Warning/Indicator Lights and Warning Sounds
If a Warning Light Turns On or Flashes
Electronic Brake Force Distribution System Warning
If the electronic brake force distribution control unit determines that some components are operating incorrectly, the control unit may illuminate the brake system warning light and the ABS warning light simultaneously. The problem is likely to be the electronic brake force distribution system.
Do not drive with both the brake system warning light and ABS warning light illuminated. Have the vehicle towed to an Authorized Mazda Dealer to have the brakes inspected as soon as possible:
Driving when the brake system warning light and ABS warning light are illuminated simultaneously is dangerous.
When both lights are illuminated, the rear wheels could lock more quickly in an emergency stop than under normal circumstances.
Remaining High Voltage Battery Power Warning Indication/Warning Light
“High Voltage Battery Is Low. Charge Battery Soon” displays/turns on
The indication displays when the remaining high voltage battery power is low.
“High Voltage Battery Is Urgently Low Charge Battery Immediately” displays/flashing
The indication displays when the remaining high voltage battery power is 0.
“High Voltage Battery Is Depleted Vehicle Cannot Be Driven Until Battery Is Charged” displays/flashing
The indication/light displays/flashes when the remaining high voltage battery power is 0 and the vehicle cannot be driven.
Shift Control System Warning Indication/Warning light
The indication/light displays/turns on if the shift control system has a malfunction.
“Shift Control System Malfunction Stop the Vehicle in a Safe Location” displays/turns on
There is a serious malfunction with the shift control system.
Park the vehicle in a safe place immediately and contact an Authorized Mazda Dealer.
“Shift Control System Malfunction Have the Vehicle Inspected” displays/turns on
There is a malfunction with the shift control system.
Have your vehicle inspected by an Authorized Mazda Dealer.
“Vehicle Cannot Shift Into Park. Stop the Vehicle in a Safe Location Then Apply the Parking Brake” displays/turns on
The vehicle cannot be held in a stopped position even when the selector lever is in the P position.
When parking or stopping the vehicle, always apply the parking brake. In addition, the EV system may not start again if it is stopped.
Have your vehicle inspected by an Authorized Mazda Dealer.
ABS Warning Indication/Warning Light
If the ABS warning light stays on while you're driving, the ABS control unit has detected a system malfunction. If this occurs, your brakes will function normally as if the vehicle had no ABS.
Should this happen, consult an Authorized Mazda Dealer as soon as possible.
The brake assist system does not operate while the ABS warning light is illuminated.
Brake Control System Warning Indication/Warning Light
The warning light illuminates when the system has a malfunction. Have your vehicle inspected at an Authorized Mazda Dealer.
TCS/DSC Indication/Indicator Light (Turns on)
If the light stays on, the TCS, DSC or the brake assist system may have a malfunction and they may not operate correctly. Take your vehicle to an Authorized Mazda Dealer.
Air Bag/Seat Belt Pretensioner System Warning Indication/Warning Light
A system malfunction is indicated if the warning light constantly flashes, constantly turns on or does not turn on at all when the power switch is switched ON. If any of these conditions occurs, consult an Authorized Mazda Dealer as soon as possible. The system may not operate in an accident.
Never tamper with the air bag/pretensioner systems and always have an Authorized Mazda Dealer perform all servicing and repairs:
Self-servicing or tampering with the systems is dangerous. An air bag/pretensioner could accidentally activate or become disabled causing serious injury or death.
Tire Pressure Monitoring System (TPMS) Warning Indication/Warning Light (Flashing)
If there is a problem with the TPMS or the voltage of a tire pressure sensor decreases, the TPMS warning light flashes and a message is displayed on the multi-information display. Have your vehicle inspected by an Authorized Mazda Dealer.
Do not drive the vehicle at high speeds if the TPMS warning light turns on or flashes:
Driving the vehicle at high speeds while the TPMS warning light is turned on or flashing is dangerous because the brake performance and the steering wheel operability will be reduced. If the vehicle is driven at high speeds or the brakes are suddenly applied, it could lead to an accident. Gradually apply the brakes to lower the vehicle's speed.
Do not ignore the TPMS warning light when it is turned on or flashing:
Continuing to drive the vehicle while ignoring the illumination/flashing of the TPMS warning light is dangerous because a tire may burst which could lead to an accident. Take appropriate measures as soon as possible.
KEY Warning Indication/Warning Light (Red)
“Keyless Entry System Malfunction. Have the Vehicle Inspected” is displayed
This message is displayed if the system has a problem.
Contact an Authorized Mazda Dealer.
If the power switch indicator light (amber) flashes at the same time, the EV system may not start. Have the vehicle inspected by an Authorized Mazda Dealer as soon as possible.
