the Bluetooth® audio device which you are currently using.

Icon

Function

Displays the Entertainment menu. Use to switch to a different audio source.

(AVRCP Ver. 1.4 only)

Displays the top level folder/file list.

Select the folder which you want to select.

The files in the selected folder are displayed.

Select the file you want to play.

(AVRCP Ver. 1.3 or higher)

Replays the song currently being played repeatedly.

When selected again, the songs in the folder are played repeatedly.

Select it again to cancel.

Icons change when the song is repeated or the folder is repeated.

(AVRCP Ver. 1.3 or higher)

Plays songs in the folder in random order.

When selected again, the songs on the device are played in random order.

Select it again to cancel.

Icons change during folder shuffle or device shuffle.

Scans the titles in a folder and plays the beginning of each song to aid in finding a desired song.

When selected again, the beginning of each song on the device is played.

When selected again, the operation is canceled and the song currently being played continues.

Returns to the beginning of the previous song.

Long-press to fast reverse. It stops when you remove your hand from the icon or the commander knob.

Plays the Bluetooth® audio. When selected again, playback is temporarily stopped.

Advances to the beginning of the next song.

Long-press to fast forward. It stops when you remove your hand from the icon or the commander knob.

Displays sound settings to adjust audio quality level.

Refer to Volume/Display/Sound Controls (Search).

Bluetooth® Audio Device Information Display

If a Bluetooth® audio device is connected, the following information is displayed in the center display.

AVRCP Ver. lower than 1.3

AVRCP Ver. 1.3

AVRCP Ver. 1.4 or higher

Device name

X

X

X

Remaining battery charge of device

X

X

X

Song name

—

X

X

Artist name

—

X

X

Album name

—

X

X

Playback time

—

X

X

Genre name

—

X

X

Album art image

—

—

—

X: Available

—: Not available

 

Some information may not display depending on the device, and if the information cannot be displayed, “Unknown - - -” is indicated.

Close Note
View Note
How to Use Pandora®

How to Use Pandora®

Playback

Select the icon on the home screen to display the Entertainment screen. When is selected, the following icons are indicated in the bottom part of the center display.

Icon

Function

Displays the Entertainment menu. Use to switch to a different audio source.

Displays the station list.

Use to switch to other stations.

Thumbs-Down

Press the icon to tell Pandora® not to play this track.

Thumbs-Up

Press the icon to tell Pandora® “you like this track” and it helps to bring in more tracks like it to your station.

Bookmarking

Bookmarks the song or artist currently being played.

Plays the track. When selected again, playback is temporarily stopped.

Goes to the next song.

Displays sound settings to adjust audio quality level.

Refer to Volume/Display/Sound Controls (Search).

 

  • The skip function may not be available depending on the device.

  • The number of skips is limited by Pandora®.

  • If the icon is selected when the skip song function is running, the next song is skipped.

Close Note
View Note

Selection from station list

Selection can be made from a programmed radio station list.

  1. Select the icon.

  2. Select the desired radio station.

 

When is selected, songs randomly selected from the radio station list are played.

Close Note
View Note

Selecting the sort method

The displayed order of the station list can be changed.

  1. Select the icon.

  2. Select .

  3. Select to display in the order starting from the newly created station.

  4. Select to display in alphabetical order.

 

The displayed order of cannot be changed.

Close Note
View Note

Bookmarking

You can bookmark song or artist to check out later on the Web.

  1. Select the icon.

  2. Select to bookmark the song.

  3. Select to bookmark the artist.

How to Use Aha™

How to Use Aha™

What is Aha™?

Aha™*1 is an application which can be used to enjoy various Internet content such as Internet radio and podcasts.

Stay connected to your friends activities by getting updates from Facebook and Twitter.

Using the location-based service, nearby services and destinations can be searched or real-time local information can be obtained.

For details on Aha™, refer to “http://www.aharadio.com/”.

  1. Aha™, the Aha™ logo, and the Aha™ trade dress are trademarks or registered trademarks of Harman International Industries, Inc., used with permission.

 

  • The service content provided by Aha™ varies depending on the country in which the user resides. In addition, the service is not available in some countries.

  • To operate Aha™ from your Bluetooth® device, perform the following in advance:

    • Install the Aha™ application to your device.

    • Create an Aha™ account for your device.

    • Log onto Aha™ using your device.

    • Select the preset station on your device.

  • If the Applications screen is not displayed on the device, Aha™ may not play on the center display.

