Setting change method

1. Select on the home screen and display the setting screen.

2. Switch the tab to [Vehicle] and select the setting item you want to change.

1. If the auto-wiper control is set to Off, the wiper lever position is set to intermittent operation.

2. If the setting is changed to Off, the following operation is performed according to the headlight switch position:

   • At position: Headlights turn off immediately after the ignition is switched off.

   • At any position other than : Headlights on/off conditions vary according to the headlight switch position.

3. When set to Off, the lights-on reminder is operable.

4. Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda recommends that these systems remain On.

5. The lights-on reminder settings can be changed at anytime, however, the lights-on reminder only operates when the auto headlight function is set to Off.

6. Change the ambient light illumination level with the parking lights or headlights turned on.

Door locks

Method for changing the auto lock/unlock functions using the door-lock switch

 

1. Other settings for the auto door lock function are available at an Authorized Mazda Dealer. For details consult an Authorized Mazda Dealer

1. Safely park the vehicle. All doors must remain closed.

2. Switch the ignition ON.

3. Press and hold the lock side of the driver's door-lock switch within 20 seconds of switching the ignition ON, and make sure a beep sound is heard about eight seconds afterwards.

4. Refer to the auto lock/unlock function setting table, determine the function number for the desired setting. Press the unlock side of the driver's door-lock switch the same number of times as the selected function number (Ex. If you select function 2, press the unlock side of the switch only 2 times).

5. Three seconds after the function setting has been changed, a beep sound will beep in the amount of the selected function number. (Ex. Function number 3 = 3 beep sounds)

(Manual transaxle vehicles)

(Automatic transaxle vehicles)

Method for changing functions using the center display

1. Select on the home screen and display the setting screen.

2. Switch the tab to [Vehicle] and select the setting item you want to change.

 

 

Keyless entry system

Method for changing the unlock functions using the key

1. Switch the ignition off and close all of the doors and the trunk lid.

2. Open the driver's door.

3. Within 30 seconds of opening the driver's door, press and hold the UNLOCK button on the key for 5 seconds or longer (the sound of the doors locking/unlocking can be heard). After this, the system switches the setting of pressing the driver's request switch once or twice to unlock all doors each time the UNLOCK button is pressed (the sound of the doors locking/unlocking can be heard).

4. The setting change is completed by doing any one of the following:

   • Switching the ignition to ACC or ON.

   • Closing the driver's door.

   • Opening the trunk lid.

   • Not operating the key for ten seconds.

   • Pressing any button except the UNLOCK button on the key.

   • Pressing a request switch.

Method for changing functions using the center display

1. Select on the home screen and display the setting screen.

2. Switch the tab to [Vehicle] and select the setting item you want to change.

 

Advanced keyless entry system

Method for changing the unlock functions using the key

1. Switch the ignition off and close all of the doors and the trunk lid.

2. Open the driver's door.

3. Within 30 seconds of opening the driver's door, press and hold the UNLOCK button on the key for 5 seconds or longer (the sound of the doors locking/unlocking can be heard).

   After this, the system switches the setting of pressing the driver's request switch once or twice to unlock all doors each time the UNLOCK button is pressed (the sound of the doors locking/unlocking can be heard).

4. The setting change is completed by doing any one of the following:

   • Switching the ignition to ACC or ON.

   • Closing the driver's door.

   • Opening the trunk lid.

   • Not operating the key for ten seconds.

   • Pressing any button except the UNLOCK button on the key.

   • Pressing a request switch.

How to change the volume of the door lock/unlock beep sound

1. Switch the ignition off and close all of the doors and the trunk lid.

2. Open the driver's door.

3. Within 30 seconds of opening the driver's door, press and hold the LOCK button on the key for 5 seconds or longer. (All of the doors and the liftgate are locked and unlocked when the LOCK button on the key is pressed and held for 5 seconds.)

   The beep sound activates at the currently set volume. The setting changes each time the LOCK button on the key is pressed and the beep sound activates at the set volume. (If the beep sound has been set to not activate, it will not activate.)

4. The setting change is completed by doing any one of the following:

   • Switching the ignition to ACC or ON.

   • Closing the driver's door.

   • Opening the trunk lid.

   • Not operating the key for ten seconds.

   • Pressing any button except the LOCK button on the key.

   • Pressing a request switch.

Method for changing functions using the center display

1. Select on the home screen and display the setting screen.

2. Switch the tab to [Vehicle] and select the setting item you want to change.

Active Driving Display

Method for changing functions using the center display

1. Select on the home screen and display the setting screen.

2. Switch the tab to [AD-Disp] and select the setting item you want to change.

 

Fuel Economy Monitor

Method for changing functions using the center display

1. Select on the home screen to display the application screen.

2. Select the [Fuel Economy Monitor].

3. Select to display the Menu screen.

4. Select on the screen and select the setting item you want to change.

 

Display

Method for changing functions using the center display

1. Select on the home screen and display the setting screen.

2. Switch the tab to [Display] and select the setting item you want to change.

Turn Display Off

When you select , the display turns off.

Turn Display Off and Show Clock

When you select , the screen turns off and the clock is displayed.