Refer to When Stopping the EV System (Search).
“Key Not Detected” is displayed
The KEY warning indication/warning light (red) displays/turns on under the following conditions. Bring the key into the operation range.
-
The key is outside of the operation range or it is placed in the cabin but in a position where it is difficult to be detected.
-
Without the power switch switched OFF, the key is taken out of the cabin, then all the doors are closed.
Security Indicator Light
If the security indicator light turns on/flashes while driving, do not stop the EV system (leave it operating) and have the vehicle inspected at an Authorized Mazda Dealer. If the EV system is stopped, it may not be restarted.
If the EV system cannot be started, switch the power switch OFF, place the key in another position within the operation range, and then restart the EV system.
Check the security indicator light and if it does not turn off, such as it remains on or flashes, switch the power switch OFF, wait for a while, and then restart the system.
If the EV system does not start after three attempts, a system malfunction may have occurred. Have the vehicle inspected by an Authorized Mazda Dealer.
Because the electronic codes are reset when the immobilizer system is repaired, the keys are needed. Make sure to bring all the keys to an Authorized Mazda Dealer so that they can be programmed.
High Beam Control System (HBC) Warning Indication/Warning Light (Amber) (Some Models)
The light remains turned on if there is a problem with the system. Have your vehicle inspected at an Authorized Mazda Dealer.
i-ACTIVSENSE Warning Indication/Warning Light (Some Models)
The indication displays if the system has a malfunction.
Check the reason for the indication displaying on the center display or multi-information display.
Refer to If a Warning Light Turns On or Flashes (Search).
Low Washer Fluid Level Warning Indication/Warning Light (Some Models)
This warning light indicates that little washer fluid remains.
Action to be taken
Add washer fluid (Search).
Door-Ajar/Liftgate-Ajar Warning Indication/Warning Light
The light turns on if any door/liftgate is not closed securely.
Action to be taken
Close the door/liftgate securely.
Tire Pressure Monitoring System (TPMS) Warning Indication/Warning Light (Turns on)
If a tire pressure decreases below the specified air pressure, the TPMS warning light turns on.
At the same time, a message and the tire pressure of each tire are displayed on the multi-information display alternately. In addition, the tire (s) with low air pressure is displayed in yellow.
Do not drive the vehicle at high speeds if the TPMS warning light turns on or flashes:
Driving the vehicle at high speeds while the TPMS warning light is turned on or flashing is dangerous because the brake performance and the steering wheel operability will be reduced. If the vehicle is driven at high speeds or the brakes are suddenly applied, it could lead to an accident. Gradually apply the brakes to lower the vehicle's speed.
Do not ignore the TPMS warning light when it is turned on or flashing:
Continuing to drive the vehicle while ignoring the illumination/flashing of the TPMS warning light is dangerous because a tire may burst which could lead to an accident. Take appropriate measures as soon as possible.
While the TPMS is learning the tire positions, such as immediately after a tire position has been changed, the tire pressure at the tire position prior to it being changed is displayed until the system completes the learning. For this reason, the tire pressures displayed for the tire positions may be different from the actual tire pressures at the tire positions.
Action to be taken
Adjust the tire pressures to the appropriate pressures.
Refer to Tire Inflation Pressure (Search).
-
Adjust the tire pressures while the tires are cool. Because the air pressure in the tires fluctuates depending on the temperature, before adjusting the tire pressures, let the vehicle sit for an hour or drive it only within a 1.6 km (1 mile) distance. If the tire pressures are adjusted while the tires are warm, the tire pressures may decrease below the specified air pressure after cooling down which could turn on the warning light. In addition, because the air pressure in the tires decreases when the ambient temperature is low, if the ambient temperature increases, an illuminated TPMS warning light may turn off. Under any circumstances, always adjust the tire pressures while the tires are cool.
-
After adjusting the tire pressures, the TPMS warning light turns off. If the TPMS warning light does not turn off, drive the vehicle at a speed of about 25 km (16 mph) or faster for 3 minutes or longer and make sure the warning light turns off.
If the TPMS warning light remains on even after adjusting the tire pressures, one of the tires may have a puncture.
KEY Indicator Light (Green) (Flashing)
“Low Key Fob Battery. Replace Battery” is displayed/When the light is flashing
When the key battery is low, the indication is displayed when the power switch is switched OFF.
Action to be taken
Replace the key battery.
Message Indicated on Multi-information Display
Message Indicated on Multi-information Display
If there is a notification from the vehicle, a message is displayed on the multi-information display. Check the information and take the necessary action.
