Warning/Indicator Light Turns On
Warning Lights
If any warning/indicator light turns on/flashes, take appropriate action for each light. If the warning/indicator light does not turn off, or it turns on or flashes again, consult an Authorized Mazda Dealer.
If the warning light/indicator light turns on or flashes, park the vehicle in a safe place immediately and take appropriate measures.
Continuing to drive the vehicle while ignoring the illumination/flashing of the warning light/indicator light is dangerous because a problem may occur to a vehicle system, the engine may be damaged, or it could lead to an accident.
The details for some warnings can be viewed on the center display or instrument cluster.
Checking Using the Center Display
-
Select “Information” on the home screen.
-
Select “Vehicle Status Monitor”.
-
Select the applicable warning to view the warning details.
Checking Using the Instrument Cluster
Press the INFO switch on the steering switch to display the warning indication screen.
Refer to How to Use the Multi-information Display (Search).
ABS Warning Light
The light remains on if the system has a problem.
Have your vehicle inspected by an Authorized Mazda Dealer.
If the brake system warning light 
and the ABS warning light turn on at the same time, stop the vehicle in a safe place immediately and contact an Authorized Mazda Dealer.
The rear wheels could lock more quickly in an emergency stop than under normal circumstances which could result in an accident.
Master Warning Light
The light turns on if the system has a problem.
Check the contents of the message displayed on the center display or in the instrument cluster and take the necessary action.
DSC-TRACK Indicator Light (Some Models)
A problem in the system might be indicated under the following conditions.
Have your vehicle inspected by an Authorized Mazda Dealer.
-
The light turns on even though the DSC-TRACK switch is not being operated.
Air Bag/Seat Belt Pretensioner System Warning Light
A problem in the system might be indicated under the following conditions.
Have your vehicle inspected by an Authorized Mazda Dealer.
-
Does not turn on even if the vehicle power is switched ON.
-
Remains turned-on/flashing.
Never tamper with the air bag/pretensioner systems and always have an Authorized Mazda Dealer perform all servicing and repairs.
Self-servicing or tampering with the systems is dangerous. An air bag/pretensioner could accidentally activate or become disabled causing serious injury or death.
Low Washer Fluid Amount Warning Light (Some Models)
The light turns on if the amount of washer fluid is low when the vehicle power is switched ON.
Add washer fluid.
Wrench Indicator Light
The wrench indication/indicator light is displayed/turns on under the following conditions.
-
When the preset maintenance period has arrived.
Refer to the Mazda Connect “Vehicle Status Monitor”.
-
When the maintenance period arrives, have your vehicle inspected by an Authorized Mazda Dealer as soon as possible. If maintenance is neglected, a decrease in vehicle performance may occur which could cause damage. Have your vehicle inspected before the maintenance period arrives.
-
If the vehicle continues to be driven after the engine oil replacement period has passed, it could cause damage to the engine. Replace the engine oil before the maintenance period arrives.
-
-
The wrench indication/indicator light may display/turn on earlier than the preset period depending on vehicle usage conditions.
-
Whenever the engine oil is replaced, a reset of the vehicle engine control unit is necessary.
Refer to the Mazda Connect “Vehicle Status Monitor”.
Check Fuel Cap Warning Light
If the check fuel cap warning light illuminates while driving, the fuel-filler cap may not be installed properly.
Stop the engine and reinstall the fuel-filler cap.
