Warning/Indicator Lights and Warning Sounds
If a Warning Light Turns On or Flashes
ABS Warning Indication/Warning Light
If the ABS warning light stays on while you're driving, the ABS control unit has detected a system malfunction. If this occurs, your brakes will function normally as if the vehicle had no ABS.
Should this happen, consult an Authorized Mazda Dealer as soon as possible.
The brake assist system does not operate while the ABS warning light is illuminated.
Master Warning Indication
The indication displays if the system has a malfunction.
Check the reason for the indication displaying on the center display or multi-information display.
Refer to If a Warning Light Turns On or Flashes (Search).
Brake Override Warning Indication
This message is displayed when the accelerator pedal and brake pedal are depressed at the same time while driving.
Release the accelerator pedal and depress the brake pedal.
i-ACTIVSENSE Warning Indication/Warning Light (Some Models)
The indication displays if the system has a malfunction.
Check the reason for the indication displaying on the center display or multi-information display.
Refer to If a Warning Light Turns On or Flashes (Search).
Exterior Light Warning Indication/Warning Light
This light illuminates if there is a malfunction in the exterior lights (except license plate lights). Have your vehicle inspected by an Authorized Mazda Dealer.
Do not drive the vehicle while an exterior light has a malfunction. Poor visibility, and not being able to signal braking and turns may cause an accident. In addition, if the vehicle is driven with the lights not turned on, it may conflict with laws and regulations due to poor maintenance.
Low Washer Fluid Level Warning Indication/Warning Light (Some Models)
This warning light indicates that little washer fluid remains.
Action to be taken
Add washer fluid (Search).
Door-Ajar/Liftgate-Ajar Warning Indication/Warning Light
Liftgate Door-lock Switch Inoperable Warning Beep (With the advanced keyless function)
When the door-lock switch on the liftgate is pressed under any of the following conditions, a warning sound is activated.
-
The power switch is switched to a position other than OFF.
-
Any door is open.
Make sure that none of the above conditions are present, and then press the door-lock switch again.
Reverse Position Warning Beep
The warning beep is activated when the power switch is switched ON and the selector lever is in the R position.
Front Cross Traffic Alert (FCTA) Warning Beep (Some Models)
The Front Cross Traffic Alert (FCTA) warning beep is activated if there is a possibility of collision with a vehicle approaching from the front on the left and right sides of the vehicle.
Lane/Road Departure Warning Beep (Some Models)
The warning beep is activated when the system determines that the vehicle may depart from the lane or the road.
Check whether the vehicle has not deviated from the driving lane/road.
