Instrument Cluster
Instrument Cluster
-
Tachometer
-
Multi-information Display
-
Engine Coolant Temperature Gauge
-
Fuel Gauge
-
Dashboard Illumination Switch
-
Speedometer
-
TRIP Switch
Engine Coolant Temperature Gauge
Displays the engine coolant temperature. The blue range of the gauge indicates that the engine coolant temperature is low, and the red range of the gauge indicates that the engine coolant temperature is high and overheating.
If the engine coolant temperature gauge needle is in the red range, there is the possibility of overheating. Drive slowly to reduce engine load.
Refer to Taking Action with Overheating (Search).
How to Use the Dashboard Illumination
Brightening the dashboard illumination
Dimming the dashboard illumination
If you press the - switch again while the dashboard illumination is at maximum dimness, a sound is activated to notify you that the dimmer setting is at maximum dimness.
Function for canceling illumination dimmer
The illumination dimmer can be canceled by pressing the + switch while the instrument cluster is at maximum dimness and while the vehicle power is switched ON. If you press the + switch again while the illumination dimmer is canceled, a sound is activated to notify you that it is canceled. If the instrument cluster's visibility is reduced due to glare from surrounding brightness, cancel the illumination dimmer.
Average Fuel Economy Display
This mode displays the average fuel economy by calculating the total traveled distance and the total fuel consumption since the vehicle was purchased or the past data was reset. The average fuel economy is calculated and displayed every 30 seconds.
How to Use the Average Fuel Economy Display
To reset the displayed average fuel economy data, press the INFO switch for 2 seconds or longer.
After resetting the data, - - - L/100 km (- - - mpg) is displayed until the average fuel economy is recalculated and displayed.
i-ACTIVSENSE Display (Some Models)
Displays the system status.
Message Display
Displays a message to notify the user of the system operation status and malfunctions or abnormalities.
Follow the instructions indicated on the display.
Refer to How to Use the Multi-information Display (Search).
