Instrument Cluster and Display
Instrument Cluster (Type A)
Maintenance Monitor (Except SKYACTIV-D 2.2)
Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) Display
Displays the system status.
Refer to Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) (Search).
Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) Display (Some Models)
Displays the currently set system status.
Refer to Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) (Search).
Odometer, Trip Meter and Trip Meter Selector
The odometer is constantly displayed on the screen when the ignition is switched ON, and the TRIP A or TRIP B screen can be displayed by operating the INFO switch.
Odometer
The odometer records the total distance the vehicle has been driven.
Trip meter
The driving distance for a specified interval is indicated. Two types (TRIP A, TRIP B) of interval distance and the average fuel economy for each can be measured.
For instance, trip meter A can record the distance from the point of origin, and trip meter B can record the distance from where the fuel tank is filled.
When trip meter A is selected, TRIP A will be displayed. When trip meter B is selected, TRIP B will be displayed.
The trip meter and average fuel economy can be reset by pressing the INFO switch for 1.5 seconds or more while in each mode.
-
Only the trip meters record tenths of kilometers (miles).
-
The trip record will be erased when:
-
The power supply is interrupted (blown fuse or the battery is disconnected).
-
The vehicle is driven over 9999.9 km (mile).
-
Outside Temperature Display
When the ignition is switched ON, the outside temperature is displayed.
-
Under the following conditions, the outside temperature display may differ from the actual outside temperature depending on the surroundings and vehicle conditions:
-
Significantly cold or hot temperatures.
-
Sudden changes in outside temperature.
-
The vehicle is parked.
-
The vehicle is driven at low speeds.
-
Changing the Temperature Unit of the Outside Temperature Display
The outside temperature unit can be switched between Celsius and Fahrenheit.
Settings can be changed by operating the center display screen.
Refer to the Settings section in the Mazda Connect Owner's Manual.
When the temperature unit indicated in the outside temperature display is changed, the temperature unit indicated in the engine coolant gauge display changes in conjunction with it.
Warning/Indicator Lights
Instrument Cluster varies depending on model and specifications.
Indication/Indicator Lights
These lights turn on or flash to notify the user of the system operation status or a system malfunction.
|
Signal |
Indicator |
Page |
|---|---|---|
 (Green) |
Seat Belt Indicator Light (Rear seat) |
(Search) |
 |
Front Passenger Air Bag Deactivation Indicator Light*1 (Some Models) |
(Search) |
 |
Security Indicator Light*1 |
(Search) |
 |
Wrench Indication |
(Search) |
 (Blue) |
Low Engine Coolant Temperature Indicator Light |
(Search) |
 |
Glow Indicator Light*1 (Some Models) |
(Search) |
 |
Diesel Particulate Filter Indication (Some Models) |
(Search) |
 |
Shift Position Indication |
(Search) |
 |
Lights-On Indication/Indicator Light |
(Search) |
 |
Headlight High-Beam Indicator Light |
Headlight High-Low Beam (Search) |
|
Flashing the Headlights (Search) |
||
 |
Turn Signal/Hazard Warning Indicator Lights |
Turn and Lane-Change Signals (Search) |
|
Hazard Warning Flasher (Search) |
||
 |
AUTOHOLD Active Indicator Light*1 |
(Search) |
|
Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) indicator Light (Some Models) |
(Search) | |
 |
TCS/DSC Indicator Light*1 |
Traction Control System (TCS) (Search) |
|
Dynamic Stability Control (DSC) (Search) |
||
|
Turns on (Search) |
||
 |
TCS OFF Indicator Light*1 (Some Models) |
(Search) |
 |
Off-Road Traction Assist Indicator Light*1 (Some Models) |
(Search) |
 |
Select Mode Indication |
(Search) |
 (Green) |
High Beam Control System (HBC) Indicator Light |
(Search) |
 |
Blind Spot Monitoring (BSM) OFF Indicator Light*1 |
Malfunction (Search) |
|
Except malfunction (Search) |
||
 (White) |
Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) Main Indication (Some Models) |
(Search) |
 (Green) |
Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) Set Indication (Some Models) |
(Search) |
 |
Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) Indication (Some Models) |
(Search) |
 |
Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) OFF Indicator Light*1 (Some Models) |
(Search) |
 |
Smart City Brake Support (SCBS) Indication (Some Models) |
Advanced Smart City Brake Support (Advanced SCBS) (Search) |
|
Smart City Brake Support (SCBS) (Search) |
||
 |
Smart Brake Support/Smart City Brake Support (SBS/SCBS) OFF Indicator Light*1 (Some Models) |
Advanced Smart City Brake Support (Advanced SCBS) (Search) |
|
Smart City Brake Support (SCBS) (Search) |
||
|
Smart Brake Support (SBS) System (Search) |
||
 (White) |
Cruise Main Indication (Some Models) |
(Search) |
 (Green) |
Cruise Set Indication (Some Models) |
(Search) |
-
The light turns on when the ignition is switched on for an operation check, and turns off a few seconds later or when the engine is started. If the light does not turn on or remains turned on, have the vehicle inspected at an Authorized Mazda Dealer.
