Instrument Cluster
Instrument Cluster

-
Multi-information Display
-
Dashboard Illumination Switch
-
Tachometer
-
Speedometer
Speedometer
The speedometer indicates the speed of the vehicle.
Tachometer
The tachometer shows engine speed in thousands of revolutions per minute (rpm).
Do not run the engine with the tachometer needle in the RED ZONE.
This may cause severe engine damage.

-
STRIPED ZONE
-
RED ZONE
When the tachometer needle enters the STRIPED ZONE, this indicates to the driver that the gears should be shifted before entering the RED ZONE.
Multi-information Display
The screen display informs you of the vehicle information.

The multi-information display indicates the following information.
-
Odometer
-
Trip meter
-
Engine coolant temperature gauge
-
Fuel gauge
-
Outside temperature
-
Maximum driving distance
-
Average fuel economy
-
Current fuel economy
-
i-ACTIVSENSE display
-
Door-ajar/trunk lid-open warning indication*1
-
Compass Display
-
Roof Operation Display (Hardtop)
-
Message display
-
Displayed when opening door/trunk lid.
How to Use the Multi-information Display

The screen content changes each time the INFO switch is pressed.

-
Trip A display
-
Trip B display
-
i-ACTIVSENSE display
-
Compass Display/Maximum driving distance display
-
Message display*1
-
Displayed only when a warning occurs.
Odometer/Trip Meter
Odometer
The odometer records the total distance the vehicle has been driven.
Trip meter
The driving distance for a specified interval is indicated. Two types (TRIP A, TRIP B) of interval distance can be measured.
How to Use the Odometer/Trip Meter

The display changes each time the INFO switch is pressed.

-
Odometer display
-
Trip meter A display
-
Trip meter B display
When returning the trip meter to “0”, press the INFO switch for 2 seconds or longer while the trip meter is displayed.
If the lead-acid battery is disconnected for vehicle maintenance or other reasons, the trip meter display returns to “0”.
Maximum Driving Distance Display
The maximum driving distance is calculated and displayed based on the current remaining fuel tank level and the fuel economy. When the maximum driving distance is 50 km (30 miles) or farther, the maximum driving distance indication decreases in 10 km (10 mile) increments, and when the maximum driving distance is shorter than 50 km (30 miles), it decreases in 1 km (1 mile) increments.

The maximum driving distance is just an approximate numerical value and differs from the actual driving distance. Drive the vehicle while checking the fuel gauge.
How to Use the Average Fuel Economy Display
To reset the displayed average fuel economy data, press the INFO switch for 2 seconds or longer.

After resetting the data, - - - L/100 km (- - - mpg) is displayed until the average fuel economy is recalculated and displayed.
Instantaneous Fuel Economy Display
This displays the current fuel economy by calculating the amount of fuel consumption and the distance traveled.

Displays the 0 position when the vehicle speed decreases to a constant speed or slower.
i-ACTIVSENSE Display
Displays the system status.

Compass Display
The direction the vehicle is moving is displayed in one of eight directions while the vehicle is being driven.

Message Display
Displays a message to notify the user of the system operation status and malfunctions or abnormalities.
Follow the instructions indicated on the display.
Refer to How to Use the Multi-information Display (Search).