Auto/Day/Night

:

(With auto-light control)

Switches screen automatically according to parking lights illumination condition. However, when the light sensor detects that the surrounding area is bright such as when the parking lights are turned on in the daytime, the screen is switched to the daytime screen^*1

(Without auto-light control)

Switches screen automatically according to parking lights illumination condition.^*1

: Daytime screen setting

: Nighttime screen setting

1. The display is constantly on daytime screen when the illumination dimmer is cancelled.

 

Sound quality

Method for changing functions using the center display

1. Select on the home screen and display the setting screen.

2. Switch the tab to [Sound] and select the setting item you want to change.

1. Standard audio

2. Bose sound system

ALC (Automatic volume adjustment)

The automatic level control (ALC) is a feature that automatically adjusts audio volume according to the vehicle speed. The volume increases in accordance with the increase in vehicle speed, and decreases as vehicle speed decreases.

Bose Centerpoint (Surround technology)

Centerpoint^*1 lets vehicle owners enjoy a Bose surround sound experience.

Specifically engineered to meet the unique demands of reproducing surround sound in a vehicle.

Converts stereo signals to multiple channels allowing greater precision when reproducing the sound.

An enhanced algorithm to simultaneously create a wider, more spacious sound field.

Bose AudioPilot (Noise compensation technology)

When driving, background noise can interfere with enjoying music.

AudioPilot noise compensation technology continuously adjusts the music to compensate for background noise and vehicle speed.

It reacts only to sustained noise sources and not intermittent ones, such as speed bumps.

An enhanced DSP algorithm allows faster and more effective compensation for unusual situations, such as driving on a very rough road or at high speeds.

1. Centerpoint is a registered trademark of Bose Corporation.

 

Clock

Method for changing functions using the center display

1. Select on the home screen and display the setting screen.

2. Switch the tab to [Clock] and select the setting item you want to change.

 

Devices

Method for changing functions using the center display

1. Select on the home screen and display the setting screen.

2. Switch the tab to [Devices] and select the setting item you want to change.

 

Bluetooth^®

Device pairing

To use Bluetooth^® audio and Hands-Free, the device equipped with Bluetooth^® has to be paired to the unit using the following procedure. A maximum of 7 devices including Bluetooth^® audio devices and hands-free mobile phones can be paired.

(Pairing Procedure)

1. Select the icon on the home screen to display the Settings screen.

2. Select the tab.

3. Select .

4. Turn the Bluetooth^® setting on.

5. Select to display the message and switch to the device operation.

6. Using your device, perform a search for the Bluetooth^® device (Peripheral device).

7. Select “Mazda” from the device list searched by the device.

8. (Device with Bluetooth^® version 2.0)

   Input the displayed 4-digit pairing code into the device.

   (Device with Bluetooth^® version 2.1 or higher)

   Make sure the displayed 6-digit code on the audio is also displayed on the device, and touch the .

   Connection permission and phonebook access permission for your mobile device may be required depending on the mobile device.

9. If pairing is successful, the functions of the device connected to Bluetooth^® are displayed.

10. (Devices compatible with Mazda E-mail / SMS function)

    SMS (Short Message Service) messages, and E-mail for the device are downloaded automatically. A download permission operation for your device may be required depending on the device.

After a device is registered, the system automatically identifies the device. By activating Bluetooth^® Hands-Free again, or by activating Bluetooth^® Hands-Free first after switching the ignition from OFF to ACC, the device connection condition is indicated in the center display.

IMPORTANT note about pairing and automatic reconnection:

• If pairing is redone on the same mobile phone device, first clear “Mazda” displayed on the Bluetooth^® setting screen of the mobile device.

• When the OS of the device is updated, the pairing information may be deleted. If this happens, reprogram the pairing information to the Bluetooth^® unit.

• Before you pair your device, make sure that Bluetooth^® is “ON”, both on your phone and on the vehicle.

 

Device selection

If several devices have been paired, the Bluetooth^® unit links the device last paired. If you would like to link a different paired device, it is necessary to change the link. The order of device priority after the link has been changed is maintained even when the ignition is switched off.

(Connecting other devices)

1. Select the icon on the home screen to display the Settings screen.

2. Select the tab.

3. Select .

4. Turn the Bluetooth^® setting on.

5. Select the name of the device you would like to connect.

6. selection

   Connects both devices as hands-free and Bluetooth^® audio.

   selection

   Connects as a hands-free device.

   selection

   Connects as Bluetooth^® audio.

(Disconnecting a device)

1. Select the icon on the home screen to display the Settings screen.

2. Select the tab.

3. Select .

4. Turn the Bluetooth^® setting on.

5. Select the device name which is currently connected.

6. Select .

 

Deleting a device

(Selecting and deleting devices)

1. Select the icon on the home screen to display the Settings screen.

2. Select the tab.

3. Select .

4. Turn the Bluetooth^® setting on.

5. Select the device name which you would like to delete.

6. Select .

7. Select .

(Deleting all devices)

1. Select the icon on the home screen to display the Settings screen.

2. Select the tab.

3. Select .

4. Select .

5. Select .

6. Select .

 

Changing PIN code

PIN code (4 digits) can be changed.

1. Select the icon on the home screen to display the Settings screen.

2. Select the tab.

3. Select .

4. Select .

5. Select .

6. Input the new PIN code to be set.

7. Select .

 

Android Auto™/Apple CarPlay™

 

Each system

Method for changing functions using the center display

1. Select on the home screen and display the setting screen.

2. Switch the tab to [System] and select the setting item you want to change.

1. Available only in display from the center display.

 

Daytime running lights

If you want to change the daytime running lights setting, please consult an Authorized Mazda Dealer.

 

Rear window defogger

If you want to change the rear window defogger setting, please consult an Authorized Mazda Dealer.

1. The operation may stop in 15 minutes due to the effect of the outside temperature even if the operation time of the rear window defogger has been changed to Continuous.