Front Seats

Warnings and Cautions for Using the Driving Position Memory

Warnings and Cautions for Using the Driving Position Memory

 

Do not place hand, fingers, or feet around the bottom of the seat while the seat memory function is operating. The seat moves automatically while the seat memory function is operating and hand, fingers, or feet could get pinched and injured.

Close Caution
View Caution
How to Use the Driving Position Memory

How to Use the Driving Position Memory

A driving position can be programmed to the position memory switch and the key.

Programming

  1. Switch the vehicle power ON.

  2. Adjust the following driving positions to the desired positions.

    • Driver's seat

    • Active driving display

    • Outside mirrors

  3. Continue pressing the SET switch until a sound is activated.

  4. Do the following operation within 5 seconds after the sound is activated to program the driving position.

    • Programming to a position memory button

      Press the button you want to program, either 1 or 2 button.

    • Programming to the transmitter

      Press the unlock button on the transmitter.

    A sound is activated when the operation is completed correctly.

Adjusting to the Programmed Driving Position

Operation Using the Position Memory Switch

Press either switch 1 or 2 that you programmed to activate the seat adjustment to your position.

A sound is activated when the adjustment to the programmed driving position is completed.

Operation Using the Key

  1. Unlock the driver's door using one of the following methods.

    • Touch the sensing area of the door release touch sensor.

    • Press the key unlock button.

  2. If the driver's door is opened within a certain period of time after unlocking, adjustment of the next driving position starts.

    • Driver's seat

    • Active driving display

    • Outside mirrors

    A sound is activated when the adjustment to the programmed driving position is completed.

Deleting a Programmed Position

Erasing the Position Stored in the Position Memory Switch

Program a new driving position.

Deleting a Position Programmed to the Key

  1. Switch the vehicle power OFF.

  2. Continue pressing the SET switch until a sound is activated.

  3. Press the key lock button within 5 seconds after the sound is activated.

 

  • If the angle of the outer mirror is adjusted close to the limits of its range of motion, the angle of the outer mirrors may not be programmed correctly.

  • When the adjustment to the programmed driving position has been completed, a sound is not activated.

  • Under the following conditions, the driving position adjustment is canceled.

    • The seat adjustment switch/SET switch/outer mirrors/active driving display for the driver's seat is operated to adjust the position.

    • The key lock button or unlock button is operated.

    • The vehicle moves.

    • The selector lever is shifted to a position other than P.

Close Note
View Note

Page top