Warning/Indicator Lights and Warning Sounds
If a Warning Light Turns On or Flashes
If a Warning Light Turns On or Flashes
If any warning light turns on/flashes, take appropriate action for each light. There is no problem if the light turns off, however if the light does not turn off or turns on/flashes again, consult an Authorized Mazda Dealer.
If the warning light/indicator light turns on or flashes, park the vehicle in a safe place immediately and take appropriate measures.
Continuing to drive the vehicle while ignoring the illumination/flashing of the warning light/indicator light is dangerous because a problem may occur to a vehicle system, or it could lead to an accident.
The details for some warnings can be viewed on the center display or multi-information display in the instrument cluster.
Center display
-
Select “Information” on the home screen.
-
Select “Vehicle Status Monitor”.
-
Select the applicable warning to view the warning details.
Multi-information display
-
Press the INFO switch on the steering switch to display the warning indication screen.
Refer to Multi-information Display (Search).
Brake System Warning Indication/Warning Light
This warning has the following functions:
Warning light inspection
For an operation check, make sure that the light turns on when the power switch is switched on and turns off a few seconds later, or when the EV system is started.
When the light turns on
If the brake system warning light remains illuminated the brake fluid may be low or there could be a problem with the brake system. Park the vehicle in a safe place immediately and contact an Authorized Mazda Dealer.
Refer to Inspecting Brake Fluid Level (Search).
Do not drive with the brake system warning light illuminated. Contact an Authorized Mazda Dealer to have the brakes inspected as soon as possible:
Driving with the brake system warning light illuminated is dangerous. It indicates that your brakes may not work at all or that they could completely fail at any time. If this light remains illuminated, after checking that the parking brake is fully released, have the brakes inspected immediately.
-
In addition, the effectiveness of the braking may diminish so you may need to depress the brake pedal more strongly than normal to stop the vehicle.
-
When starting the EV system, the brake system warning light may turn on and the warning indication may be displayed. In this case, park the vehicle in a safe location and release the brake pedal.
If the brake system warning light/warning indication does not turn off even after parking the vehicle, have the vehicle inspected by an Authorized Mazda Dealer.
Lead-acid Battery Charging System Warning Indication/Warning Light
The lead-acid battery charging system warning indication/warning light displays/turns on if the charging system has a malfunction while the EV system is operating.
Drive to the side of the road and park off the right-of-way. Consult an Authorized Mazda Dealer.
Do not drive the vehicle with the lead-acid battery charging system warning indication/warning light displayed/turned on:
Otherwise, the EV system could stop unexpectedly and the parking lock may not operate which could result in an accident.
EV System Problem Warning Indication/Warning Light
“EV System Malfunction. Have the Vehicle Inspected” is displayed
The indication/light displays/turns on if the system has a problem.
Have your vehicle inspected by an Authorized Mazda Dealer.
“EV System Malfunction. Stop the Vehicle in a Safe Location” is displayed
The indication/light displays/turns on if the system has a problem.
Park the vehicle in a safe place immediately and contact an Authorized Mazda Dealer.
“Electrical Leakage in EV System Detected Stop the Vehicle in a Safe Location” is displayed
The indication/light displays/turns on if the system has a problem.
Park the vehicle in a safe place immediately and contact an Authorized Mazda Dealer.
Do not open the hood:
If you touch something in the motor compartment, it could lead to an electrical shock resulting in an accident.
If the light turns on while driving, the EV system cannot be started when the power switch is switched OFF once.
High Voltage Battery Temperature Warning Indication
“Excessive High Voltage Battery Temperature. Drive Slowly” is displayed
The indication displays if the high voltage battery temperature is excessively high.
Drive slowly to reduce load on the high voltage battery.
Stop the vehicle in a safe place if necessary. If the indication remains displayed, the system may have a problem. Have the vehicle inspected by an Authorized Mazda Dealer.
“High Voltage Battery Temperature Is Low Acceleration Is Limited” is displayed
The indication displays if the high voltage battery temperature is excessively low.
The vehicle speed may not increase even if the accelerator pedal is depressed because the motor output is restricted.
If the indication remains displayed, the system may have a problem. Have the vehicle inspected by an Authorized Mazda Dealer.
Output Restriction Warning Indication/Warning Light
“Acceleration Limited” displays/turns on
The indication/light displays/turns on under the following conditions. The vehicle speed may not increase even if the accelerator pedal is depressed because the motor output is restricted.
-
EV system is protected from overheating
-
High voltage battery level is low
-
High voltage battery temperature is low
“Acceleration Limited” displays/flashing
If the vehicle continues to be driven with the output restriction warning indication/warning light turned on, the output restriction warning light flashes.
The vehicle speed may not increase even if the accelerator pedal is depressed because the motor output is further restricted compared to the condition in which the output restriction warning light turns on.