Close Note
View Note

Playback

Select the icon on the home screen to display the Entertainment screen. When is selected, the following icons are displayed at the bottom of the center display. The displayed icon differs depending on the selected station.

In addition, icons other than the following icons may be displayed.

Icon

Function

Displays the Entertainment menu. Use to switch to a different audio source.

Displays the main menu.

Use to switch to other stations.

Displays the content list.

Use to switch to other desired content on the station.

Like*1

Evaluates the current content as “Like”.

Dislike*1

Evaluates the current content as “Dislike”.

Reverses for 15 seconds.

Map (vehicles with navigation system)

Displays the destination searched by the location based services on the navigation system.

Call

A call can be made to the telephone number of a shop searched using the Location Based Services. Available when a device is connected as a Hands-Free.

Returns to the previous content.

Pauses playback of the content. When selected again, playback resumes.

Goes to the next content.

Fast-forwards for 30 seconds.

Displays sound settings to adjust audio quality level.

Refer to Volume/Display/Sound Controls (Search).

  1. Some stations may use alternate variations of Like and Dislike, based on station type or provider.

Main menu

Select the icon.

Switch the tab and select the station category.

Tab

Function

Presets

Displays the preset station list set on the device.

Select the preset station name to play the station content.

Nearby

Select the desired station.

Guidance is provided to the searched destination near the vehicle's position.

You can designate desired categories previously set using the filter setting on your device.

 

The available Location Based Services may differ because the services depend on the content provided by Aha™.

Close Note
View Note

Example of use (Location Based Services)

  1. Select the desired station from the “Nearby” tab on the main menu.

    The destination name or address playback starts in the order of the destination name list.

  2. When the icon is selected, the currently displayed destination is displayed on the navigation system (vehicles with navigation system).

  3. When the icon is selected, a phone call is placed to the currently displayed destination.

  4. Select the icon to display the content list.

    Selection of other destinations from the list can be made.

Bluetooth® Hands-Free

Bluetooth® Hands-Free

Making a Call

For Mazda Connect, making calls is possible using any of the following six methods:

  • Phonebook downloaded from Bluetooth® device (mobile phone) (voice recognition function can be used)

  • Favorites

  • Call record

  • Dialing a telephone number (voice recognition function can be used)

  • “Redial” - Voice recognition command for making a call to the latest outgoing call record.

  • “Call back” - Voice recognition command for making a call to the latest incoming call record.

Phonebook Usage

Telephone calls can be made by saying the contact name in the downloaded phonebook or the name of a person whose phone number has been registered in the Bluetooth® Hands-Free. Refer to Import contact (Download Phonebook).

  1. Press the talk button.

  2. Wait for the beep sound.

  3. Say: “Call XXXXX... (Ex. “John”) Mobile”. (You can also say, “Home”, “Work”, or “Other” instead of “Mobile”, depending on how you set up your contact information.)

  4. Follow the voice guidance to make the call, or simple press the pick-up button on the steering switch during or after the guidance to make the call.

Screen operation

  1. Select the icon on the home screen to display the Communication screen.

  2. Select to display the contact list.

  3. Select the contact you would like to call to display the details for the contact.

  4. Select the desired phone number to make the call.

Import contact (Download Phonebook)

Phonebook data from your device (Mobile phone) can be sent and registered to your Bluetooth® Hands-Free phonebook using Bluetooth®.

(Automatic downloading)

The “Auto Download Contacts” setting must be on. When hands-free is connected to the device, the phonebook is downloaded automatically.

Refer to Communication Settings (Search).

(Manually downloading)

If the “Auto Download Contacts” setting is off, download the phonebook using the following procedure.

  1. Select the icon on the home screen to display the Communication screen.

  2. Select to display the contact list.

  3. Select .

  4. Select or to switch to the device operation.

  5. If is selected, select .

  6. Download will be started from the mobile phone.

 

  • If “Import All Contacts” is performed after saving the phonebook to the Bluetooth® unit, the phonebook will be overwritten.

  • A maximum of 1,000 contacts can be registered to the phonebook.

  • Phonebook, incoming/outgoing call record, and favorite memories are exclusive to each mobile phone to protect privacy.

Close Note
View Note

Favorites Contacts

A maximum of 50 contacts can be registered. It will take less time to make a call after registering the telephone number. In addition, you do not have to look for the person you want to call in the phonebook.

Registering your favorites

  1. Select the icon on the home screen to display the Communication screen.

  2. Select to display the favorites list.

  3. Select .

  4. Select or .

  5. Select from the displayed list.

 

When “Add New Contact” is selected, information such as the selected person’s name is also registered. In addition, when “Add New Contact Details” is selected, only the telephone number of the selected person is registered.

