Windows

Power Windows

Power Windows

Opening/Closing Windows

The window opens while the switch is pressed and it closes while the switch is pulled up with the power switch switched ON.

The front passenger's window can be opened/closed when the power window lock switch on the driver's door is in the unlocked position. Keep this switch in the locked position while children are in the vehicle.

 

Master control switches

  1. Close

  2. Open

  3. Passenger's window

  4. Power window lock switch

  5. Driver's window

  6. Locked position

  7. Unlocked position

 

Passenger's window switch

  1. Close

  2. Open

 

 

  • A power window may no longer open/close if you continue to press the switch for a long time. If the power window does not open/close, wait for a while and then operate the switch again.

  • The passenger windows may be opened or closed using the master control switches on the driver's door.

  • The power window can be operated for about 40 seconds after the power switch is switched from ON to ACC or off with all doors closed. If any door is opened, the power window will stop operating.

Close Note
View Note

Auto-opening/Closing

To fully open the window automatically, press the switch completely down, then release. The window will fully open automatically.

To fully close the window automatically, pull the switch completely up, then release. The window will fully close automatically.

 

To stop the window partway, pull or press the switch in the opposite direction and then release it.

 

Power window system initialization procedure

If you operate the switch any number of times with the power window not fully closed, the window may no longer fully open/close automatically.

The power window auto function will only resume on a power window that has been reset.

  1. Switch the power switch ON.

  2. Make sure that the power window lock switch located on the driver's door is not depressed.

  3. Press the switch and fully open the window.

  4. Pull up the switch to fully close the window and continue holding the switch for about 2 seconds after the window fully closed.

  5. Make sure that the power windows operate correctly using the door switches.

Close Note
View Note

Jam-safe Window

When the window is closing and a foreign object is detected between the window and the window frame, the window stops closing and automatically opens partway.

 

  • The jam-safe function may operate under the following conditions:

    • A strong impact is detected while the window is closing.

    • The window is closing in very low temperatures.

  • (A window cannot be closed)

    If the jam-safe function has operated and the window cannot be closed, check around the window frame for a foreign object.

    If there is no foreign object around the window frame, forcibly close a window using the following procedure.

    1. After switching the power switch OFF, wait for 45 seconds or longer.

    2. Switch the power switch ON.

    3. Operate the switch in the direction to close the window until the jam-safe function operates and the window stops. Repeat this operation a total of 5 times.

    4. Continue pulling up the switch to fully close the window.

Close Note
View Note
Moonroof (Some Models)

Moonroof

The moonroof can be opened or closed when operating the overhead tilt/slide switch at the front seats.

 

Do not let passengers stand up or extend part of the body through the open moonroof while the vehicle is moving:

Extending the head, arms, or other parts of the body through the moonroof is dangerous. The head or arms could hit something while the vehicle is moving. This could cause serious injury or death.

Never allow children to play with the tilt/slide switch:

The tilt/slide switch would allow children to operate the moonroof unintentionally, which could result in serious injury if a child's hands, head or neck becomes caught by the moonroof.

Make sure the opening is clear before closing the moonroof:

A closing moonroof is dangerous. The hands, head, or even neck of a person, especially a child, could be caught in it as it closes, causing serious injury or even death.

Make sure nothing blocks the moonroof just before it reaches the fully closed position:

Blocking the moonroof just before it reaches the closed position is dangerous.

In this case, the jam-safe function cannot prevent the moonroof from closing. If fingers are caught, serious injuries could occur.

Close Warning
View Warning

 

  • Do not sit on or put heavy items on the area where the moonroof opens and closes. Otherwise, the moonroof could be damaged.

  • Do not open or close the moonroof forcefully during freezing temperatures or snowfall. Otherwise, the moonroof could be damaged.

  • The sunshade does not tilt. To avoid damaging the sunshade, do not push it up.

  • Do not close the sunshade while the moonroof is opening. Trying to force the sunshade closed could damage it.

Close Caution
View Caution

Tilt/Slide Operation

The moonroof can be opened or closed electrically only when the power switch is switched ON.

  • Before leaving the vehicle or washing your Mazda, make sure the moonroof is completely closed so that water does not get inside the cabin area.

  • After washing your Mazda or after it rains, wipe the water off the moonroof before operating it to avoid water penetration which could cause rust and water damage to your headliner.

  1. Tilt/Slide switch

Tilt Operation

The rear of the moonroof can be tilted open to provide more ventilation.

 

To fully tilt automatically, momentarily press the tilt/slide switch.

To fully close automatically, momentarily press the tilt/slide switch in the forward direction.

To stop tilting partway, press the tilt/slide switch.

When the moonroof is already slid open and you want to tilt it open, first close the moonroof and then do a tilt operation.

  1. Tilt up

  2. Close (Tilt down)

 

Slide Operation

To fully open automatically, momentarily press the tilt/slide switch in the backward direction.

To fully close automatically, momentarily press the tilt/slide switch in the forward direction.

To stop sliding partway, press the tilt/slide switch.

When the moonroof is already tilted open and you want to slide it open, first close the moonroof and then do a slide operation.

  1. Open

  2. Close

 

If the moonroof does not operate normally, do the following procedure:

  1. Switch the power switch ON.

  2. Press the tilt switch, to partially tilt open the rear of the moonroof.

  3. Repeat Step 2. The rear of the moonroof tilts open to the fully open position, then closes a little.

 

If the reset procedure is performed while the moonroof is in the slide position (partially open) it will close before the rear tilt opens.

Close Note
View Note

Jam-safe Moonroof

If a person's hands, head or an object blocks the moonroof while it is closing, the moonroof will stop and move in the open direction.

 

  • The jam-safe function may operate under the following conditions:

    • A strong impact is detected while the moonroof is closing automatically.

    • The moonroof is closing automatically during very low temperatures.

  • In the event the jam-safe function activates and the moonroof cannot be closed automatically, press the tilt/slide switch and the moonroof will close.

  • The jam-safe moonroof function does not operate until the system has been reset.

Close Note
View Note

Sunshade

The sunshade can be opened and closed by hand.

 

The sunshade opens at the same time as the moonroof slides open, but it must be closed by hand.

  1. Sunshade

Page top