“Excessive EV System Temp. Acceleration Limited Avoid Moving at Very Low Speeds. Depress Brake When Not Moving” or “Vehicle Cannot Hold Position. Depress Brake Pedal to Avoid Rolling” displays/turns on
When the vehicle is stopped on an upslope or the vehicle is driven at low speed on an upslope with the selector lever in the D or R position, the indication/light may display/turn on.
If necessary, park the vehicle in a safe place and let the EV system cool down because the output is restricted until the EV system returns to the normal temperature.
When the output restriction warning indication/warning light displays/turns on or flashes, check the safety of the surroundings:
The motor output decreases and the vehicle speed decreases resulting in an accident. If the vehicle cannot be driven safety, stop the vehicle in a safe place.
Power Steering Malfunction Indication/Indicator Light
The electric power steering malfunction indication/indicator light displays/turns on if the electric power steering has a malfunction.
If the electric power steering malfunction indication/indicator light displays/turns on, stop the vehicle in a safe place and switch the power switch OFF.
There is no problem if the display/illumination of the electric power steering malfunction indication/indicator light turns off when the EV system is restarted after some time has passed. If the electric power steering malfunction indication/indicator light displays/turns on even after the EV system is restarted, contact an Authorized Mazda Dealer.
-
If the message is displayed, the power steering will not operate normally. In this case, the steering wheel can still be operated, however, the operation may feel heavy compared to normal, or the steering wheel could vibrate when turning.
-
Repeatedly jerking the steering wheel left and right while the vehicle is stopped or moving extremely slowly will cause the power steering system to go into protective mode which will make the steering feel heavy, but this does not indicate a problem. If this occurs, park the vehicle safely and wait several minutes for the system to return to normal.
ABS Warning Indication/Warning Light
If the ABS warning light stays on while you're driving, the ABS control unit has detected a system malfunction. If this occurs, your brakes will function normally as if the vehicle had no ABS.
Should this happen, consult an Authorized Mazda Dealer as soon as possible.
The brake assist system does not operate while the ABS warning light is illuminated.
Brake Control System Warning Indication/Warning Light
The warning light illuminates when the system has a malfunction. Have your vehicle inspected at an Authorized Mazda Dealer.
Electric Parking Brake (EPB) Indication/Indicator Light
This warning has the following functions:
Parking brake warning/Indicator light inspection
If the electric parking brake (EPB) indicator light remains on even with the parking brake released, the system may have a malfunction. Have the vehicle inspected by an Authorized Mazda Dealer.
When the light is flashing
The light flashes if the Electric Parking Brake (EPB) has a malfunction. If the light remains flashing even if the Electric Parking Brake (EPB) switch is operated, consult an Authorized Mazda Dealer as soon as possible.
Brake Override Warning Indication
This message is displayed when the accelerator pedal and brake pedal are depressed at the same time while driving.
Release the accelerator pedal and depress the brake pedal.
Air Bag/Seat Belt Pretensioner System Warning Indication/Warning Light
A system malfunction is indicated if the warning light constantly flashes, constantly turns on or does not turn on at all when the power switch is switched ON. If any of these conditions occurs, consult an Authorized Mazda Dealer as soon as possible. The system may not operate in an accident.
Never tamper with the air bag/pretensioner systems and always have an Authorized Mazda Dealer perform all servicing and repairs:
Self-servicing or tampering with the systems is dangerous. An air bag/pretensioner could accidentally activate or become disabled causing serious injury or death.
Tire Pressure Monitoring System (TPMS) Warning Indication/Warning Light (Flashing)
If there is a problem with the TPMS or the voltage of a tire pressure sensor decreases, the TPMS warning light flashes and a message is displayed on the multi-information display. Have your vehicle inspected by an Authorized Mazda Dealer.
Do not drive the vehicle at high speeds if the TPMS warning light turns on or flashes:
Driving the vehicle at high speeds while the TPMS warning light is turned on or flashing is dangerous because the brake performance and the steering wheel operability will be reduced. If the vehicle is driven at high speeds or the brakes are suddenly applied, it could lead to an accident. Gradually apply the brakes to lower the vehicle's speed.
Do not ignore the TPMS warning light when it is turned on or flashing:
Continuing to drive the vehicle while ignoring the illumination/flashing of the TPMS warning light is dangerous because a tire may burst which could lead to an accident. Take appropriate measures as soon as possible.
KEY Warning Indication/Warning Light (Red)
“Keyless Entry System Malfunction. Have the Vehicle Inspected” is displayed
This message is displayed if the system has a problem.
Contact an Authorized Mazda Dealer.
If the power switch indicator light (amber) flashes at the same time, the EV system may not start. Have the vehicle inspected by an Authorized Mazda Dealer as soon as possible.
Refer to When Stopping the EV System (Search).
“Key Not Detected” is displayed
The KEY warning indication/warning light (red) displays/turns on under the following conditions. Bring the key into the operation range.
-
The key is outside of the operation range or it is placed in the cabin but in a position where it is difficult to be detected.