Close Note
View Note

Calling a favorite

  1. Select the icon on the home screen to display the Communication screen.

  2. Select to display the favorites list.

  3. (If only one phone number is registered to contact)

    Select the contact information you would like to call. Go to Step 5.

    (If multiple phone numbers are registered to contact)

    Select the contact you would like to call to display the screen indicating the details for the contact. Go to Step 4.

  4. Select the phone number you would like to call.

  5. Select .

Deleting a favorite

  1. Select the icon on the home screen to display the Communication screen.

  2. Select to display the favorites list.

  3. Select .

  4. Select .

  5. Select the contact information which you would like to delete.

  6. Select .

Changing the display order of your favorites list

  1. Select the icon on the home screen to display the Communication screen.

  2. Select to display the favorites list.

  3. Select .

  4. Select .

  5. The contact can be moved after it is selected.

  6. Slide the contact or move it using the commander switch, then select .

Changing contact name of your favorites

  1. Select the icon on the home screen to display the Communication screen.

  2. Select to display the favorites list.

  3. Select .

  4. Select .

  5. Select the contact to display the keyboard screen.

  6. If a new name is input and is selected, the contact name is stored.

 

If the contact is long-pressed when the favorites list is displayed, the contact information can be edited (deleted, moved).

Close Note
View Note

Telephone Number Input

 

Practice this while parked until you are confident you can do it while driving in a non-taxing road situation. If you are not completely comfortable, make all calls from a safe parking position, and only start driving when you can devote your full attention to driving.

Close Note
View Note

  1. Select the icon on the home screen to display the Communication screen.

  2. When is pressed, the dial pad is displayed.

  3. Input the telephone number using the dial pad.

  4. Select to make the call.

Numeral or symbol entry

Use the dial pad.

Long-press the to input +.

Select to delete the currently input value.

Long-press to delete all input values.

Redial Function

Makes a call to the last person called (latest person on outgoing call record) from the mobile phone/vehicle.

  1. Press the talk button.

  2. Wait for the beep sound.

  3. Say: “Redial”

Call back Function

Makes a call to the last person who called your (latest person on incoming call record) mobile phone/vehicle.

  1. Press the talk button.

  2. Wait for the beep sound.

  3. Say: “Call back”

Mobile 911 (U.S.A./Canada only)

If the vehicle is involved in a moderate to severe collision, a call is made automatically to 911 from the connected device. The “Emergency Assistance Call” setting must be on.

Refer to Communication Settings (Search).

 

Though the system can be set to not call 911, doing so will defeat the purpose of the system. Mazda recommends that the Mobile 911 system remain activated.

Close Caution
View Caution

 

  • Mobile 911 is a secondary function of the audio entertainment system. Therefore, the mobile 911 function does not assure that the call is always made to 911 after an accident occurs.

  • A Hands-free device must be paired and connected. The 911 operator can verify the vehicle's position information using the Hands-free device GPS if equipped.

Close Note
View Note

  1. If the vehicle is involved in a moderate to severe collision, notification of the call to 911 is made via audio and screen display. To cancel the call, press or hang-up button within 10 seconds.

  2. If or hang-up button is not pressed within 10 seconds, the call is made to 911 automatically.

Receiving an Incoming Call

When an incoming call is received, the incoming call notification screen is displayed. The “Incoming Call Notifications” setting must be on.

Refer to Communication Settings (Search).

To accept the call, press the pick-up button on the audio control switch or select on the screen.

To reject the call, press the hang-up button on the audio control switch or select on the screen.

The following icons are displayed on the screen during a call. Icons which can be used differ depending on use conditions.

Icon

Function

Displays the Communication menu.

Ends the call.

Transferring a call from hands-free to a mobile phone

Communication between the Bluetooth® unit and a device (mobile phone) is canceled, and an incoming call will be received by the device (mobile phone) like a standard call.

Transferring a call from a device (mobile phone) to hands-free

Communication between devices (mobile phone) can be switched to Bluetooth® Hands-Free.

Mute

The microphone can be muted during a call.

When selected again, the mute is canceled.

To make a 3-way call, select the contacts from the following:

: Call History is displayed.

: The phonebook is displayed.

: The dial pad is displayed. Input the phone number.

The device may be unusable depending on the contractual content.

The call on hold is made to make a 3-way call.

The device may be unusable depending on the contractual content.

