Instrument Cluster and Display

Speedometer

The speedometer indicates the speed of the vehicle.

Power Meter

Indicates the discharge/charge status.

The higher the amount of charge while the EV system is regenerating power, the more the power meter needle is in the CHARGE zone. The higher the amount of discharge while discharging, such as the accelerator pedal is depressed, the more the power meter needle is in the POWER zone.

  1. CHARGE zone

  2. POWER zone

The CHARGE indicators indicate the electrical power which can be generated by regenerative braking, and the POWER indicators indicate the motor output status.

  1. CHARGE indicators

  2. POWER indicators

The CHARGE indicators turns off in stages when the power generated by regenerative braking cannot charge the high voltage battery. The POWER indicators turn off in stages when the motor output is restricted.

High Voltage Battery Power Gauge

The remaining power of the high voltage battery is indicated when the power switch is switched ON.

When the high voltage battery is fully charged, F is indicated. As the level lowers, the needle approaches E. When the high voltage battery charge decreases to 1/4 or lower, we recommend charging the battery.

 

  1. F (Fully charged)

  2. 1/4 charged

  3. E (Fully discharged)

 

When the remaining charge of the high voltage battery is low, output may be restricted. If the output is restricted, charge the battery as soon as possible.

 


  • After charging, it may require some time for the needle to stabilize.

  • The arrow indicates that the charging port is on the right side.

Distance to full discharge

The remaining distance to full discharge is calculated and displayed based on the current, remaining charge of the high voltage battery and the energy efficiency.

 

 


  • The indicated remaining distance-to-full discharge is an estimate. The remaining distance-to-full discharge differs depending on conditions such as the driving conditions, surrounding environment, and the climate control system use. Also, if the needle in the remaining charge level gauge for the high voltage battery is near 0 or a message is displayed on the multi-information display, charge the battery as soon as possible even if the numerical value for the remaining distance-to-full discharge is of a sufficient level.

  • If there is no past energy efficiency information, such as after first purchasing your vehicle or the information was deleted when disconnecting the lead-acid battery terminal, the actual remaining distance to full discharge range may differ from the charge level indicated.

Indication/Indicator Lights

These lights turn on or flash to notify the user of the system operation status or a system malfunction.

Signal

Indicator

Refer to

(Green)

Seat Belt Indicator Light (Rear seat)

(Search)

Front Passenger Air Bag Deactivation Indicator Light

(Search)

Security Indicator Light

Immobilizer System

(Search)

Malfunction

(Search)

(Green)

KEY Indicator Light

(Search)

Wrench Indication/Indicator Light*1

(Search)

Shift Position Indication

(Search)

Lights-On Indicator Light

(Search)

Headlight High-Beam Indicator Light

Headlight High-Low Beam

(Search)

Flashing the Headlights

(Search)

Turn Signal/Hazard Warning Indicator Lights

Turn and Lane-Change Signals

(Search)

Hazard Warning Flasher

(Search)

Electric Parking Brake (EPB) Indication/Indicator Light*1*2

(Search)

AUTOHOLD Active Indicator Light*1

(Search)

Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) indicator Light (Some Models)

(Search)

Traffic Jam Assist (TJA) Indicator Light (Some Models)

(Search)

TCS/DSC Indication/Indicator Light*1

Traction Control System (TCS)

(Search)

Dynamic Stability Control (DSC)

(Search)

Turns on

(Search)

READY Indication

(Search)

TCS OFF Indicator Light*1

(Search)

(White)

i-ACTIVSENSE Status Symbol (Warning/Risk Avoidance Support System)

(Search)

(Green)

(Amber)

i-ACTIVSENSE OFF Symbol (Warning/Risk Avoidance Support System)

(Search)

(Green)

High Beam Control System (HBC) Indicator Light (Some Models)

(Search)

(White)

Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) Standby Indication (Some Models)

(Search)

Traffic Jam Assist (TJA) Standby Indication (Some Models)

(Search)

(Green)

Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) Set Indication (Some Models)

(Search)

Traffic Jam Assist (TJA) Set Indication (Some Models)

(Search)

Smart Brake Support (SBS) OFF Indicator Light*1 (Some Models)

(Search)

Emergency Lane Keeping (ELK) OFF Indicator Light*1 (Some Models)

(Search)

(White)

Cruise Standby Indication (Some Models)

(Search)

(Green)

Cruise Set Indication (Some Models)

(Search)
  1. The light turns on when the power switch is switched ON for an operation check, and turns off a few seconds later or when the EV system is started. If the light does not turn on or remains on, have the vehicle inspected by an Authorized Mazda Dealer.

  2. The light turns on continuously when the parking brake is applied.

Active Driving Display

Page top