Instrument Cluster and Display

Indicates the discharge/charge status.

The higher the amount of charge while the EV system is regenerating power, the more the power meter needle is in the CHARGE zone. The higher the amount of discharge while discharging, such as the accelerator pedal is depressed, the more the power meter needle is in the POWER zone.

1. CHARGE zone

2. POWER zone

The CHARGE indicators indicate the electrical power which can be generated by regenerative braking, and the POWER indicators indicate the motor output status.

1. CHARGE indicators

2. POWER indicators

The CHARGE indicators turns off in stages when the power generated by regenerative braking cannot charge the high voltage battery. The POWER indicators turn off in stages when the motor output is restricted.

1. Multi-information Display

2. INFO switch

The multi-information display indicates the following information.

• Speedometer

• Odometer

• Trip meter

• Outside temperature

• Remaining high voltage battery power

• Distance-to-full discharge

• Average energy efficiency

• Instantaneous energy efficiency

• Charge status display

• i-ACTIVSENSE Display

• Compass Display

• Door-Ajar/Liftgate-Ajar Warning Indication^*1

• Message Display

1. Displayed when opening door/liftgate.

The screen content changes each time the INFO switch is pressed.

1. Basic display

2. Drive information display

3. i-ACTIVSENSE display

4. Charge status display^*1

5. Message display^*2

1. Displays only while charge connector is connected.

2. Displayed only when a warning occurs.