Climate Control System

Vent Operation (Front)

Adjusting the Vents

Directing airflow

To adjust the direction of airflow, move the adjustment knob.

 

  • When using the air conditioner under humid ambient temperature conditions, the system may blow fog from the vents. This is not a sign of trouble but a result of humid air being suddenly cooled.

  • The air vents can be fully opened and closed by operating the dial. (Side vents only)

Close Note
View Note

Side Vents

Center Vents

Front Air Conditioner

Operation of Automatic Air Conditioner

  1. Press the AUTO switch. Selection of the airflow mode, air intake selector and amount of airflow will be automatically controlled.

  2. Use the temperature control dial to select a desired temperature.

    Turn the front passenger temperature control dial to control the set temperature individually for the driver and front passenger.

To turn off the system, press the power switch.

 

  • Setting the temperature to maximum hot or cold will not provide the desired temperature at a faster rate.

  • When selecting heat, the system will restrict airflow until it has warmed to prevent cold air from blowing out of the vents.

Close Note
View Note

Windshield Defrosting and Defogging

Press the windshield defroster switch.

In this position, the outside air position is automatically selected, and the air conditioner automatically turns on. The air conditioner will directly dehumidify the air to the front windshield and side windows (Search).

Airflow amount will be increased.

 

Set the temperature control to the hot or warm position when defogging ( position):

Using the position with the temperature control set to the cold position is dangerous as it will cause the outside of the windshield to fog up. Your vision will be hampered, which could lead to a serious accident.

Close Warning
View Warning

 

Use the temperature control dial to increase the air flow temperature and defog the windshield more quickly.

Close Note
View Note
Rear Air Conditioner

Control Switches

Rear switch

Press the rear switch to operate the rear air conditioner.

The indicator illuminates to indicate that the rear air conditioner is operating.

AUTO switch

By pressing the AUTO switch the following functions will be automatically controlled in accordance with the set temperature:

  • Airflow temperature

  • Amount of airflow

  • Selection of airflow mode

Power switch

The rear climate control system turns on or off by pressing the power switch.

Temperature control switch

This switch controls temperature. Press for hot and for cold.

 

When the temperature control switch is set to the maximum or minimum, “Hi” or “Lo” is indicated on the display.

Close Note
View Note

Fan control switch

The fan has five speeds. The selected speed will be displayed.

Mode selector switch

The desired airflow mode can be selected. Refer to Selecting the Airflow Mode (Search).

Page top