Audio Set

Home screen

Icon	Function
	Applications Information such as average fuel economy, maintenance, and warnings can be verified. Depending on the grade and specification, the screen display may differ.
	Entertainment Operates audio such as the radio. The audio source most recently used is displayed. An audio source which cannot be used at that time is skipped and the previous audio source is displayed. To change the audio source, select the icon displayed at the bottom of the screen.
	Communication Bluetooth^® related functions are available.
	Navigation Navigation screen is displayed (vehicles with navigation system). If the SD card for the navigation system is not inserted, the compass indicating the direction in which the vehicle is moving is displayed. The compass may not indicate the correct bearing when the vehicle is stopped or traveling at a slow speed.
	Settings Overall setting menu (Such as display, sound, Bluetooth^® and Language). Depending on the grade and specification, the screen display may differ.

Volume/Display/Sound Controls

Operating the Radio

Operating the Satellite Radio (Some Models)

SiriusXM^® operation

Select the icon on the home screen to display the Entertainment screen. When is selected, the following icons are indicated in the bottom part of the center display.

Icon	Function
	Displays the Entertainment menu. Use to switch to a different audio source.
	Displays the channel list of the current category.
	Displays the favorites list. Long-press to store the channel currently being aired. Refer to Operating the Radio (Search).
	Plays each channel in the current channel list for 6 seconds. Select again to continue receiving the channel. The function can be selected when the Tune Scan™ setting is turned off.
	Each channel programmed to Smart Favorite is played for 6 seconds. The function can be selected when all of the following conditions are met. Two or more music channels have been programmed to Smart Favorite The Tune Scan™ setting is ON
	Displays in red while a station in a TuneMix™ channel is being broadcast. The TuneMix™ broadcast ends when the icon is pressed.
	(During TuneMix™ broadcast/Tune Scan™ operation) Returns to the beginning of the previous song.
	Plays a radio. When selected again, playback is temporarily stopped.
	(During TuneMix™ broadcast/Tune Scan™ operation) Advances to the beginning of the next song.
	(When in a mode other than TuneMix™/Tune Scan™) Plays the previous channel.
	(When in a mode other than TuneMix™/Tune Scan™) Plays the next channel.
	Displays the setting screen.
	Displays sound settings to adjust audio quality level. Refer to Volume/Display/Sound Controls (Search).

Selection from channel list

Receivable channels can be displayed on the channel list screen. You can easily select the channel you want to listen from the list. Each category can be also displayed.

Select the icon to display the channel list.
Select a desired channel.

(Select from category list)

Select the icon to display the channel list.
Select to display the category list.
Select a desired category.

Creating TuneMix™ Channel

The music channels programmed to Smart Favorite can be programmed to the TuneMix™ Channel.

Smart Favorite can be programmed by selecting on the SiriusXM Settings screen.
The TuneMix™ Channel cannot be created unless two or more SiriusXM music channels have been programmed to Smart Favorite.

Close Note

View Note

Select the icon to display the channel list.
Select the tab.
Select .
Select .
Select the desired music channel to the TuneMix™ Channel.
Select to register the TuneMix™ Channel.

How to use AUX mode

How to use USB mode

How to use Apple CarPlay™ (Some Models)

How to use Android Auto™ mode (Some Models)

Bluetooth^®

Bluetooth^® Preparation

How to Use Stitcher™ Radio

Bluetooth^® Hands-Free

Receiving an Incoming Call

When an incoming call is received, the incoming call notification screen is displayed. The “Incoming Call Notifications” setting must be on.

Refer to Communication Settings (Search).

To accept the call, press the pick-up button on the audio control switch or select on the screen.

To reject the call, press the hang-up button on the audio control switch or select on the screen.

The following icons are displayed on the screen during a call. Icons which can be used differ depending on use conditions.

Icon	Function
	Displays the Communication menu.
	Ends the call.
	Transferring a call from hands-free to a mobile phone Communication between the Bluetooth^® unit and a device (mobile phone) is canceled, and an incoming call will be received by the device (mobile phone) like a standard call.
	Transferring a call from a device (mobile phone) to hands-free Communication between devices (mobile phone) can be switched to Bluetooth^® Hands-Free.
	Mute The microphone can be muted during a call. When selected again, the mute is canceled.
	To make a 3-way call, select the contacts from the following: : Call History is displayed. : The phonebook is displayed. : The dial pad is displayed. Input the phone number. The device may be unusable depending on the contractual content.
	The call on hold is made to make a 3-way call. The device may be unusable depending on the contractual content.
	Switches the call on hold.
	DTMF (Dual Tone Multi-Frequency Signal) Transmission This function is used when transmitting DTMF via the dial pad. The receiver of a DTMF transmission is generally a home telephone answering machine or a company's automated guidance call center. Input the number using a dial pad.

If the ignition is switched off during a hands-free call, the line is transferred to the device (Mobile phone) automatically.
If the DTMF code has two or more digits or symbols, each one must be transmitted individually.

