Instrument Cluster and Display

Instrument Cluster

Instrument Cluster

Speedometer

The speedometer indicates the speed of the vehicle.

High Voltage Battery Temperature Gauge

Displays the high voltage battery temperature. The blue range of the gauge indicates that the high voltage battery temperature is low and the red range indicates that it is high and overheating.

 

 

When the high voltage battery temperature is high or low, the output may be restricted to protect the EV system.

Close Note
View Note

High Voltage Battery Power Gauge

The remaining power of the high voltage battery is indicated when the power switch is switched ON.

When the high voltage battery is fully charged, F is indicated. As the level lowers, the needle approaches E. When the high voltage battery charge decreases to 1/4 or lower, we recommend charging the battery.

 

  1. F (Fully charged)

  2. 1/4 charged

  3. E (Fully discharged)

 

When the remaining charge of the high voltage battery is low, output may be restricted. If the output is restricted, charge the battery as soon as possible.

 

  • After charging, it may require some time for the needle to stabilize.

  • The arrow indicates that the charging port is on the right side.

Close Note
View Note

Remaining High Voltage Battery Power Indication

The remaining amount of power in the high voltage battery is indicated by a percentage.

 

 

Average Energy Efficiency

The average energy efficiency is calculated every 30 seconds from the total traveled distance and the total electrical power consumption since the vehicle was purchased or the past data was reset, and the rate is displayed.

The average energy efficiency is also indicated by a red arrow on the instantaneous energy efficiency gauge.

 

 

 

To reset the displayed average energy efficiency data, press the INFO switch for 1.5 seconds or longer. After resetting the data, - - - kWh/100 km (- - - mile/kWh) is displayed before the average energy efficiency is recalculated and displayed.

Instantaneous Energy Efficiency

The instantaneous energy efficiency while driving the vehicle is calculated from the electrical power consumption and displayed.

 

 

 

  • Indicates the 0 position when the vehicle speed is about 5 km/h (3 mph) or slower.

  • The red arrow on the scale indicates the average energy efficiency.

Close Note
View Note

i-ACTIVSENSE Display (Some Models)

Displays the system status.

 

  • Refer to Lane Departure Warning System (LDWS) (Search).

  • Refer to Blind Spot Monitoring (BSM) (Search).

  • Refer to Traffic Sign Recognition System (TSR) (Search).

  • Refer to Distance & Speed Alert (DSA) (Search).

  • Refer to Driver Attention Alert (DAA) (Search).

  • Refer to Driver Monitoring (DM) (Search).

  • Refer to Front Cross Traffic Alert (FCTA) (Search).

  • Refer to Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) (Search).

  • Refer to Traffic Jam Assist (TJA) (Search).

  • Refer to Lane-keep Assist System (LAS) (Search).

  • Refer to Emergency Lane Keeping (ELK) (Search).

  • Refer to Smart Brake Support (SBS) (Search).

  • Refer to Cruise Control (Search).

Compass Display

The direction the vehicle is moving is displayed in one of eight directions while the vehicle is being driven.

 

Display

Direction

N

North

S

South

E

East

W

West

NE

Northeast

NW

Northwest

SE

Southeast

SW

Southwest

Message Display

A message such as the system operation status, a malfunction, or an abnormality is indicated.

Warning/indicator light in instrument cluster turns on/flashes or symbol is indicated on display at same time as message

Check the information regarding the warning/indicator light or indicated symbol.

Refer to If a Warning Indication/Warning Lights (Search).

Refer to If a Indication/Indicator Lights (Search).

Message only is indicated on display

Follow the instructions indicated on the display. For the display content, refer to the next page.

Refer to If a Message Indicated on Multi-information Display (Search).

Wrench Indication/Indicator Light

The wrench indication/indicator light is displayed/turns on under the following conditions.

  • When the preset maintenance period has arrived.

    Refer to the Information section in the Mazda Connect Owner's Manual.

     

    • When the maintenance period arrives, have your vehicle inspected by an Authorized Mazda Dealer as soon as possible. If maintenance is neglected, a decrease in vehicle performance may occur which could cause damage. Have your vehicle inspected before the maintenance period arrives.

    Close Caution
    View Caution

Page top