Instrument Cluster
Instrument Cluster
-
Tachometer
-
Multi-information Display
-
Engine Coolant Temperature Gauge
-
Fuel Gauge
-
Dashboard Illumination Switch
-
Speedometer
-
TRIP Switch
How to Use the Multi-information Display
The screen content changes each time the INFO switch is pressed.
-
Basic display
-
Drive information display
-
i-ACTIVSENSE display
-
Message display*1
-
Displayed only when a warning occurs.
Odometer/Trip Meter
Odometer
The odometer records the total distance the vehicle has been driven.
Trip meter
The driving distance for a specified interval is indicated. Two types (TRIP A, TRIP B) of interval distance can be measured.
How to Use the Odometer/Trip Meter
The display changes each time the TRIP switch is pressed.
-
Odometer display
-
Trip meter A display
-
Trip meter B display
When returning the trip meter to “0”, press the TRIP switch for 2 seconds or longer while the trip meter is displayed.
If the lead-acid battery is disconnected for vehicle maintenance or other reasons, the trip meter display returns to “0”.
Dashboard Illumination
(Without auto-light control)
When the lights are turned on with the vehicle power switched ON, the brightness of the dashboard illumination is dimmed.
(With auto-light control)
When the lights are turned on with the vehicle power switched ON, the brightness of the dashboard illumination is dimmed. However, when the light sensor detects that the surrounding area is bright such as when the lights are turned on in the daytime, the dashboard illumination does not dim.
(With auto-light control)
When the vehicle power is switched ON in the early evening or at dusk, the dashboard illumination is dimmed for several seconds until the light sensor detects the brightness of the surrounding area, however, the dimming may cancel after the brightness is detected.
How to Use the Dashboard Illumination
Brightening the dashboard illumination
Dimming the dashboard illumination
If you press the - switch again while the dashboard illumination is at maximum dimness, a sound is activated to notify you that the dimmer setting is at maximum dimness.
Function for canceling illumination dimmer
The illumination dimmer can be canceled by pressing the + switch while the instrument cluster is at maximum dimness and while the vehicle power is switched ON. If you press the + switch again while the illumination dimmer is canceled, a sound is activated to notify you that it is canceled. If the instrument cluster's visibility is reduced due to glare from surrounding brightness, cancel the illumination dimmer.
Deceleration Regeneration Charge Display (e-SKYACTIV G)
This displays the status of the charging produced by deceleration regeneration.
i-ACTIVSENSE Display (Some Models)
Displays the system status.
Message Display
Displays a message to notify the user of the system operation status and malfunctions or abnormalities.
Follow the instructions indicated on the display.
Refer to How to Use the Multi-information Display (Search).
