Fully Automatic Climate Control System
Air Vents
The location and the direction airflow exits the air vents changes depending on the air vent adjustment.
Fully Automatic Climate Control System
The following functions are automatically controlled according to the set temperature.
-
Airflow temperature control
-
Airflow amount control
-
Airflow mode switching
-
Recirculate/fresh air mode switching
-
Air conditioning (cooling/dehumidifying functions) on/off
-
Seat warmer level selection (Some Models)
-
Heated steering wheel operation (Some Models)
To prevent cold airflow immediately after heating starts when the engine is cold, the airflow amount is decreased.
Fully automatic air-conditioning uses the sunlight and interior temperature sensors to control the temperature in the cabin by measuring interior and exterior temperatures, humidity, and sunlight. Do not cover the sunlight/interior temperature sensor.
Sunlight sensor
Interior temperature sensor
How to Use the Fully Automatic Climate Control System
-
Start the engine.
The AUTO switch indicator light turns on.
-
Turn the temperature control dial to set the desired temperature.
Each function is automatically controlled according to the set temperature.
-
To stop the operation, press the climate control system power switch.
-
The recommended set temperature is 22 ℃ (72 ℉).
-
If any mode selector switch, fan control switch, or windshield defroster switch is operated during auto operation, the AUTO switch indicator light turns off. The functions for switches other than those operated will continue to operate in auto control.