Close Note

View Note

Receiving and Replying to Messages (available only with E-mail/SMS compatible phones)

SMS (Short Message Service) messages, and E-mail received by connected devices can be downloaded, displayed, and played (read by the system).

Additionally, replies can also be made to calls and messages in the received messages.

Downloading messages

Up to 20 new messages can be downloaded and displayed from a connected device.

For E-mail, 20 messages for each account can be downloaded.

Close Note

View Note

(Automatic downloading)

The “Auto Download Email” (E-mail) or “Auto Download Text Message” (SMS) setting must be on. A message is downloaded automatically when the Bluetooth^® unit is connected to the device.

Refer to Communication Settings (Search).

(Manually downloading)

When the “Auto Download Email” (E-mail) or “Auto Download Text Message” (SMS) setting is off, the message is downloaded using the following procedure.

Select the icon on the home screen to display the Communication screen.
Select or to display the Inbox.
Select .
Download will be started from the mobile phone.

Attached data is not downloaded.
Messages up to 1 kilobyte (E-mail)/140-bytes (SMS) can be downloaded.
A message list is created for each device.
If the connected device does not correspond to MAP 1.0, the AT command is used to download. The downloaded message indicates that it is already read.
Downloading using the AT command may not function depending on the connected device.
If an iPhone is connected, the following functions cannot be used.
- Downloading past messages
- Replying to messages

iPhone is a trademark of Apple Inc., registered in the U.S. and other countries.

Close Note

View Note

Receiving messages

(Method 1)

When a device receives a message, a message received notification is displayed. The “Email Notifications” (E-mail) or “Text Notifications” (SMS) setting must be on.

Refer to Communication Settings (Search).

Select and display the message.

(Method 2)

Select the icon on the home screen to display the Communication screen.
Select and display the new message list for E-mail and SMS.
Select the message you would like to display.

The following icons are displayed in the lower part of the details on the message. Icons which can be used differ depending on use conditions.

Icon	Function
	Displays the Communication menu.
	Displays the inbox.
	Plays back a message. When selected again, playback is temporarily stopped.
	Displays the previous message.
	Displays the next message.
	Only replies to the sender of the currently displayed message. Select the sentence on the displayed reply screen and select the sentence for sending from the preset message. Select .
	(Only E-mail) Replies to all members including CC. Select the sentence on the displayed reply screen and select the sentence for sending from the preset message. Select .
	Makes a call to a person who sent a message. For E-mail, this function may not work depending on the device.
	Deletes a message. The messages stored in a device is also deleted.

Up to three preset messages can be selected.

Close Note

View Note

Example of use (verify unread E-mail)

Select the icon on the home screen to display the Communication screen.
Select to display the inbox.
Select the unread message displayed in bold.
The details of the message are displayed and replying to the message, making a call, or playback can be performed.

Changing account for displaying (E-mail only)

Select .
Select the account which you would like to display. Only the messages for the selected account are displayed in the inbox.

Editing preset messages

Select the icon on the home screen to display the Communication screen.
Select .
Select .
Select the preset message which you would like to edit. The keyboard screen is displayed.
When the message is input and is selected, the message is stored as a preset message.

Select the icon to change the language.
Select the icon to switch between capitalized and lower-case characters.
Select the icon to return to the previous screen without storing the edit.

Close Note

View Note

Voice Recognition

Voice Command List

Voice command

When the talk button is pressed and the following command is spoken, the audio or navigation can be operated. The commands in the () can be omitted. The specified name and number are put into the {}.

Standard command

Voice command	Function
Help	Usable commands can be verified.
Tutorial	Basic voice commands and methods of use can be verified.
(Navigate/Take me/Drive) Home	Set the destination to Home.

Communication (phone) related command

Voice command	Function
Call {name in phonebook} (mobile/home/work/other) Example: “Call John Mobile”	Call to the contact in the downloaded phonebook. Refer to Making a Call (Search).
Redial	Call to the last contact you called. Refer to Making a Call (Search).
Callback	Call to the last contact who called you. Refer to Making a Call (Search).

Entertainment (audio) related command

Voice command	Function	Corresponding audio source
(Go to/Play) Bluetooth (Audio)	Switches the audio source to BT audio. Can also switch to each audio source by similarly using commands such as FM, AM, or USB.	All
Play Artist {Artist name}	Plays the selected artist.	USB

Voice command

Function

Corresponding audio source

(Go to/Play) Bluetooth (Audio)

Switches the audio source to BT audio.

Can also switch to each audio source by similarly using commands such as FM, AM, or USB.

All

Play Artist {Artist name}

Plays the selected artist.

USB

Navigation related command (Some Models)

For the navigation screen voice commands, refer to the separate navigation system manual.

Some commands cannot be used depending on the grade and specification.
Some commands cannot be used depending on the device connection conditions and the use conditions.
The commands are examples of the available commands.

Audio Set

Home screen

SiriusXM® operation

Receiving an Incoming Call

Receiving and Replying to Messages (available only with E-mail/SMS compatible phones)

Voice Recognition

Voice Command List

SiriusXM^® operation