Instrument Cluster and Display

1. Power Meter
2. Multi-information Display
3. High Voltage Battery Power Gauge
4. High Voltage Battery Temperature Gauge
5. Dashboard Illumination Switch
6. Speedometer
7. TRIP Switch

The speedometer indicates the speed of the vehicle.

Indicates the discharge/charge status.

The higher the amount of charge while the EV system is regenerating power, the more the power meter needle is in the CHARGE zone. The higher the amount of discharge while discharging, such as the accelerator pedal is depressed, the more the power meter needle is in the POWER zone.

1. CHARGE zone

2. POWER zone

The CHARGE indicators indicate the electrical power which can be generated by regenerative braking, and the POWER indicators indicate the motor output status.

1. CHARGE indicators

2. POWER indicators

The CHARGE indicators turns off in stages when the power generated by regenerative braking cannot charge the high voltage battery. The POWER indicators turn off in stages when the motor output is restricted.

1. Multi-information Display

2. INFO switch

The multi-information display indicates the following information.

• Speedometer

• Odometer

• Trip meter

• Outside temperature

• Remaining high voltage battery power

• Distance-to-full discharge

• Average energy efficiency

• Instantaneous energy efficiency

• Charge status display

• i-ACTIVSENSE Display

• Compass Display

• Door-Ajar/Liftgate-Ajar Warning Indication^*1

• Message Display

1. Displayed when opening door/liftgate.

The screen content changes each time the INFO switch is pressed.

1. Basic display

2. Drive information display

3. i-ACTIVSENSE display

4. Charge status display^*1

5. Message display^*2

1. Displays only while charge connector is connected.

2. Displayed only when a warning occurs.

You can switch between the odometer and trip meter display using the TRIP switch.

1. TRIP switch

2. Odometer display

3. Trip meter A display

4. Trip meter B display

Odometer

The odometer records the total distance the vehicle has been driven.

Trip meter

The driving distance for a specified interval is indicated. Two types (TRIP A, TRIP B) of interval distance can be measured.

For instance, trip meter A can record the distance from the point of origin, and trip meter B can record the distance from where the high voltage battery was charged.

When trip meter A is selected, TRIP A will be displayed. When trip meter B is selected, TRIP B will be displayed.

The trip meter can be reset by pressing the TRIP switch for 1.5 seconds or more while the trip meter is displayed.

 

---

Only the trip meters record tenths of kilometers (miles).

Close Note

View Note

Displays the high voltage battery temperature. The blue range of the gauge indicates that the high voltage battery temperature is low and the red range indicates that it is high and overheating.

 

---

When the high voltage battery temperature is high or low, the output may be restricted to protect the EV system.

Close Note

View Note

The remaining power of the high voltage battery is indicated when the power switch is switched ON.

When the high voltage battery is fully charged, F is indicated. As the level lowers, the needle approaches E. When the high voltage battery charge decreases to 1/4 or lower, we recommend charging the battery.

1. F (Fully charged)

2. 1/4 charged

3. E (Fully discharged)

When the remaining charge of the high voltage battery is low, output may be restricted. If the output is restricted, charge the battery as soon as possible.

 

---

• After charging, it may require some time for the needle to stabilize.

• The arrow indicates that the charging port is on the right side.

Close Note

View Note

When the power switch is switched ON, the outside temperature is displayed.

 

---

• Under the following conditions, the outside temperature display may differ from the actual outside temperature depending on the surroundings and vehicle conditions:

  • Significantly cold or hot temperatures.

  • Sudden changes in outside temperature.

  • The vehicle is parked.

  • The vehicle is driven at low speeds.

Close Note

View Note

Changing the Temperature Unit of the Outside Temperature Display

The outside temperature unit can be switched between Celsius and Fahrenheit.

Settings can be changed by operating the center display screen.

Refer to the Settings section in the Mazda Connect Owner's Manual.

The remaining amount of power in the high voltage battery is indicated by a percentage.

