Warning/Indicator Light Turns On
Charging System Warning Light
The light turns on if the charging system has a problem.
Park the vehicle in a safe place immediately and contact an Authorized Mazda Dealer.
Do not continue driving with the charging system warning light turned on:
Otherwise, the engine may stop, which could result in an accident.
Engine Oil Warning Light
The light turns on when the engine oil pressure decreases.
Do not drive the vehicle with the engine oil warning light turned on. Driving the vehicle with decreased engine oil pressure may cause engine damage.
If the engine oil warning light turns on while driving, stop the vehicle in a safe place and stop the engine.
After that, contact an Authorized Mazda Dealer.
High Engine Coolant Temperature Warning Light
The light turns on if the engine coolant temperature has increased excessively.
Check the contents of the message displayed and take the necessary action.
Do not drive the vehicle with the high engine coolant temperature warning light turned on. Driving the vehicle with the engine not cooled down may cause engine damage.
ABS Warning Light
The light remains on if the system has a problem.
Have your vehicle inspected by an Authorized Mazda Dealer.
If the brake system warning light 
and the ABS warning light turn on at the same time, stop the vehicle in a safe place immediately and contact an Authorized Mazda Dealer.
The rear wheels could lock more quickly in an emergency stop than under normal circumstances which could result in an accident.
Automatic Transmission Warning Light
The light turns on if the system has a problem.
Contact an Authorized Mazda Dealer.
Do not drive the vehicle with the automatic transmission warning light turned on. If the vehicle continues to be driven while the automatic transmission warning light is turned on, the transmission could be damaged. Have your vehicle inspected by an Authorized Mazda Dealer as soon as possible.
AWD Warning Light (Some Models)
The light turns on if the system has a problem or if the tire sizes do not match.
Check the contents of the message displayed and take the necessary action.
Tire Pressure Monitoring System (TPMS) Warning Light (Flashing)
The light flashes if there is a malfunction in the system.
Contact an Authorized Mazda Dealer.
Do not drive the vehicle at high speeds if the TPMS warning light turns on or flashes:
Driving the vehicle at high speeds while the TPMS warning light is turned on or flashing is dangerous because the brake performance and the steering wheel operability will be reduced. If the vehicle is driven at high speeds or the brakes are suddenly applied, it could lead to an accident. Gradually apply the brakes to lower the vehicle's speed.
Do not ignore the TPMS warning light when it is turned on or flashing:
Continuing to drive the vehicle while ignoring the illumination/flashing of the TPMS warning light is dangerous because a tire may burst which could lead to an accident. Take appropriate measures as soon as possible.
TCS/DSC Indicator Light (Turns on)
There may be a problem with the DSC, TCS, or Hill Launch Assist (HLA) under the following conditions.
Have your vehicle inspected by an Authorized Mazda Dealer.
-
The light does not turn on or remains on even if the vehicle power is switched ON.
-
It turns on while driving the vehicle.
KEY Warning Light (Red)
The light turns on if the system has a problem or if the key is out of the operation range.
Check the contents of the message displayed and take the necessary action.
If the push button start indicator light (amber) flashes at the same time, the engine may not start. Have the vehicle inspected by an Authorized Mazda Dealer as soon as possible.
Security Indicator Light
If the security indicator light turns on/flashes while driving, do not stop the engine (leave it operating) and have the vehicle inspected at an Authorized Mazda Dealer. If you stop the engine , you may not be able to start it again.
If the engine cannot be started, switch the vehicle power OFF, place the key in another position within the operation range, and then restart the engine.
Check the security indicator light and if it does not turn off, such as it remains on or flashes, switch the vehicle power OFF, wait for a while, and then restart the engine.
If the engine does not start after three attempts, a system malfunction may have occurred. Have the vehicle inspected by an Authorized Mazda Dealer.
When repairing the immobilizer system, the key codes will need to be reprogrammed. Bring all the remaining keys to an Authorized Mazda Dealer.
High Beam Control System (HBC) Warning Light (Amber) (Some Models)
The light turns on if the system has a problem.
Have your vehicle inspected by an Authorized Mazda Dealer.
i-ACTIVSENSE Warning Light (Some Models)
The light turns on if any i-ACTIVSENSE related system has a problem.
Check the contents of the message displayed and take the necessary action.