-
Multi-information display
If the warning light turns on/flashes simultaneously or a symbol is indicated on the display, check the information regarding the warning light or symbol.
Refer to If a Warning Light Turns On or Flashes (Search).
|
Display*1*2*3 |
Content |
Action to be taken |
|---|---|---|
|
Depress Brake Pedal. Brake Hold Disabled |
This message is indicated when there is a problem with the brake related system while the vehicle is being held in a stop position by the AUTOHOLD function. |
Depress the brake pedal. Cancel the AUTOHOLD function and have your vehicle inspected at an Authorized Mazda Dealer. |
|
Steep Slope. Continue Pressing Brake Pedal to Hold Stopped Position |
This message indicates the possibility of the vehicle not being held in the stopped position by the AUTOHOLD function, such as on steep slopes. |
Depress and hold your foot on the brake pedal. |
|
Depress Brake Pedal and Operate Switch to Release Elec. Parking Brake |
This message is indicated when the Electric Parking Brake (EPB) switch is operated without depressing the brake pedal. |
Operate the Electric Parking Brake (EPB) switch while depressing the brake pedal. |
|
Depress Brake Pedal and Operate Switch to Release |
This message is indicated when the cancel operation is done without depressing the brake pedal while the vehicle is being held in the stopped position by the AUTOHOLD function. |
Cancel the AUTOHOLD function stop hold control while depressing the brake pedal. |
|
Mazda Radar Cruise Control Canceled. Drive Safely |
This message is indicated when the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) have been canceled other than by the driver. |
Have your vehicle inspected by an Authorized Mazda Dealer. |
|
Traffic Jam Assist Operation Canceled Drive Safely |
This message is indicated when the Traffic Jam Assist (TJA) have been canceled other than by the driver. |
Have your vehicle inspected by an Authorized Mazda Dealer. |
|
Distance & Speed Alert Operation Canceled Drive Safely |
This message is indicated when the Distance & Speed Alert (DSA) have been canceled other than by the driver. |
Have your vehicle inspected by an Authorized Mazda Dealer. |
|
Cruise Control Operation Canceled. Drive Safely |
This message is indicated when the Cruise Control have been canceled other than by the driver. |
Have your vehicle inspected by an Authorized Mazda Dealer. |
|
Emergency Braking Activated. Depress Brake Pedal to Hold Stop |
This message is indicated after the Smart Brake Support (SBS) brakes operate and when the SBS is canceled. |
Depress the brake pedal. |
|
Touch Key Fob to Push Button Start Switch |
This message is indicated when the key battery is weak (battery dead or damaged key). |
Touch the key against power switch to start the EV system. Refer to Starting the EV System When the Key Battery is Dead (Search). |
|
Depress Brake Pedal to Start Vehicle |
This message is displayed when the power switch is pressed without depressing the brake pedal. |
To start the EV system, press the power switch with the brake pedal depressed. |
|
Check Shift Selector Lever Position |
Displays in the following cases:
|
Check the selector lever position. |
|
Close Door and Fasten Seat Belt |
This message is indicated when the AUTOHOLD switch is pressed with the driver’s seat belt unfastened or the driver’s door open. |
Fasten the driver's seat belt and press the AUTOHOLD switch with the driver’s door closed. |
|
Wiper Blades Must Be on Windshield Before Operating |
This message is indicated when the power switch is switched ON with the wiper arms at the service positions. |
Return the wiper arms to the initial positions. |
|
Windshield Wiper Range of Motion Reduced. Remove Obstruction(s) |
This message is indicated when there is snow or dirt accumulation on the windshield and the wiper operation range is narrowed. |
Remove foreign matter from the windshield. |
|
Anti Roll Away Engaged. Move Gear Selector Lever into Park |
This message is indicated when the AUTO P (parking lock) function operates. |
Shift the selector lever to the P position. |
|
Move Gear Selector Lever into Park to Start Vehicle |
This message is indicated when the power switch is switched ON while the shift position is different from the selector lever position. |
Shift the selector lever to the P position. |
|
Vehicle Will Not Shift While Accelerator Pedal Is Depressed |
This message is indicated when the accelerator pedal is depressed with the selector lever in the N position. |
Release your foot from the accelerator pedal. |
|
Selector Position Ignored. Depress Brake Pedal for Shift Selection |
This message is indicated when the selector lever is shifted from the N position to the D or R position with the brake pedal not depressed. |
Depress the brake pedal. |
|
Vehicle in Neutral |
This message is displayed when in neutral hold mode (automatic car wash mode). |
The vehicle is in neutral hold mode (automatic car wash mode). If necessary, cancel neutral hold mode (automatic car wash mode). Refer to Selector Lever Operation (Search). |
|
Vehicle in Neutral. Move Gear Selector Lever into Neutral |
This message is indicated if the selector lever is shifted to the D or R position while neutral hold mode (automatic car wash mode) is operating. |