The remaining distance to full discharge is calculated and displayed based on the current, remaining charge of the high voltage battery and the energy efficiency.

 

---

• The indicated remaining distance-to-full discharge is an estimate. The remaining distance-to-full discharge differs depending on conditions such as the driving conditions, surrounding environment, and the climate control system use. Also, if the needle in the remaining charge level gauge for the high voltage battery is near 0 or a message is displayed on the multi-information display, charge the battery as soon as possible even if the numerical value for the remaining distance-to-full discharge is of a sufficient level.

• If there is no past energy efficiency information, such as after first purchasing your vehicle or the information was deleted when disconnecting the lead-acid battery terminal, the actual remaining distance to full discharge range may differ from the charge level indicated.

Close Note

View Note

The instantaneous energy efficiency while driving the vehicle is calculated from the electrical power consumption and displayed.

 

---

• Indicates the 0 position when the vehicle speed is about 5 km/h (3 mph) or slower.

• The red arrow on the scale indicates the average energy efficiency.

Close Note

View Note

Displays the system status.

• Refer to Lane Departure Warning System (LDWS) (Search).

• Refer to Blind Spot Monitoring (BSM) (Search).

• Refer to Traffic Sign Recognition System (TSR) (Search).

• Refer to Distance & Speed Alert (DSA) (Search).

• Refer to Driver Attention Alert (DAA) (Search).

• Refer to Driver Monitoring (DM) (Search).

• Refer to Front Cross Traffic Alert (FCTA) (Search).

• Refer to Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) (Search).

• Refer to Traffic Jam Assist (TJA) (Search).

• Refer to Lane-keep Assist System (LAS) (Search).

• Refer to Emergency Lane Keeping (ELK) (Search).

• Refer to Smart Brake Support (SBS) (Search).

• Refer to Cruise Control (Search).

The direction the vehicle is moving is displayed in one of eight directions while the vehicle is being driven.

A message such as the system operation status, a malfunction, or an abnormality is indicated.

Warning/indicator light in instrument cluster turns on/flashes or symbol is indicated on display at same time as message

Check the information regarding the warning/indicator light or indicated symbol.

Refer to If a Warning Indication/Warning Lights (Search).

Refer to If a Indication/Indicator Lights (Search).

Message only is indicated on display

Follow the instructions indicated on the display. For the display content, refer to the next page.

Refer to If a Message Indicated on Multi-information Display (Search).

Instrument Cluster varies depending on model and specifications.

1. Instrument Cluster

2. Front Center of Headliner

Warning lights will appear in any of the highlighted areas

These lights turn on or flash to notify the user of the system operation status or a system malfunction.

Signal	Warning	Refer to
	Brake System Warning Indication/Warning Light*1	(Search)
	ABS Warning Indication/Warning Light*1	Electronic Brake Force Distribution System Warning (Search)
		ABS warning (Search)
	Lead-acid Battery Charging System Warning Indication/Warning Light*1	(Search)
	EV System Problem Warning Indication/Warning Light*1	(Search)
	High Voltage Battery Temperature Warning Indication	(Search)
	Remaining High Voltage Battery Power Warning Indication/Warning Light*1	(Search)
	Charging System Warning Indication/Warning Light*1	(Search)
	Output Restriction Warning Indication/Warning Light*1	(Search)
	Power Steering Malfunction Indication/Indicator Light*1	(Search)
	Shift Control System Warning Indication/Warning light*1	(Search)
	Master Warning Indication	(Search)
	Brake Control System Warning Indication/Warning Light*1	(Search)
	Brake Override Warning Indication	(Search)
	Air Bag/Front Seat Belt Pretensioner System Warning Indication/Warning Light*1	(Search)
	Tire Pressure Monitoring System (TPMS) Warning Indication/Warning Light*1	Flashing (Search)
		Turns on (Search)
(Red)	KEY Warning Indication/Warning Light*1	(Search)
(Amber)	High Beam Control System (HBC) Warning Indication/Warning Light*1 (Some Models)	(Search)
	i-ACTIVSENSE Warning Indication/Warning Light*1	(Search)
	Exterior Light Warning Indication/Warning Light*1	(Search)
	Seat Belt Warning Indication/Warning Light (Front seat)	(Search)
(Red)	Seat Belt Warning Light (Rear seat)	(Search)
	Low Washer Fluid Level Warning Indication/Warning Light (Some Models)	(Search)
	Door-Ajar Warning Indication	(Search)
	Liftgate-Ajar Warning Indication	(Search)
	Door-Ajar Warning Light	(Search)

