Rear View Monitor

How to Use the Rear View Monitor

Displaying the rear view monitor

Shift the selector lever to the R position.

Images are displayed on the center display.

Viewing the screen

 


  • The images displayed on the center display are reversed left and right.

  • Screen brightness and contrast can be adjusted.

    Refer to the Settings section in the Mazda Connect Owner's Manual.

Type A

When the parking sensor is ON

When the parking sensor is OFF

Indication

Content

1

Projected vehicle path lines (yellow)

Indicates the approximate projected path of the vehicle.

The projected vehicle path lines move in conjunction with the steering wheel operation.

2

Vehicle width guide lines (blue)

Indicates the approximate width of the vehicle.

Does not display when the steering wheel is operated in a straight-ahead position.

3

Projected vehicle path distance guide lines (red/yellow)

These guide lines indicate the approximate distance to a point measured from the rear of the vehicle (from the end of the bumper).

  • The center point of the red line indicates the point about 50 cm (19 in) from the rear end of the rear bumper.

  • The center points of the yellow lines indicate the points about 1 m (39 in) and 2 m (78 in) from the rear end of the rear bumper.

4

Parking sensor status icon

Indicates that the parking sensor has a problem or it is switched off.

Type B

When the parking sensor is ON

When the parking sensor is OFF

Indication

Content

1

Vehicle width guide lines (yellow)

Indicates the approximate width of the vehicle.

2

Projected vehicle path distance guide lines (red/yellow)

These guide lines indicate the approximate distance to a point measured from the rear of the vehicle (from the end of the bumper).

  • The red line indicates the point about 50 cm (19 in) from the rear end of the rear bumper.

  • The yellow lines indicate the points about 1 m (39 in) and 2 m (78 in) from the rear end of the rear bumper.

3

Parking sensor status icon

Indicates that the parking sensor has a problem or it is switched off.

System problem indication

In the following cases, there might be a problem with the system. Have the vehicle inspected by an Authorized Mazda Dealer.

  • "No camera signal." is displayed on the center display.

  • The display on the center display does not switch to the camera image even if the selector lever is shifted to the R position.

  • A portion of the display on the center display is black.

Page top