Low Fuel Warning Light
The light turns on/flashes when the remaining fuel in the tank is near empty.
When the light flashes, a warning sound is activated.
Refuel immediately.
The light illumination timing may vary because fuel inside the fuel tank moves around according to the driving conditions and the vehicle posture.
Check Fuel Cap Warning Light
If the check fuel cap warning light illuminates while driving, the fuel-filler cap may not be installed properly.
Stop the engine and reinstall the fuel-filler cap.
Engine Oil Level Warning Light
This warning light indicates that the engine oil level is around the MIN mark.
Do not continue to drive the vehicle with the engine oil level warning light turned on. If the vehicle continues to be driven with an insufficient amount of engine oil, it could cause damage to the engine.
Add 1 L (0.26 US gal, 0.22 Imp gal) of engine oil (Search).
Seat Belt Warning Light (Front Seat)
(Except Mexico)
The warning light flashes for about 6 seconds if the driver or front passenger's seat is occupied and the seat belt is not fastened with the vehicle power switched ON.
If the driver or front passenger's seat belt is unfastened (only when the front passenger's seat is occupied) and if the vehicle is driven at about 20 km/h (12 mph) or faster, or about 10 km/h (6 mph) or faster for a continuous 30 seconds, with the seat belt unfastened, the warning light flashes for a certain period.
After a short time, the warning light stops flashing, but remains illuminated.
In addition, when the warning light flashes, a warning sound is activated.
Wear the seat belt.
-
Placing heavy items on the front passenger's seat may cause the front passenger's seat belt warning function to operate depending on the weight of the item.
-
To allow the sensor that detects an occupant to function properly, do not sit on the front passenger's seat with a cushion or other object on it. The sensor may not function properly because the additional seat cushion could cause sensor interference.
-
If a small child is seated on the front passenger's seat, the warning light may not operate.
(Mexico)
The warning light turns on if the driver or front passenger's seat is occupied and the seat belt is not fastened with the vehicle power switched ON.
If the driver or front passenger's seat belt is unfastened (only when the front passenger's seat is occupied) and if the vehicle is driven at about 20 km/h (12 mph) or faster, the warning light flashes for a certain period.
After a short time, the warning light stops flashing, but remains illuminated.
In addition, when the warning light flashes, a warning sound is activated.
Wear the seat belt.
-
Placing heavy items on the front passenger's seat may cause the front passenger's seat belt warning function to operate depending on the weight of the item.
-
To allow the sensor that detects an occupant to function properly, do not sit on the front passenger's seat with a cushion or other object on it. The sensor may not function properly because the additional seat cushion could cause sensor interference.
-
If a small child is seated on the front passenger's seat, the warning light may not operate.
Seat Belt Warning Light (Rear Seat) (Red)
When the vehicle power is switched ON, the warning lights turn on if the seat belts are not fastened.*1
After the engine is started, the warning lights turn off after a short period of time.
In addition, if a fastened seat belt is unfastened, the warning light flashes for a short period of time and then turns off.
When the warning light flashes, a warning sound is activated.
Wear the seat belt.
-
The warning light also turns on when the rear seat is unoccupied.
Rear Seat Alert Warning Light (Some Models)
The warning light turns on continuously if the system has a problem. Have the vehicle inspected by an Authorized Mazda Dealer.
Low Washer Fluid Amount Warning Light (Some Models)
The light turns on if the amount of washer fluid is low when the vehicle power is switched ON.
Add washer fluid.
Wrench Indicator Light
The wrench indication/indicator light is displayed/turns on under the following conditions.
-
When the preset maintenance period has arrived.
Refer to the Information section in the Mazda Connect Owner's Manual.
-
When the maintenance period arrives, have your vehicle inspected by an Authorized Mazda Dealer as soon as possible. If maintenance is neglected, a decrease in vehicle performance may occur which could cause damage. Have your vehicle inspected before the maintenance period arrives.
-
If the vehicle continues to be driven after the engine oil replacement period has passed, it could cause damage to the engine. Replace the engine oil before the maintenance period arrives.
-
-
The wrench indication/indicator light may display/turn on earlier than the preset period depending on vehicle usage conditions.
-
Whenever the engine oil is replaced, a reset of the vehicle engine control unit is necessary.
Refer to the Information section in the Mazda Connect Owner's Manual.
