Warning/Indicator Lights and Warning Sounds
Lead-acid Battery Charging System Warning Indication/Warning Light
Exterior Light Warning Indication/Warning Light
This light illuminates if there is a malfunction in the exterior lights (except license plate lights). Have your vehicle inspected by an Authorized Mazda Dealer.
Do not drive the vehicle while an exterior light has a malfunction. Poor visibility, and not being able to signal braking and turns may cause an accident. In addition, if the vehicle is driven with the lights not turned on, it may conflict with laws and regulations due to poor maintenance.
Seat Belt Warning Light (Rear seat) (Red)
If the rear seat belts are not fastened while the power switch is switched ON , the driver and the passenger are alerted by the warning light.
The warning light operates even if there is no passenger on the rear seat.
If a rear seat belt is not fastened by a certain period of time after the EV system has been started, the warning light turns off.
Action to be taken
Fasten the seat belts.
Low Washer Fluid Level Warning Indication/Warning Light (Some Models)
This warning light indicates that little washer fluid remains.
Action to be taken
Add washer fluid (Search).
KEY Indicator Light (Green) (Flashing)
“Low Key Fob Battery. Replace Battery” is displayed/When the light is flashing
When the key battery is low, the indication is displayed when the power switch is switched OFF.
Action to be taken
Replace the key battery.
Seat Belt Warning Beep
Front seat
If the driver's seat belt is not fastened when the power switch is switched ON, a beep sound will be heard for about 6 seconds. If the driver or the front passenger's seat belt is not fastened and if the vehicle is driven at about 20 km/h (12 mph) or faster, or about 10 km/h (6 mph) or faster for a continuous 30 seconds, with the seat belt unfastened, a sound is activated continuously for a certain period.
Until a seat belt is fastened or a given period of time has elapsed, the beep sound will not stop even if the vehicle speed falls below 20 km/h (12 mph).
-
To allow the front passenger occupant classification sensor to function properly, do not place and sit on an additional seat cushion on the front passenger's seat. The sensor may not function properly because the additional seat cushion could cause sensor interference.
-
If a small child is seated on the front passenger's seat, the warning beep may not operate.
Rear seat
The warning beep only sounds if a seat belt is unfastened after being fastened.
Key Left-in-vehicle Warning Beep (With the advanced keyless function)
If all the doors and luggage compartment are locked using another key while the key is left in the cabin, the beep which sounds outside of the vehicle will be heard for about 10 seconds to notify the driver that the key is in the cabin. In this case, take out the key by opening the door. A key taken out of the vehicle using this method may not operate because its functions have been temporarily stopped. To restore the key's functions, perform the applicable procedure (Search).
Remaining High Voltage Battery Power Warning Beep
When the remaining high voltage battery power warning indication displays, a warning beep is activated once at the same time.
Brake Override Warning Beep
A warning beep is activated when the accelerator pedal and brake pedal are depressed at the same time while driving. Only depress the brake pedal.
Rear Cross Traffic Alert (RCTA) Warning Beep (Some Models)
The Rear Cross Traffic Alert (RCTA) warning beep is activated if there is a possibility of collision with a vehicle approaching from the rear on the left and right sides of the vehicle.
Lane/Road Departure Warning Beep (Some Models)
The warning beep is activated when the system determines that the vehicle may depart from the lane or the road.
Check whether the vehicle has not deviated from the driving lane/road.
Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) System Warnings (Some Models)
The Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) system warnings notify the driver of system malfunctions and cautions on use when required.
Check based on the beep sound.
|
Warning beep type |
Notification content |
|---|---|
|
The beep sounds 1 time while the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) is operating. |
If a malfunction occurs in the system, make sure that the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) has been canceled. |
|
The beep sounds intermittently while the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) is operating. |
The distance between your vehicle and the vehicle ahead is too close. Check the safety of the surrounding area and reduce vehicle speed. |
