Instrument Cluster

Instrument Cluster

  1. Tachometer

  2. Multi-information Display

  3. Engine Coolant Temperature Gauge

  4. Fuel Gauge

  5. Dashboard Illumination Switch

  6. Speedometer

  7. TRIP Switch

Speedometer

The speedometer indicates the speed of the vehicle.

How to Use the Odometer/Trip Meter

 

The display changes each time the TRIP switch is pressed.

  1. Odometer display

  2. Trip meter A display

  3. Trip meter B display

 

When returning the trip meter to “0”, press the TRIP switch for 2 seconds or longer while the trip meter is displayed.

 


If the lead-acid battery is disconnected for vehicle maintenance or other reasons, the trip meter display returns to “0”.

Engine Coolant Temperature Gauge

Displays the engine coolant temperature. The blue range of the gauge indicates that the engine coolant temperature is low, and the red range of the gauge indicates that the engine coolant temperature is high and overheating.

 

 


If the engine coolant temperature gauge needle is in the red range, there is the possibility of overheating. Drive slowly to reduce engine load.

Refer to Taking Action with Overheating (Search).

Outside Temperature Display

When the vehicle power is switched ON, the outside temperature is displayed.

 

 


The outside temperature display may differ from the actual outside temperature depending on the surroundings and vehicle conditions.

Average Fuel Economy Display

This mode displays the average fuel economy by calculating the total traveled distance and the total fuel consumption since the vehicle was purchased or the past data was reset. The average fuel economy is calculated and displayed every 30 seconds.

How to Use the Average Fuel Economy Display

To reset the displayed average fuel economy data, press the INFO switch for 2 seconds or longer.

After resetting the data, - - - L/100 km (- - - mpg) is displayed until the average fuel economy is recalculated and displayed.

Instantaneous Fuel Economy Display

This displays the current fuel economy by calculating the amount of fuel consumption and the distance traveled.

 

(e-SKYACTIV G)

 

(SKYACTIV-G)

 


  • Displays the 0 position when the vehicle speed decreases to a constant speed or slower.

  • The arrow on the scale indicates the average fuel economy.

Deceleration Regeneration Charge Display (e-SKYACTIV G)

This displays the status of the charging produced by deceleration regeneration.

i-ACTIVSENSE Display (Some Models)

Displays the system status.

 

Compass Display

The direction the vehicle is moving is displayed in one of eight directions while the vehicle is being driven.

 

Message Display

Displays a message to notify the user of the system operation status and malfunctions or abnormalities.

Follow the instructions indicated on the display.

Refer to How to Use the Multi-information Display (Search).

Page top