1. The light turns on when the power switch is switched ON for an operation check, and turns off a few seconds later or when the EV system is started. If the light does not turn on or remains on, have the vehicle inspected by an Authorized Mazda Dealer.

These lights turn on or flash to notify the user of the system operation status or a system malfunction.

Signal	Indicator	Refer to
(Green)	Seat Belt Indicator Light (Rear seat)	(Search)
	Front Passenger Air Bag Deactivation Indicator Light	(Search)
	Security Indicator Light	Immobilizer System (Search)
		Malfunction (Search)
(Green)	KEY Indicator Light	(Search)
	Wrench Indication/Indicator Light*1	(Search)
	Shift Position Indication	(Search)
	Lights-On Indicator Light	(Search)
	Headlight High-Beam Indicator Light	Headlight High-Low Beam (Search)
		Flashing the Headlights (Search)
	Turn Signal/Hazard Warning Indicator Lights	Turn and Lane-Change Signals (Search)
		Hazard Warning Flasher (Search)
	Electric Parking Brake (EPB) Indication/Indicator Light*1*2	(Search)
	AUTOHOLD Active Indicator Light*1	(Search)
	Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) indicator Light (Some Models)	(Search)
	Traffic Jam Assist (TJA) Indicator Light (Some Models)	(Search)
	TCS/DSC Indication/Indicator Light*1	Traction Control System (TCS) (Search)
		Dynamic Stability Control (DSC) (Search)
		Turns on (Search)
	READY Indication	(Search)
	TCS OFF Indicator Light*1	(Search)
(White)	i-ACTIVSENSE Status Symbol (Warning/Risk Avoidance Support System)	(Search)
(Green)
(Amber)
	i-ACTIVSENSE OFF Symbol (Warning/Risk Avoidance Support System)	(Search)
(Green)	High Beam Control System (HBC) Indicator Light (Some Models)	(Search)
(White)	Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) Standby Indication (Some Models)	(Search)
	Traffic Jam Assist (TJA) Standby Indication (Some Models)	(Search)
(Green)	Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) Set Indication (Some Models)	(Search)
	Traffic Jam Assist (TJA) Set Indication (Some Models)	(Search)
	Smart Brake Support (SBS) OFF Indicator Light*1 (Some Models)	(Search)
	Emergency Lane Keeping (ELK) OFF Indicator Light*1 (Some Models)	(Search)
(White)	Cruise Standby Indication (Some Models)	(Search)
(Green)	Cruise Set Indication (Some Models)	(Search)

1. The light turns on when the power switch is switched ON for an operation check, and turns off a few seconds later or when the EV system is started. If the light does not turn on or remains on, have the vehicle inspected by an Authorized Mazda Dealer.

2. The light turns on continuously when the parking brake is applied.

The wrench indication/indicator light is displayed/turns on under the following conditions.

• When the preset maintenance period has arrived.

  Refer to the Information section in the Mazda Connect Owner's Manual.

   

  ---

  • When the maintenance period arrives, have your vehicle inspected by an Authorized Mazda Dealer as soon as possible. If maintenance is neglected, a decrease in vehicle performance may occur which could cause damage. Have your vehicle inspected before the maintenance period arrives.

  Close Caution

  View Caution