Windows
Power Windows
Auto-opening/Closing
To fully open the window automatically, press the switch completely down, then release. The window will fully open automatically.
To fully close the window automatically, pull the switch completely up, then release. The window will fully close automatically.
To stop the window partway, pull or press the switch in the opposite direction and then release it.
Power window system initialization procedure
If you operate the switch any number of times with the power window not fully closed, the window may no longer fully open/close automatically.
The power window auto function will only resume on a power window that has been reset.
-
Switch the power switch ON.
-
Make sure that the power window lock switch located on the driver's door is not depressed.
-
Press the switch and fully open the window.
-
Pull up the switch to fully close the window and continue holding the switch for about 2 seconds after the window fully closed.
-
Make sure that the power windows operate correctly using the door switches.
Sunshade
The sunshade can be opened and closed by hand.
The sunshade opens at the same time as the moonroof slides open, but it must be closed by hand.

-
Sunshade