Switches the call on hold.

DTMF (Dual Tone Multi-Frequency Signal) Transmission

This function is used when transmitting DTMF via the dial pad. The receiver of a DTMF transmission is generally a home telephone answering machine or a company's automated guidance call center.

Input the number using a dial pad.

 

  • If the ignition is switched off during a hands-free call, the line is transferred to the device (Mobile phone) automatically.

  • If the DTMF code has two or more digits or symbols, each one must be transmitted individually.

Close Note
View Note

Call Interrupt

A call can be interrupted to receive an incoming call from a third party.

When is selected or the pick-up button on the steering wheel is pressed, the current call is held and the system switches to the new incoming call.

When is selected, the current call is ended and the system switches to the new incoming call (GSM network only).

When is selected or the hang-up button on the steering wheel is pressed, an incoming call is refused.

 

  • The function may not be available depending on the contractual content of the mobile device.

  • The function may not be operable depending on the type of the telephone network and the mobile device.

Close Note
View Note

Receiving and Replying to Messages (available only with E-mail/SMS compatible phones)

SMS (Short Message Service) messages, and E-mail received by connected devices can be downloaded, displayed, and played (read by the system).

Additionally, replies can also be made to calls and messages in the received messages.

Downloading messages

Up to 20 new messages can be downloaded and displayed from a connected device.

 

For E-mail, 20 messages for each account can be downloaded.

Close Note
View Note

(Automatic downloading)

The “Auto Download Email” (E-mail) or “Auto Download Text Message” (SMS) setting must be on. A message is downloaded automatically when the Bluetooth® unit is connected to the device.

Refer to Communication Settings (Search).

(Manually downloading)

When the “Auto Download Email” (E-mail) or “Auto Download Text Message” (SMS) setting is off, the message is downloaded using the following procedure.

  1. Select the icon on the home screen to display the Communication screen.

  2. Select or to display the Inbox.

  3. Select .

  4. Download will be started from the mobile phone.

 

  • Attached data is not downloaded.

  • Messages up to 1 kilobyte (E-mail)/140-bytes (SMS) can be downloaded.

  • A message list is created for each device.

  • If the connected device does not correspond to MAP 1.0, the AT command is used to download. The downloaded message indicates that it is already read.

  • Downloading using the AT command may not function depending on the connected device.

  • If an iPhone is connected, the following functions cannot be used.

    • Downloading past messages

    • Replying to messages

  • iPhone is a trademark of Apple Inc., registered in the U.S. and other countries.

Close Note
View Note

Receiving messages

(Method 1)

When a device receives a message, a message received notification is displayed. The “Email Notifications” (E-mail) or “Text Notifications” (SMS) setting must be on.

Refer to Communication Settings (Search).

Select and display the message.

(Method 2)

  1. Select the icon on the home screen to display the Communication screen.

  2. Select and display the new message list for E-mail and SMS.

  3. Select the message you would like to display.

 

The following icons are displayed in the lower part of the details on the message. Icons which can be used differ depending on use conditions.

Icon

Function

Displays the Communication menu.

Displays the inbox.

Plays back a message.

When selected again, playback is temporarily stopped.

Displays the previous message.

Displays the next message.

Only replies to the sender of the currently displayed message.

Select the sentence on the displayed reply screen and select the sentence for sending from the preset message.

Select .

(Only E-mail)

Replies to all members including CC.

Select the sentence on the displayed reply screen and select the sentence for sending from the preset message.

Select .

Makes a call to a person who sent a message.

For E-mail, this function may not work depending on the device.

Deletes a message.

The messages stored in a device is also deleted.

 

Up to three preset messages can be selected.

Close Note
View Note

Example of use (verify unread E-mail)

  1. Select the icon on the home screen to display the Communication screen.

  2. Select to display the inbox.

     

  3. Select the unread message displayed in bold.

  4. The details of the message are displayed and replying to the message, making a call, or playback can be performed.

Changing account for displaying (E-mail only)

  1. Select .

  2. Select the account which you would like to display. Only the messages for the selected account are displayed in the inbox.

Editing preset messages

  1. Select the icon on the home screen to display the Communication screen.

  2. Select .

  3. Select .

  4. Select the preset message which you would like to edit. The keyboard screen is displayed.

  5. When the message is input and is selected, the message is stored as a preset message.

 

  • Select the icon to change the language.

  • Select the icon to switch between capitalized and lower-case characters.

  • Select the icon to return to the previous screen without storing the edit.

Close Note
View Note

Page top