Instrument Cluster and Display

Instrument Cluster

Multi-information Display

  1. Multi-information Display

  2. INFO switch

 

The multi-information display indicates the following information.

  • Speedometer

  • Odometer

  • Trip meter

  • Outside temperature

  • Remaining high voltage battery power

  • Distance-to-full discharge

  • Average energy efficiency

  • Instantaneous energy efficiency

  • Charge status display

  • i-ACTIVSENSE Display

  • Compass Display

  • Door-Ajar/Liftgate-Ajar Warning Indication*1

  • Message Display

  1. Displayed when opening door/liftgate.

The screen content changes each time the INFO switch is pressed.

 

  1. Basic display

  2. Drive information display

  3. i-ACTIVSENSE display

  4. Charge status display*1

  5. Message display*2

  1. Displays only while charge connector is connected.

  2. Displayed only when a warning occurs.

Odometer, Trip Meter and Trip Meter Selector

You can switch between the odometer and trip meter display using the TRIP switch.

 

  1. TRIP switch

  2. Odometer display

  3. Trip meter A display

  4. Trip meter B display

Odometer

The odometer records the total distance the vehicle has been driven.

Trip meter

The driving distance for a specified interval is indicated. Two types (TRIP A, TRIP B) of interval distance can be measured.

 

For instance, trip meter A can record the distance from the point of origin, and trip meter B can record the distance from where the high voltage battery was charged.

 

When trip meter A is selected, TRIP A will be displayed. When trip meter B is selected, TRIP B will be displayed.

 

The trip meter can be reset by pressing the TRIP switch for 1.5 seconds or more while the trip meter is displayed.

 


Only the trip meters record tenths of kilometers (miles).

Distance to full discharge

The remaining distance to full discharge is calculated and displayed based on the current, remaining charge of the high voltage battery and the energy efficiency.

 

 


  • The indicated remaining distance-to-full discharge is an estimate. The remaining distance-to-full discharge differs depending on conditions such as the driving conditions, surrounding environment, and the climate control system use. Also, if the needle in the remaining charge level gauge for the high voltage battery is near 0 or a message is displayed on the multi-information display, charge the battery as soon as possible even if the numerical value for the remaining distance-to-full discharge is of a sufficient level.

  • If there is no past energy efficiency information, such as after first purchasing your vehicle or the information was deleted when disconnecting the lead-acid battery terminal, the actual remaining distance to full discharge range may differ from the charge level indicated.

Average Energy Efficiency

The average energy efficiency is calculated every 30 seconds from the total traveled distance and the total electrical power consumption since the vehicle was purchased or the past data was reset, and the rate is displayed.

The average energy efficiency is also indicated by a red arrow on the instantaneous energy efficiency gauge.

 

 

 

To reset the displayed average energy efficiency data, press the INFO switch for 1.5 seconds or longer. After resetting the data, - - - kWh/100 km (- - - mile/kWh) is displayed before the average energy efficiency is recalculated and displayed.

Message Display

A message such as the system operation status, a malfunction, or an abnormality is indicated.

Warning/indicator light in instrument cluster turns on/flashes or symbol is indicated on display at same time as message

Check the information regarding the warning/indicator light or indicated symbol.

Refer to If a Warning Indication/Warning Lights (Search).

Refer to If a Indication/Indicator Lights (Search).

Message only is indicated on display

Follow the instructions indicated on the display. For the display content, refer to the next page.

Refer to If a Message Indicated on Multi-information Display (Search).

Page top