Warning/Indicator Light Turns On

The light turns on when the engine oil pressure decreases.

 

---

Do not drive the vehicle with the engine oil warning light turned on. Driving the vehicle with decreased engine oil pressure may cause engine damage.

Close Caution

View Caution

If the engine oil warning light turns on while driving, check the engine oil using the following procedure.

1. Stop the vehicle in a safe place.

2. Stop the engine.

3. Wait for 5 minutes for the engine oil to flow into the oil pan.

4. Check the amount of engine oil.

   Refer to Inspecting Engine Oil (Search).

   If it's low, add the appropriate amount of engine oil while being careful not to overfill.

5. Start the engine and check the warning light.

If the light remains illuminated even though the oil level is normal or after adding oil, stop the engine immediately and have your vehicle towed to an Authorized Mazda Dealer.

The light turns on if the system has a problem.

Have your vehicle inspected by an Authorized Mazda Dealer.

 

---

Do not disconnect the battery cables when the check engine warning light is turned on/flashing.

The engine may be damaged when reconnecting the battery cables, which could result in a fire.

Close Warning

View Warning

The light turns on if the engine has a problem while it is running.

Park the vehicle in a safe place immediately and contact an Authorized Mazda Dealer.

If any of the following problems occur, the check engine warning light turns on.

• There is a problem with the engine control system

• There is a problem with the emission control system

• There is a problem with the transmission control system

• The fuel tank level being very low or approaching empty

• The fuel-filler cap is missing or not tightened securely

If the check engine warning light remains turned-on/flashing, do not drive at high speed and have the vehicle inspected by an Authorized Mazda Dealer as soon as possible.

The light flashes if there is a malfunction in the system.

Contact an Authorized Mazda Dealer.

 

---

Do not drive the vehicle at high speeds if the TPMS warning light turns on or flashes.

Driving the vehicle at high speeds while the TPMS warning light is turned on or flashing is dangerous because the brake performance and the steering wheel operability will be reduced. If the vehicle is driven at high speeds or the brakes are suddenly applied, it could lead to an accident. Gradually apply the brakes to lower the vehicle's speed.

Do not ignore the TPMS warning light when it is turned on or flashing.

Continuing to drive the vehicle while ignoring the illumination/flashing of the TPMS warning light is dangerous because a tire may burst which could lead to an accident. Take appropriate measures as soon as possible.

Close Warning

View Warning

A problem in the system might be indicated under the following conditions.

Have your vehicle inspected by an Authorized Mazda Dealer.

• Does not turn on even if the vehicle power is switched ON.

• Remains turned-on/flashing.

 

---

Never tamper with the air bag/pretensioner systems and always have an Authorized Mazda Dealer perform all servicing and repairs.

Self-servicing or tampering with the systems is dangerous. An air bag/pretensioner could accidentally activate or become disabled causing serious injury or death.

Close Warning

View Warning

The light turns on if the system has a problem or if the key is out of the operation range.

Check the contents of the message displayed and take the necessary action.

 

---

If the push button start indicator light (amber) flashes at the same time, the engine may not start. Have the vehicle inspected by an Authorized Mazda Dealer as soon as possible.

Close Caution

View Caution

The light turns on if there is a malfunction in the system.

Have your vehicle inspected by an Authorized Mazda Dealer.

The light turns on if the system has a problem.

Have your vehicle inspected by an Authorized Mazda Dealer.

The light turns on/flashes when the remaining fuel in the tank is near empty.

When the light flashes, a warning sound is activated.

Refuel immediately.

 

---

The light illumination timing may vary because fuel inside the fuel tank moves around according to the driving conditions and the vehicle posture.

Close Note

View Note

The wrench indication/indicator light is displayed/turns on under the following conditions.

• When the preset maintenance period has arrived.

  Refer to the Mazda Connect “Vehicle Status Monitor”.

   

  ---

  • When the maintenance period arrives, have your vehicle inspected by an Authorized Mazda Dealer as soon as possible. If maintenance is neglected, a decrease in vehicle performance may occur which could cause damage. Have your vehicle inspected before the maintenance period arrives.

  • If the vehicle continues to be driven after the engine oil replacement period has passed, it could cause damage to the engine. Replace the engine oil before the maintenance period arrives.

  Close Caution

  View Caution

 

---

• The wrench indication/indicator light may display/turn on earlier than the preset period depending on vehicle usage conditions.

• Whenever the engine oil is replaced, a reset of the vehicle engine control unit is necessary.

  Refer to the Mazda Connect “Vehicle Status Monitor”.

Close Note

View Note