Instrument Cluster
Instrument Cluster
-
Multi-information Display
-
Dashboard Illumination Switch
-
Tachometer
-
Speedometer
How to Use the Odometer/Trip Meter
The display changes each time the INFO switch is pressed.
-
Odometer display
-
Trip meter A display
-
Trip meter B display
When returning the trip meter to “0”, press the INFO switch for 2 seconds or longer while the trip meter is displayed.
If the lead-acid battery is disconnected for vehicle maintenance or other reasons, the trip meter display returns to “0”.
Engine Coolant Temperature Gauge
Displays the engine coolant temperature. The blue range of the gauge indicates that the engine coolant temperature is low, and the red range of the gauge indicates that the engine coolant temperature is high and overheating.
The engine coolant temperature gauge can be switched to indicate only the high engine coolant temperature range by pressing the dashboard illumination switch.
If the engine coolant temperature gauge needle is in the red range, there is the possibility of overheating. Drive slowly to reduce engine load.
Refer to Taking Action with Overheating (Search).
Dashboard Illumination
(Without auto-light control)
When the lights are turned on with the vehicle power switched ON, the brightness of the dashboard illumination is dimmed.
(With auto-light control)
When the lights are turned on with the vehicle power switched ON, the brightness of the dashboard illumination is dimmed. However, when the light sensor detects that the surrounding area is bright such as when the lights are turned on in the daytime, the dashboard illumination does not dim.
(With auto-light control)
When the vehicle power is switched ON in the early evening or at dusk, the dashboard illumination is dimmed for several seconds until the light sensor detects the brightness of the surrounding area, however, the dimming may cancel after the brightness is detected.
How to Use the Dashboard Illumination
-
Dim
-
Bright
A beep sound will be heard when the knob has been rotated to the maximum dim position.
Function for canceling illumination dimmer
The illumination dimmer can be cancelled by rotating the instrument panel illumination knob to the right until a beep sound is heard while the instrument cluster is dimmed with the vehicle power switched ON. If the instrument cluster's visibility is reduced due to glare from surrounding brightness, cancel the illumination dimmer.
Average Fuel Economy Display
This mode displays the average fuel economy by calculating the total traveled distance and the total fuel consumption since the vehicle was purchased or the past data was reset. The average fuel economy is calculated and displayed every 30 seconds.
Instantaneous Fuel Economy Display
This displays the current fuel economy by calculating the amount of fuel consumption and the distance traveled.
Displays the 0 position when the vehicle speed decreases to a constant speed or slower.
i-ACTIVSENSE Display
Displays the system status.
Compass Display
The direction the vehicle is moving is displayed in one of eight directions while the vehicle is being driven.
Roof Operation Display (Hardtop)
Displays the roof operation status.
Message Display
Displays a message to notify the user of the system operation status and malfunctions or abnormalities.
Follow the instructions indicated on the display.
Refer to How to Use the Multi-information Display (Search).