-
Without the power switch switched OFF, the key is taken out of the cabin, then all the doors are closed.
i-ACTIVSENSE Warning Indication/Warning Light (Some Models)
The indication displays if the system has a malfunction.
Check the reason for the indication displaying on the center display or multi-information display.
Refer to If a Warning Light Turns On or Flashes (Search).
Seat Belt Warning Indication/Warning Light (Front seat)
The seat belt warning light turns on if the driver or front passenger's seat is occupied and the seat belt is not fastened with the power switch switched ON.
If the driver or front passenger's seat belt is unfastened (only when the front passenger's seat is occupied) and if the vehicle is driven at about 20 km/h (12 mph) or faster, or about 10 km/h (6 mph) or faster for a continuous 30 seconds, with the seat belt unfastened, the warning light flashes for a certain period. After a short time, the warning light stops flashing, but remains illuminated.
-
The warning light flashes for about 6 seconds if the driver or front passenger's seat is not fastened when the power switch is switched ON.
-
Placing heavy items on the front passenger's seat may cause the front passenger's seat belt warning function to operate depending on the weight of the item.
-
To allow the front passenger occupant classification sensor to function properly, do not place and sit on an additional seat cushion on the front passenger's seat. The sensor may not function properly because the additional seat cushion could cause sensor interference.
-
If a small child is seated on the front passenger's seat, the warning light may not operate.
Action to be taken
Fasten the seat belts.
Seat Belt Warning Light (Rear seat) (Red)
If the rear seat belts are not fastened while the power switch is switched ON , the driver and the passenger are alerted by the warning light.
The warning light operates even if there is no passenger on the rear seat.
If a rear seat belt is not fastened by a certain period of time after the EV system has been started, the warning light turns off.
Action to be taken
Fasten the seat belts.
Low Washer Fluid Level Warning Indication/Warning Light (Some Models)
This warning light indicates that little washer fluid remains.
Action to be taken
Add washer fluid (Search).
Message Indicated on Multi-information Display
Liftgate Door-lock Switch Inoperable Warning Beep (With the advanced keyless function)
When the door-lock switch on the liftgate is pressed under any of the following conditions, a warning sound is activated.
-
The power switch is switched to a position other than OFF.
-
Any door is open.
Make sure that none of the above conditions are present, and then press the door-lock switch again.
Key Left-in-vehicle Warning Beep (With the advanced keyless function)
If all the doors and luggage compartment are locked using another key while the key is left in the cabin, the beep which sounds outside of the vehicle will be heard for about 10 seconds to notify the driver that the key is in the cabin. In this case, take out the key by opening the door. A key taken out of the vehicle using this method may not operate because its functions have been temporarily stopped. To restore the key's functions, perform the applicable procedure (Search).
Remaining High Voltage Battery Power Warning Beep
When the remaining high voltage battery power warning indication displays, a warning beep is activated once at the same time.
Selector Lever Not In P or N Reminder Warning Beep
Front Cross Traffic Alert (FCTA) Warning Beep (Some Models)
The Front Cross Traffic Alert (FCTA) warning beep is activated if there is a possibility of collision with a vehicle approaching from the front on the left and right sides of the vehicle.
Rear Cross Traffic Alert (RCTA) Warning Beep (Some Models)
The Rear Cross Traffic Alert (RCTA) warning beep is activated if there is a possibility of collision with a vehicle approaching from the rear on the left and right sides of the vehicle.
Lane/Road Departure Warning Beep (Some Models)
The warning beep is activated when the system determines that the vehicle may depart from the lane or the road.
Check whether the vehicle has not deviated from the driving lane/road.
Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) System Warnings (Some Models)
The Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) system warnings notify the driver of system malfunctions and cautions on use when required.
Check based on the beep sound.
|
Warning beep type |
Notification content |
|---|---|
|
The beep sounds 1 time while the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) is operating. |
If a malfunction occurs in the system, make sure that the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) has been canceled. |
|
The beep sounds intermittently while the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) is operating. |
The distance between your vehicle and the vehicle ahead is too close. Check the safety of the surrounding area and reduce vehicle speed. |
Excessive Speed Warning (Some Models)
If the vehicle speed exceeds the speed limit sign displayed in the active driving display/instrument cluster, the area around the speed limit sign flashes in amber and the warning sound is activated at the same time. If the vehicle speed continues to exceed the displayed speed limit sign, the indication stops flashing and remains on.
Collision warning (Some Models)
If there is a possibility of a collision with a vehicle ahead, a warning sound is activated at the same time as the warning indications are displayed in the instrument cluster or active driving display.
Door-ajar Warning Beep
A warning beep is activated if the vehicle is driven with any door or liftgate ajar. Drive the vehicle after closing the doors and liftgate.
Battery Saving Mode Warning Sound
A warning sound is activated when the vehicle goes into Battery Saving Mode. Refer to Message Indicated on Multi-information Display (Search).
The warning sound will stop just after starting the EV system.
