Instrument Cluster and Display

Instrument Cluster and Display

Instrument Cluster

Speedometer

The speedometer indicates the speed of the vehicle.

Average Energy Efficiency

The average energy efficiency is calculated every 30 seconds from the total traveled distance and the total electrical power consumption since the vehicle was purchased or the past data was reset, and the rate is displayed.

The average energy efficiency is also indicated by a red arrow on the instantaneous energy efficiency gauge.

 

 

 

To reset the displayed average energy efficiency data, press the INFO switch for 1.5 seconds or longer. After resetting the data, - - - kWh/100 km (- - - mile/kWh) is displayed before the average energy efficiency is recalculated and displayed.

Message Display

A message such as the system operation status, a malfunction, or an abnormality is indicated.

Warning/indicator light in instrument cluster turns on/flashes or symbol is indicated on display at same time as message

Check the information regarding the warning/indicator light or indicated symbol.

Refer to If a Warning Indication/Warning Lights (Search).

Refer to If a Indication/Indicator Lights (Search).

Message only is indicated on display

Follow the instructions indicated on the display. For the display content, refer to the next page.

Refer to If a Message Indicated on Multi-information Display (Search).

Indication/Indicator Lights

These lights turn on or flash to notify the user of the system operation status or a system malfunction.

Signal

Indicator

Refer to

(Green)

Seat Belt Indicator Light (Rear seat)

(Search)

Front Passenger Air Bag Deactivation Indicator Light

(Search)

Security Indicator Light

Immobilizer System

(Search)

Malfunction

(Search)

(Green)

KEY Indicator Light

(Search)

Wrench Indication/Indicator Light*1

(Search)

Shift Position Indication

(Search)

Lights-On Indicator Light

(Search)

Headlight High-Beam Indicator Light

Headlight High-Low Beam

(Search)

Flashing the Headlights

(Search)

Turn Signal/Hazard Warning Indicator Lights

Turn and Lane-Change Signals

(Search)

Hazard Warning Flasher

(Search)

Electric Parking Brake (EPB) Indication/Indicator Light*1*2

(Search)

AUTOHOLD Active Indicator Light*1

(Search)

Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) indicator Light (Some Models)

(Search)

Traffic Jam Assist (TJA) Indicator Light (Some Models)

(Search)

TCS/DSC Indication/Indicator Light*1

Traction Control System (TCS)

(Search)

Dynamic Stability Control (DSC)

(Search)

Turns on

(Search)

READY Indication

(Search)

TCS OFF Indicator Light*1

(Search)

(White)

i-ACTIVSENSE Status Symbol (Warning/Risk Avoidance Support System)

(Search)

(Green)

(Amber)

i-ACTIVSENSE OFF Symbol (Warning/Risk Avoidance Support System)

(Search)

(Green)

High Beam Control System (HBC) Indicator Light (Some Models)

(Search)

(White)

Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) Standby Indication (Some Models)

(Search)

Traffic Jam Assist (TJA) Standby Indication (Some Models)

(Search)

(Green)

Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) Set Indication (Some Models)

(Search)

Traffic Jam Assist (TJA) Set Indication (Some Models)

(Search)

Smart Brake Support (SBS) OFF Indicator Light*1 (Some Models)

(Search)

Emergency Lane Keeping (ELK) OFF Indicator Light*1 (Some Models)

(Search)

(White)

Cruise Standby Indication (Some Models)

(Search)

(Green)

Cruise Set Indication (Some Models)

(Search)
  1. The light turns on when the power switch is switched ON for an operation check, and turns off a few seconds later or when the EV system is started. If the light does not turn on or remains on, have the vehicle inspected by an Authorized Mazda Dealer.

  2. The light turns on continuously when the parking brake is applied.

Page top