Instrument Cluster and Display
Instrument Cluster (Type A)
Engine Coolant Temperature Gauge
Displays the engine coolant temperature. The blue gauge indicates that the engine coolant temperature is low, and the red gauge indicates that the engine coolant temperature is high and overheating.
If the engine coolant temperature gauge needle is in the red range, there is the possibility of overheating. Drive slowly to reduce engine load until you can find a safe place to stop the vehicle and wait for the engine to cool down.
Refer to Overheating (Search).
-
If the engine coolant temperature is high or the engine is hot, the engine output may be limited.
-
During normal driving, the engine coolant temperature stabilizes at 100 °C (210 °F) or less, and the gauge indicates a range lower than 100 °C (210 °F).
Fuel Gauge
The fuel gauge shows approximately how much fuel is remaining in the tank when the ignition is switched ON. We recommend keeping the tank over 1/4 full.
If the low fuel warning light illuminates or the fuel level is very low, refuel as soon as possible.
Refer to Taking Action (Search).
-
After refueling, it may require some time for the indicator to stabilize. In addition, the indicator may deviate while driving on a slope or curve since the fuel moves in the tank.
-
The direction of the arrow (
) indicates that the fuel-filler lid is on the left side of the vehicle.
Warning/Indicator Lights
Instrument Cluster varies depending on model and specifications.
Indication/Indicator Lights
These lights turn on or flash to notify the user of the system operation status or a system malfunction.
|
Signal |
Indicator |
Page |
|---|---|---|
 (Green) |
Seat Belt Indicator Light (Rear seat) (Some Models) |
(Search) |
 |
Front Passenger Air Bag Deactivation Indicator Light*1 |
(Search) |
 |
Security Indicator Light*1 |
(Search) |
 |
Wrench Indication |
(Search) |
 |
Shift Position Indication |
(Search) |
 |
Lights-On Indication/Indicator Light |
(Search) |
 |
Headlight High-Beam Indicator Light |
Headlight High-Low Beam (Search) |
|
Flashing the Headlights (Search) |
||
 |
Turn Signal/Hazard Warning Indicator Lights |
Turn and Lane-Change Signals (Search) |
|
Hazard Warning Flasher (Search) |
||
 |
Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) indicator Light*1 (Some Models) |
(Search) |
 |
TCS/DSC Indicator Light*1 |
Traction Control System (TCS) (Search) |
|
Dynamic Stability Control (DSC) (Search) |
||
|
Turns on (Search) |
||
 |
TCS OFF Indicator Light*1 |
(Search) |
 |
Select Mode Indication |
(Search) |
 (Green) |
High Beam Control System (HBC) Indicator Light |
(Search) |
 |
Blind Spot Monitoring (BSM) OFF Indicator Light*1 |
Malfunction (Search) |
|
Except malfunction (Search) |
||
 (White) |
Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) Main Indication (Some Models) |
(Search) |
 (Green) |
Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) Set Indication (Some Models) |
(Search) |
 |
Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) Indication |
(Search) |
 |
Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) OFF Indicator Light*1 (Some Models) |
(Search) |
 |
Smart City Brake Support (SCBS) Indication (Some Models) |
Advanced Smart City Brake Support (Advanced SCBS) (Search) |
|
Smart City Brake Support (SCBS) (Search) |
||
 |
Smart Brake Support/Smart City Brake Support (SBS/SCBS) OFF Indicator Light*1 (Some Models) |
Advanced Smart City Brake Support (Advanced SCBS) (Search) |
|
Smart City Brake Support (SCBS) (Search) |
||
|
Smart Brake Support (SBS) System (Search) |
||
 (White) |
Cruise Main Indication (Some Models) |
(Search) |
 (Green) |
Cruise Set Indication (Some Models) |
(Search) |
-
The light turns on when the ignition is switched on for an operation check, and turns off a few seconds later or when the engine is started. If the light does not turn on or remains turned on, have the vehicle inspected at an Authorized Mazda Dealer.
Speedometer
The speedometer indicates the speed of the vehicle.
Tachometer
The tachometer shows engine speed in thousands of revolutions per minute (rpm).
Do not run the engine with the tachometer needle in the RED ZONE.
This may cause severe engine damage.
When the tachometer needle enters the STRIPED ZONE, this indicates to the driver that the gears should be shifted before entering the RED ZONE.
Distance Recognition Support System (DRSS) Display (Some Models)
Displays the distance between your vehicle and the vehicle ahead.
Refer to Distance Recognition Support System (DRSS) (Search).
Warning (Display Indication)
Wrench Indicator Light
The wrench indication is displayed under the following conditions.
-
When the preset maintenance period has arrived.
Refer to Maintenance Monitor (Search).
-
When the engine oil replacement period has arrived.
-
The wrench indication may display earlier than the preset period depending on vehicle usage conditions.
-
Whenever the engine oil is replaced, a reset of the vehicle engine control unit necessary.
Your Authorized Mazda Dealer will be able to reset the engine control unit or see (Search) for the Vehicle engine control unit reset procedure.
Low Engine Coolant Temperature Indicator Light (Blue)
The light illuminates continuously when the engine coolant temperature is low and turns off after the engine is warm.
Speedometer
The speedometer indicates the speed of the vehicle.