Shift the selector lever to the N position. |
|
Disconnect Charger to Start Vehicle |
This message is indicated when the EV system is started while the charge connector is connected. |
When starting the EV system, disconnect the charge connector. |
|
EV Charger Connected. Vehicle Cannot Be Driven |
This message is indicated when the charge connector is connected while the EV system is operating. |
When charging, switch the power switch OFF. |
|
Battery Heater Will Reduce High Voltage Battery Level Connect to EV Charger To Avoid High Voltage Battery Drain |
This message is indicated when the EV system is started after the battery heater has operated while the charge connector is not connected. |
Check the remaining distance-to-full discharge. Perform charging if necessary. |
|
Battery Heating Incomplete Due to High Voltage Battery Level Connect to EV Charger To Avoid High Voltage Battery Drain |
This message is displayed when the EV system is started after the battery heater stops automatically. |
If the battery heater operates while the vehicle is parked, connect the charge connector. |
|
Battery Heating Canceled Due to Five Days of Vehicle Inactivity Turn Battery Heater Off If Vehicle Will Not Be Driven |
This message is displayed when the EV system is started after the battery heater has operated for a long time and stopped automatically. |
If the vehicle is not used for long periods, set the battery heater to off. |
|
High Voltage Battery Charging Interrupted |
This message is displayed when the charging is interrupted. |
Check the connection status of the charge connector. |
|
Rising EV System Temp. Acceleration May Be Limited Avoid Moving at Very Low Speeds. Depress Brake When Not Moving |
This message is indicated when the vehicle is held in the stopped position with the accelerator pedal operated, such as on an upslope, and the motor reaches a high temperature. |
Depress the brake pedal. |
|
Regenerative Braking Temporarily Reduced |
This message is indicated when the regenerative braking is restricted. |
Drive the vehicle carefully because the regenerative braking force decreases. |
|
Shift Into Park Before Exiting Vehicle |
This message is indicated when the driver’s door is opened with the selector lever in a position other than the P position. |
Close the driver’s door or shift the selector lever to the P position. |
|
Battery Saving Mode. Drive Vehicle to Charge 12V Battery |
This message is indicated when the power consumption exceeds a certain amount such as by repeatedly opening/closing the doors or the liftgate when the power switch is switched OFF. Some of the functions are restricted to reduce power consumption. |
Drive the vehicle for 5 minutes or longer to charge the 12V battery. The warning message will clear just after starting the EV system. |
-
A pop-up is displayed when a warning occurs.
-
One screen displays four rows. If the entire message cannot be displayed on the screen, it switches to another screen.
-
The displayed content may differ from the actual vehicle.
Power Switch Not Switched OFF (STOP) Warning Beep
If the driver's door is opened with the power switch switched to ACC, a beep will be heard continuously in the cabin to notify the driver that the power switch has not been switched OFF (STOP). Under this condition, the keyless entry system will not operate, the vehicle cannot be locked, and the lead-acid battery voltage will be depleted.
Key Removed from Vehicle Warning Beep
Vehicles with advanced keyless function
If the key is taken out of the vehicle while the power switch is switched to ACC or ON, and all the doors are closed, a sound is activated 6 times outside of the vehicle and a sound is activated 1 time in the vehicle.
Vehicles without advanced keyless function
If the key is taken out of the vehicle while the power switch is switched to ACC or ON, and all the doors are closed, a sound is activated 1 time in the vehicle.
Make sure that you leave the vehicle while carrying the key, or switch the power switch OFF.
Shift Position Warning Beep
A warning sound is activated when the selector lever position and the shift position of the vehicle do not match.
Check the selector lever position.
Selector Lever Not In P or N Reminder Warning Beep
A warning sound is activated if the following operations are performed while the selector lever is in a position other than P.
-
The power switch is switched OFF while the EV system is operating.
-
The driver’s seat belt is unfastened and the driver’s door is opened.
Check the selector lever position.
Vehicle Problem Warning Beep
If any of the following problems occur, a warning beep is activated. Check the information regarding the warning indication in the instrument cluster or on the center display.
-
Brake system problem
-
Electric Parking Brake (EPB) problem
-
Shift control system problem
-
EV system problem
-
Charging system problem
-
Approaching vehicle audible system problem
Rear Cross Traffic Alert (RCTA) Warning Beep (Some Models)
The Rear Cross Traffic Alert (RCTA) warning beep is activated if there is a possibility of collision with a vehicle approaching from the rear on the left and right sides of the vehicle.
